UTILITY TAPERED PLOW SPECIFICATIONS
MODEL NUMBER | 9TA2742M4 | 10TA2643M4 | 9TA2742T4 | 10TA2643T4 |
---|---|---|---|---|
CUTTING EDGE LENGTH | 9'0" | 10'0" | 9'0" | 10'0" |
LEADING EDGE MOLDBOARD HEIGHT | 27" | 26" | 27" | 26" |
DISCHARGE END MOLDBOARD HEIGHT | 42' | 43' | 42' | 43' |
LEADING END OVERHANG | 12-1/2" | 12" | 12-1/2" | 12" |
DISCHARGE END OVERHANG | 19-1/2" | 20" | 19-1/2" | 20" |
CUTTING SWATH @ 30˚ | 7' 9-1/2" | 8'8" | 7' 9-1/2" | 8'8" |
APPROXIMATE WEIGHT OF BASE UNIT | 1050 LBS | 1100 LBS | 1250 LBS | 1300 LBS |
* longer lengths available upon request
Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)
Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs
Moldboard Pitch15˚off vertical
Reversing Table:3" x 2" x 1/4" Structural Tubinge
Lower Reinforcing Angle:4" x 4" x 1/2" Angle
Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing
A-Frame:3/8" Steel Plate
Reversing Cylinders:2" x 10" Single Acting
Reversing Limits (left and right):30 degrees
Plow to Table Hinge Points:(6) Spanning 69" 3/4" PINS
Pivot Pin:1" Grade Five Bolt
Cylinder Pins:1" C1045 Steel Pins
Number of Trip Springs:(6) .400 Wire Extension Trip
Lift Chain:5/16" Hi-Test Chain
Plow to Table Hinge Points:(6) Spanning 69" 3/4" PINS
Pivot Pin:1" Grade Five Bolt
Cylinder Pins:1" C1045 Steel Pins
Number of Trip Springs:(6) .400 Wire Extension Trip
Lift Chain:5/16" Hi-Test Chain
Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.
Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.