Tag Archives: VBox Spreaders

BONNELL 16′ X 62″ VBOX SALT SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc

BV-SERIES V-BOX SPREADER OPTIONS

    OPTIONS INSTALLED ON STOCK UNITS S/N 2548 & 2549

  • 20" Poly Disc in Lieu of the 18" Steel
  • Inverted V
  • Galvanized Top Screens



IN STOCK BV-16-62 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO TRUNIONCUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-16-6216'62"144"12.83540 LBS$12,724

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


12.8 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Stainless Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Carbon Steel Painted Orange, All Options Painted Black


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

BONNELL 10′ X 56″ VBOX SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc


IN STOCK BV-10-56 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-10-5610'5684"6.72480 LBS$9,500

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


6.7 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Carbon Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Painted Orange, All Options Painted Black


Have a 20" Poly Disc and Inverted V


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

BV-Series V-Box Spreader

 

pdf-button

  • icon
  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc

BV-SERIES V-BOX SPREADEROPTIONS

    Plow Lift Options

  • Chain
  • 10-gauge stainless steel V-box construction
  • Sloping front
  • Auger feed
  • Observation platform
  • 20" poly spinner
  • Cabshield
  • Grease extension to rear
  • Catwalks
  • Light kits
  • Winch for spinner
  • Pre-wet system
  • Mounting kit
  • Inverted V
  • Chain oiler
  • Wireless camera system
  • Belt over conveyor chain
  • Engine over hydraulic systems
  • Rear diverter
  • Top mount spinner motor



BV - SERIES SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
BV-10-5010'50"84"5.52385 LBS
BV-10-5610'5684"6.72480 LBS
BV-10-6210'62'84"7.92575 lbs
BV-11-5011'50"96"6.12525 LBS
BV-11-5611'56"96"7.42625 LBS
BV-11-6211'62"96"8.72725 LBS
BV-12-5012'50"108"6.62695 LBS
BV-12-5612'56"108"8.12800 LBS
BV-12-6212'62"108"9.52905 LBS
BV-13-5013'50"108" C.T.7.02835 LBS
BV-13-5613'56"108" C.T.8.62945 LBS
BV-13-6213'62"108" C.T.10.43055 LBS
BV-14-5014'50"120 C.T.7.83005 LBS
BV-14-5614'56"120" C.T.9.53120 LBS
BV-14-6214'56"120" C.T.11.23235 LBS
BV-15-5015'50"132" C.T.8.33145 LBS
BV-15-5615'56"132" C.T.10.23265 LBS
BV-15-6215'62"132" C.T.12.03385 LBS

CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”