Tag Archives: V-Box Spreaders

BONNELL 16′ X 62″ VBOX SALT SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc

BV-SERIES V-BOX SPREADER OPTIONS

    OPTIONS INSTALLED ON STOCK UNITS S/N 2548 & 2549

  • 20" Poly Disc in Lieu of the 18" Steel
  • Inverted V
  • Galvanized Top Screens



IN STOCK BV-16-62 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO TRUNIONCUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-16-6216'62"144"12.83540 LBS$12,724

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


12.8 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Stainless Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Carbon Steel Painted Orange, All Options Painted Black


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

BONNELL 10′ X 56″ VBOX SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc


IN STOCK BV-10-56 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-10-5610'5684"6.72480 LBS$9,500

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


6.7 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Carbon Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Painted Orange, All Options Painted Black


Have a 20" Poly Disc and Inverted V


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

TORNADO UTV

pdf-button

  • icon
  • icon

TORNADO UTV STANDARD FEATURES

  1. Quick Connect Spinner Assembly - Gain easy access to the hitch by removing the quick connect spinner drive assembly
  2. (3)Vibrating Inverted V - A standard 12 volt vibrator is directly connect to the inverted V, providing maximum agitation to help break up clumps and ensure the smooth flow of material
  3. Standard Top Screen - Helps break up large chunks of deicing material during loading to help prevent clogging and bridging during operation
  4. Steel Frame - Heavy duty steel with electrostatic powder coated finish
  5. Fitted Tarp Cover - A fitted tarp cover helps ice control material stay dry to prevent clumping


TORNADO UTV SPREADER SPECIFICATIONS

MODELTORNADA UTV
BODY SIDE LENGTH5 1/3"
HOPPER CONSTRUCTIONPOLYETHYLENE
CAPACITY11.00 Cubic feet
DIMENSIONS OVERALL (L x W x H)64" x 48 1/2" x 27"
APPROXIMATE WEIGHT (EMPTY)280 lb
ELECTRIC MOTORDual, 12 DC Sealed
SPINNER SIZE12"
SPREADING WIDTHUp to 30"
MATERIALSalt or 50/50 Salt/Sand Mix
VEHICLE APPLICATIONUTVs

Turn Your UTV into a Winter Warrior! The WESTERN® Tornado™ UTV 11 cu ft poly hopper is built to provide top spreader performance in a sturdy, compact ice control package to help you get your job done right. Designed specifically for UTVs, the Tornado UTV poly hopper spreader delivers many of the features of the larger models, in a size that is just right for your utility vehicle.

OHV GAS ENGINE

 

pdf-button

  • icon
  • icon
  • icon

OHV GAS ENGINE CONVEYOR DELIVERY SPREADER STANDARD FEATURES

  1. Hopper - Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard
  2. Spinner - 14-gauge spinner chute assembly with three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch diameter with three welded fins. Spinner shaft of 3/4" diameter steel is mounted with sealed, self-aligning bearing
  3. Conveyor Drive - Briggs & Stratton Intek OHV air-cooled, single cylinder, four-cycle engine is mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred to the gear case through roller chain and sprockets
  4. Gear Case - The conveyor gear case has a cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants
  5. Conveyor - Heavy-duty, self-cleaning, heat-treated pintle chain with 24,000 lb. tensile strength. Two screw-type adjusters are provided to take up chain slack
  6. Easily adjustable deflectors allow customized spread patterns up to 25 ft. wide

OHV GAS ENGINE CONVEYOR DELIVERY SPREADER OPTIONS

    OPTIONAL EQUIPMENT

  • 2 Piece Hinged Hopper Screen
  • Adjustable Inverted "V"
  • Ratchet Strap Tie Downs
  • High Mount Brake Light



OHV GAS ENGINE SPREADER SPECIFICATIONS

MODEL825625
LEVEL CAPACITY1.80 Cubic Yards1.50 Cubic Yards
LENGTH115" Overall / 96" Hopper97" Overall / 78" Hopper
TOP WIDTH50.5"50.5"
MAX APPLICATION RATE7.3 cubic feet/minute7.3 cubic feet/minute
VIBRATORN/AN/A
REMOVABLE HOPPER COVER TARPOptional Optional
HOPPER SCREENSOptional Optional

Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft.spread pattern. And a big 1.50 or 1.80 yard capacity means you’ll spend your time productively, rather than constantly reloading.

TORNADO

 

pdf-button

  • icon
  • icon
  • icon

TORNADO STANDARD FEATURES

  1. Open Poly Hopper Covers protect the truck bed from material overflow during loading, Standard Top Screen breaks up large material chunks for better flow
  2. Center High Mounted Stop Light (CHMSL) is standard to meet FMVSS requirements
  3. Built in tie down loops for strapping unit to truck
  4. Chute housing includes molded alternate license plate area
  5. Includes an accessory wire for optional work light

TORNADO OPTIONS

    OPTIONS

  • Inverted Vee kit helps reduce start up loads on the drivetrain
  • Work Light Kit provides better night time visibility to rear of spreader
  • License Plate Light kit illuminates alternate license plate area
  • Vibrator kit helps remove stubborn materials



TORNADO SPREADER SPECIFICATIONS

MODEL7'8'9'
HOPPER CONSTRUCTIONPolyethylenePolyethylenePolyethylene
CAPACITY1.5 cubic yard1.8 cubic yard2.5 cubic yard
DIMENSIONS OVERALL (L x W x H)108" x 63" x 44"117" x 63" x 44"117" x 63" x 51"
APPROXIMATE WEIGHT (EMPTY)591 lb660 lb734 lb
MOTORDual ElectricDual ElectricDual Electric
SPINNER SIZE15 1/2"15 1/2"15 1/2"
CONVEYOR WIDTH16 1/2"16 1/2"16 1/2"
SPREADING WIDTHUp to 40"Up to 40"Up to 40"
MATERIALSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand Mix
VEHICLE APPLICATION3/4- & 1-Ton Pick-up Trucks3/4- & 1-Ton Pick-up TrucksDump Body or Flatbed Trucks (over 15,000 lb GVWR)

BVA V-Box

 

pdf-button

  • icon
  • icon
  • icon

BVA-SERIES V-BOX SPREADERS STANDARD FEATURES

  1. 10 Gauge hopper sides, 7 gauge longsills, 7 gauge auger trough "CS" Carbon
  2. 12 Gauge hopper sides, 10 gauge longsills, 10 gauge auger trough "SS" Carbon
  3. Direct drive motor
  4. Side swing up spinner with 18" steel spinner disc
  5. 7” diameter hard surfaced auger with three pitch settings for even unloading, four bolt self-aligning ball bearing at front of auger, greasable from the rear of spreader
  6. Top screens

BVA-SERIES SPREADER OPTIONS

  • Hand crank winch for swing up spinner
  • Pre-wet systems
  • Mounting kits
  • Ladders
  • Cabshields
  • Catwalks
  • 12 gauge stainless steel V-box construction (optional 10-gauge stainless)
  • Wireless camera system
  • Engine over hydraulic systems
  • Rear diverted
  • Top mount spinner motor
  • 20" Poly spinner
  • Doghouse cutout for dump body hoist



BVA - SERIES SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
BVA-10-4810'48"84"5.62385 LBS
BVA-10-5410'54"84"6.92480 LBS
BVA-10-6010'60"84"8.32575 lbs
BVA-11-4811'48"96"6.22525 LBS
BVA-11-5411'54"96"7.62625 LBS
BVA-11-6011'60"96"9.02725 LBS
BVA-12-4812'48"108"6.82695 LBS
BVA-12-5412'54"108"8.42800 LBS
BVA-12-6012'60"108"9.92905 LBS
BVA-13-4813'48"96" C.T.7.32835 LBS
BVA-13-5413'54"96" C.T.9.02945 LBS
BVA-13-6013'60"96" C.T.10.73055 LBS
BVA-14-4814'48"108" C.T.7.93005 LBS
BVA-14-5414'54"108" C.T.9.73120 LBS
BVA-14-6014'60"108" C.T.11.63235 LBS
BVA-15-4815'48"120" C.T.8.43145 LBS
BVA-15-5415'54"120" C.T.10.33265 LBS
BVA-15-6015'60"120" C.T.12.23385 LBS
BVA-16-4816'48"132" C.T.8.93585 LBS
BVA-16-5416'54"132" C.T.10.93705 LBS
BVA-16-6016'60"132" C.T.13.03825 LBS

The Bonnell “BVA” Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

The Bonnell “BVA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BVA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through many winters to come.

CARBON STEEL BODY

Constructed of 10 gauge steel with 45º sloping sides with 10 gauge side supports for high resistance to twisting under heavy loads.

AUGER

7” Hard faced auger with direct drive.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

INVERTED V

Standard equipment with the purchase of BVA spreader.

GREASE EXTENSION

Grease extension to the rear-standard equipment.

BVDA Dual Auger V-Box

 

pdf-button

  • icon
  • icon
  • icon

BVDA-SERIES V-BOX SPREADERS STANDARD FEATURES

  1. 10 Gauge hopper sides, 7 gauge lonsills, 7 gauge auger trough ("CS" Carbon)
  2. 12 Gauge hopper sides, 10 gauge lonsills, 10 gauge auger trough ("SS" Carbon)
  3. Twin counter-rotating 7” diameter hard surfaced augers with three pitch settings for even unloading, two bolt self-aligning ball bearings at rear of auger
  4. Rear swing up spinner with 18" steel spinner disc
  5. Twin planetary drive system, protected at front of hopper
  6. Inverted V
  7. Galvanized top screens

BVDA-SERIES V-BOX SPREADERS OPTIONS

  • Poly light bar
  • 12 gauge stainless steel V-box construction (optional 10 gauge stainless)
  • Poly tanks
  • Hand crank winch for swing up spinner
  • Pre-wet systems
  • Leg stand kits
  • Lighting packages
  • Spill shields
  • Ladders
  • Doghouse cutout for dump body hoist
  • Mounting kits
  • Catwalks or fenders
  • Cabshield
  • Engine over hydraulic systems
  • 20" Poly spinner
  • Rear diverter chute
  • Rear planetary drive
  • Rear direct drive
  • Various spinner assemblies
  • Feed gate



BVDA - SERIES SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
BVDA-10-4810'48"84"5.62685 LBS
BVDA-10-5410'54"84"6.92780 LBS
BVDA-10-6010'60"84"8.32875 lbs
BVDA-11-4811'48"96"6.22825 LBS
BVDA-11-5411'54"96"7.62925 LBS
BVDA-11-6011'60"96"9.03025 LBS
BVDA-12-4812'48"96"6.82995 LBS
BVDA-12-5412'54"96"8.43100 LBS
BVDA-12-6012'60"96"9.93205 LBS
BVDA-13-4813'48"96" C.T.7.33135 LBS
BVDA-13-5413'54"96" C.T.9.03245 LBS
BVDA-13-6013'60"96" C.T.10.73355 LBS
BVDA-14-4814'48"108" C.T.7.93305 LBS
BVDA-14-5414'54"108"" C.T.9.73420 LBS
BVDA-14-6014'60"108"" C.T.11.63535 LBS
BVDA-15-4815'48"120" C.T.8.43445 LBS
BVDA-15-5415'54"120" C.T.10.33565 LBS
BVDA-15-6015'60"120" C.T.12.23685 LBS
BVDA-16-4816'48"132" C.T.8.93585 LBS
BVDA-16-5416'54"132" C.T.10.93705 LBS
BVDA-16-6016'60"132" C.T.13.03,825 LBS

The Bonnell “BVDA” Dual Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

The Bonnell “BVDA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

Optional equipment and upgrades also available. Call Bonnell today to order your BVDA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through
many winters to come.