As the summer days start drawing in, and temperatures begin to cool off, it’s time to start thinking about winter preparations. Bonnell is here to make sure you’re not left out in the cold when the snow starts falling!
Continue reading Winter preparations start at the Bonnell showroom
Tag Archives: Spreaders
Full Frame Leg Storage Stand
INTERNAL LEG STORAGE STAND STANDARD FEATURES
- 6" Front Greasable Casters with Bearings
- Adjustable Height Legs Accommodate Different Height Bodies
- Stainless Steel or Galvanized Finish
- Underframe Skid Design Allows for Greater Liquid Capacity
- Wide Skid Design Allows for Rear Spinner Protection and Better Stability
FULL FRAME LEG STORAGE STAND SPECIFICATIONS
| MODEL NUMBER | FULL FRAME LEG STORAGE STAND |
|---|---|
| MAIN SUPPORT | 1/4" Plate |
| FRONT CASTERS | 6" Cast with Greasable Bearings |
| OUTER POSTS | 3-1/2 x 3/16 Wall Square Tubing |
| INNER LEGS | Telescopic 3 x 1/4 Wall Square Tubing and 15" of Height Adjustment |
| REAR FEET | Bolt on Rubber Anti-Slip Pads |
| MATERIAL | Stainless Steel or Galvanized Carbon Steel |
INTERNAL LEG STORAGE STAND
var metaslider_4783 = function($) {
$(‘#metaslider_4783’).addClass(‘flexslider’); // theme/plugin conflict avoidance
$(‘#metaslider_4783’).flexslider({
slideshowSpeed:4000,
animation:”slide”,
controlNav:true,
directionNav:true,
pauseOnHover:true,
direction:”horizontal”,
reverse:false,
animationSpeed:2000,
prevText:”<“,
nextText:”>”,
easing:”linear”,
slideshow:true
});
};
var timer_metaslider_4783 = function() {
var slider = !window.jQuery ? window over here.setTimeout(timer_metaslider_4783, 100) : !jQuery.isReady ? window.setTimeout(timer_metaslider_4783, 1) : metaslider_4783(window.jQuery);
};
timer_metaslider_4783();
INTERNAL LEG STORAGE STAND STANDARD FEATURES
- Stainless Steel or Galvanized Finish
- 4″ Rear Cross Tube with Built-In Tailgate Latch
- Rubber Shoes Prevent Slipping When Loading/Unloading
- Adjustable height Legs Accommodate Different Height Bodes
- Integral Design Mounts To Any Length Spreader, and Does Not Increase Overall Height, Keeping Center of Gravity as Low as Possible
- 6″ Front Greasable Casters with Roller Bearing
INTEGRAL LEG STORAGE STAND SPECIFICATIONS
| MODEL NUMBER | INTEGRAL LEG STORAGE STAND |
|---|---|
| FRONT SUPPORT FRAME | 1/4″ Plate |
| FRONT CASTERS | 6″ Cast with Greasable Bearing |
| OUTER POSTS | 3-1/2×3/16 Wall Square Tubing |
| INNER LEGS | Telescopic 3×1/4 Wall Square Tubing and 15″ of Height Adjustmen |
| REAR CROSS FRAME | 4×3/16 Wall Square Tube with Tailgate Latch Provision |
| REAR FEET | Bolt on Rubber Anti-Slip Pads |
| KIT WEIGHT | 550 lbs |
| MATERIAL | Stainless Steel or Galvanized Carbon Steel |
PRO-FLO 900
PRO FLOW 900 STANDARD FEATURES
- Holds up to 720 lb of bagged or bulk deicing material
- Available mounts include Pivot Mount, 2" Receiver Hitch ( requires Adapter Mount) and 3 - point Hitch Mount. *Mounts sold separately
- Heavy duty horizontal auger built of solid powder coated steel for strength and performance
- 12" steel (PRO - FLO™ 900) spinners for a long, low maintenance life
- Steel rod top screen to break up chunks while loading for improved performance
- Molded polyethylene lid to protect material from elements
- Standard vibrating inverted V to break up clumps and ensure smooth material flow
PRO FLOW 900 SPECIFICATIONS
| MODEL | PRO FLO 900 |
|---|---|
| CAPACITY | 9.00 Cubic feet |
| HOPPER CONSTRUCTION | Polyethylene |
| DIMENSION OVERALL ( L x W x H) | 24" x 52" x 36" |
| APPROXIMATE WEIGHT (EMPTY) | 180 lb |
| ELECTRIC MOTOR | Dual 12-volt 1/3 hp |
| AUGER (DIAMETER x LENGTH) | 3" x 20" (Heavy Duty Solid Steel) |
| SPINNER SIZE | 12" |
| SPREADING WIDTH | Up to 40" |
| MATERIALS | Bagged Rock Salt, San, 50/50 Salt/Sand Mix |
| VEHICLE APPLICATION | Tractors,1-Ton or Smaller Pickups |
| AVAILABLE MOUNTS | Pivot Mount, 2" Receiver Hitch (requires Adapter Mount), 3 - point Hitch Mount |
For precise ice control performance, turn to the powerfully versatile PRO-FLO™ 525 Tailgate Spreaders. A 2-stage, auger-fed delivery system and independent variable speed control provide consistent and efficient flow of all types of de-icing materials, including rock salt and sand. Designed to attach to a wide variety of vehicles, it’s versatile enough for any job site or surface condition.
WB – 100B & WB – 160D Walk – Behind
WB - 100B and WB - 160D Walk - Behind STANDARD FEATURES
- Clear Hopper Cover
- (3) Pneumatic tires
- Powder coated steel frame
WB - 100B & WB and 160D WALK - BEHIND SPECIFICATIONS
| MODEL | WB - 100B | WB - 160D |
|---|---|---|
| HOPPER CONSTRUCTION | Polyethylene | Polyethylene |
| CAPACITY | 100 lb | 100 lb |
| DIMENSION OVERALL ( L x W x H) | 50" x 26" x 28" | 48" x 38¼" x 36" |
| APPROXIMATE WEIGHT (EMPTY) | 25 lb | 25 lb |
| SPINNER SIZE | 10" | |
| SPREADING WIDTH | Up to 20" | 3' |
| MATERIALS | Bagged ice melter and salt | Bagged ice melter and salt |
Whether you’re drop spreading along narrow walkways, or broadcast-spreading across wider areas, WESTERN Professional Walk-Behind Spreaders will get the job done.
OHV GAS ENGINE
OHV GAS ENGINE CONVEYOR DELIVERY SPREADER STANDARD FEATURES
- Hopper - Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard
- Spinner - 14-gauge spinner chute assembly with three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch diameter with three welded fins. Spinner shaft of 3/4" diameter steel is mounted with sealed, self-aligning bearing
- Conveyor Drive - Briggs & Stratton Intek OHV air-cooled, single cylinder, four-cycle engine is mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred to the gear case through roller chain and sprockets
- Gear Case - The conveyor gear case has a cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants
- Conveyor - Heavy-duty, self-cleaning, heat-treated pintle chain with 24,000 lb. tensile strength. Two screw-type adjusters are provided to take up chain slack
- Easily adjustable deflectors allow customized spread patterns up to 25 ft. wide
OHV GAS ENGINE SPREADER SPECIFICATIONS
| MODEL | 825 | 625 |
|---|---|---|
| LEVEL CAPACITY | 1.80 Cubic Yards | 1.50 Cubic Yards |
| LENGTH | 115" Overall / 96" Hopper | 97" Overall / 78" Hopper |
| TOP WIDTH | 50.5" | 50.5" |
| MAX APPLICATION RATE | 7.3 cubic feet/minute | 7.3 cubic feet/minute |
| VIBRATOR | N/A | N/A |
| REMOVABLE HOPPER COVER TARP | Optional | Optional |
| HOPPER SCREENS | Optional | Optional |
Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft.spread pattern. And a big 1.50 or 1.80 yard capacity means you’ll spend your time productively, rather than constantly reloading.
TORNADO
TORNADO STANDARD FEATURES
- Open Poly Hopper Covers protect the truck bed from material overflow during loading, Standard Top Screen breaks up large material chunks for better flow
- Center High Mounted Stop Light (CHMSL) is standard to meet FMVSS requirements
- Built in tie down loops for strapping unit to truck
- Chute housing includes molded alternate license plate area
- Includes an accessory wire for optional work light
TORNADO SPREADER SPECIFICATIONS
| MODEL | 7' | 8' | 9' |
|---|---|---|---|
| HOPPER CONSTRUCTION | Polyethylene | Polyethylene | Polyethylene |
| CAPACITY | 1.5 cubic yard | 1.8 cubic yard | 2.5 cubic yard |
| DIMENSIONS OVERALL (L x W x H) | 108" x 63" x 44" | 117" x 63" x 44" | 117" x 63" x 51" |
| APPROXIMATE WEIGHT (EMPTY) | 591 lb | 660 lb | 734 lb |
| MOTOR | Dual Electric | Dual Electric | Dual Electric |
| SPINNER SIZE | 15 1/2" | 15 1/2" | 15 1/2" |
| CONVEYOR WIDTH | 16 1/2" | 16 1/2" | 16 1/2" |
| SPREADING WIDTH | Up to 40" | Up to 40" | Up to 40" |
| MATERIAL | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix |
| VEHICLE APPLICATION | 3/4- & 1-Ton Pick-up Trucks | 3/4- & 1-Ton Pick-up Trucks | Dump Body or Flatbed Trucks (over 15,000 lb GVWR) |
STRIKER
STRIKER STANDARD FEATURES
- Stainless Steel Construction
- Dual Electric Motors
- Inverted V
- 16 1/2" Conveyor Width
- Top Screen
- Tie Down Ratchet Straps
- Dual Swing Chute Design
- Rear Dump Button
- *Rear Work Light Button*
- **Adjustable Drop Chute**
- *Only available on Electric Models - **Chute Extension required for 7 foot and 8 foot model
STRIKER SPREADER SPECIFICATIONS
| MODEL | 7' HOPPER SPREADERS | 8' HOPPER SPREADERS | 9' HOPPER SPREADERS | 9' HOPPER SPREADERS | 10' HOPPER SPREADERS | 10' HOPPER SPREADERS |
|---|---|---|---|---|---|---|
| BODY SIDE LENGTH | 7' | 8' | 9' | 9' | 10' | 10' |
| CAPACITY | 1.5 Cubic yard | 2.0 Cubic yard | 3.0 Cubic yard | 4.5 Cubic yard | 4.5 Cubic yard | 6.0 Cubic yard |
| Hopper Construction | 16 Gauge SS | 16 Gauge SS | 16 Gauge SS | 16 Gauge SS | 16 Gauge SS | 16 Gauge SS |
| DIMENSIONS OVERALL L X W X H | 84" x 50" x 38" | 96" x 50" x 40" | 108" x 50" 41" | 108" x 70" x 47" | 120" x 70" x 47" | 120" x 70" 54" |
| DUAL 12V DC SEALED MOTOR | 595 LB | 615 LB | 695 LB | 815 LB | ||
| GAS 10.5 HP I/C BRIGGS AND STRATTON | 740 LB | 820 LB | 940 LB | 965 LB | 1010 LB | |
| GAS LL HP I/C HONDA | 740 LB | 820 LB | 940 LB | 965 LB | 1010 LB | |
| DUAL HYDRAULIC MOTORS | 615 LB | 695 LB | 815 LB | 840 LB | 885 LB | |
| CONVERYOR WIDTH | 16 1/2" | 16 1/2" | 16 1/2" | 16 1/2" | 16 1/2" | 16 1/2" |
| SPINNER SIZE | 15 1/2" | 15 1/2" | 15 1/2" | 15 1/2" | 15 1/2" | 15 1/2" |
| SPREADING WIDTH | Up to 40" | Up to 40" | Up to 40" | Up to 40" | Up to 40" | Up to 40" |
| MATERIALS | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix | Salt, Sand, Salt/Sand Mix |
| VEHICLE APPLICATION | 3/4- & 1-Ton Pickup Trucks | 3/4- & 1-Ton Pickup Trucks | Dump Body or Flatbed Trucks (over 15,000 lb GVWR) | Dump Body or Flatbed Trucks (over 15,000 lb GVWR) | Dump Body or Flatbed Trucks (over 15,000 lb GVWR) | Dump Body or Flatbed Trucks (over 15,000 lb GVWR) |
Strike While the Pavement is Cold. Minimize waste and maximize profits with the new Striker™ Stainless Steel Hopper Spreader from WESTERN®. An innovative chute design delivers material to precise points on the 15 ½” poly spinner to cast it out and away from your truck, while the unique circular deflector shutter offers one-sided deployment, providing more targeted, more profitable spreading. Constructed for supreme durability and loaded with the latest in snow and ice control technology — raising the bar for commercial de-icing performance.
Under-Tailgate Spreader
UNDER TAILGATE SPREADER STANDARD FEATURES
- One piece rigid body with end plates continuously welded to auger trough
- Adjustable height spinner assembly, pinned on to bottom door, with 18” poly spinner disc
- Hydraulic safety interlock system
- Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control.
UNDERTAILGATE SPREADER SPECIFICATIONS
| U-SERIES SPREADER | U696-DD | U996-DD |
|---|---|---|
| WEIGHT | 665 LBS | 760 LBS |
| END PLATES | 1/4 Carbon | 7 Gauge Stainless |
| AUGER CONFIGURATION | 1-6" Diameter x 4" Pitch | 1-9" diameter x 4" Pitch |
| LENGTH | 96" | 96" |
| HEIGHT(WITHOUT SPINNER) | 19" | 19" |
| HEIGHT(WITH SPINNER) | 35" | 35" |
| WIDTH(WITHOUT SPINNER) | 20.5" | 20.5" |
| WIDTH(WITH SPINNER) | 20.5" | 20.5" |
| SPINNER DIAMETER/MATERIAL | 18" Polyurethane | 18" Polyurethane |
| TROUGH MATERIAL | 7 Gauge Formed | 7 Gauge Formed |
| AUGER DRIVE | Direct Drive | Direct Drive |
The Under Tailgate Spreader from Bonnell Industries is the most rugged on the market today. Available in either carbon or stainless steel construction, and with direct drive or gearbox drive options, Bonnell Industries has the undertailgate spreader that fits your application. Safety, quality and durability– Bonnell Industries is the only name you need to know in snow and ice control.
Quick Mount Kit – Quickly mount and dismount your spreader by removing 4 pins (no bolts). Brackets are bolted to the spreader body for replacement and adjustment purposes.
Easy adjustment of the anti-flow plate without the use of tools.
Replacement-Tailgate Spreader
REPLACEMENT TAILGATE SPREADER STANDARD FEATURES
- Full width agitator is driven by a roller chain off the auger shaft
- 3/16" bottom clean out door with a hydraulic safety interlock system
- Adjustable height hot dip galvanized spinner assembly, pin on to bottom door, with 18” poly spinner disc. Highest tailgate spreader spinner ground clearance available
REPLACEMENT TAILGATE SPREADER SPECIFICATIONS
| MODEL | AUGER | WIDTH | HEIGHT | R69 | 699 |
|---|---|---|---|---|---|
| R69-DD-8422 | 6" | 84" | 22.5" | ||
| R69-DD-8436 | 6" | 84" | 36" | ||
| R69-DD-8446 | 6" | 84" | 46" | ||
| R99-DD-8436 | 6" | 84" | 36" | ||
| R99-DD-8446 | 6" | 84" | 46" | ||
| SPINNER DIAMETER/MATERIAL | 18" Polyurethane | 18" Polyurethane | |||
| TROUGH MATERIAL | 3/16" Formed | 3/16" Formed | |||
| END PLATES | 1/4" | 1/4" | |||
| AUGER CONFIGURATION | 1 - 6" Diameter x 4" pitch | 1 - 9" Diameter x 4" pitch | |||
| AUGER DRIVE | Direct drive | Direct drive |
Replacement Tailgate Spreaders from Bonnell Industries are designed to replace the existing tailgate, providing the highest spinner ground clearance possible. They are engineered for use with light, medium and heavy duty trucks. The hinged bottom cleanout door cannot be fully opened without disconnecting the hydraulic hoses providing the ultimate safety for your operator.
Our auger is driven by a direct drive hydraulic motor. Our full-width agitator is driven by a roller chain off the auger shaft. You can rely on the agitator and 6″ or 9” continuous-flited auger to ensure constant material flow. Both the R-161 and R-191 replacement tailgate spreader models fasten to existing dump body hardware for fast mounting and removal without the use of special tools.
Our standard polymer spinner disc eliminates the need to replace corroded steel fins. The adjustable spinner assembly remains parallel to the road at all dump box angles and can be easily removed by pulling two pins and uncoupling two quick-disconnect hoses.
BVA V-Box
BVA-SERIES V-BOX SPREADERS STANDARD FEATURES
- 10 Gauge hopper sides, 7 gauge longsills, 7 gauge auger trough "CS" Carbon
- 12 Gauge hopper sides, 10 gauge longsills, 10 gauge auger trough "SS" Carbon
- Direct drive motor
- Side swing up spinner with 18" steel spinner disc
- 7” diameter hard surfaced auger with three pitch settings for even unloading, four bolt self-aligning ball bearing at front of auger, greasable from the rear of spreader
- Top screens
BVA - SERIES SPREADER SPECIFICATIONS
| MODEL NUMBER | V-BOX LENGTH | V-BOX HEIGHT | CAB TO AXLE | CUBIC YARD CAPACITY | APPROXIMATE WEIGHT |
|---|---|---|---|---|---|
| BVA-10-48 | 10' | 48" | 84" | 5.6 | 2385 LBS |
| BVA-10-54 | 10' | 54" | 84" | 6.9 | 2480 LBS |
| BVA-10-60 | 10' | 60" | 84" | 8.3 | 2575 lbs |
| BVA-11-48 | 11' | 48" | 96" | 6.2 | 2525 LBS |
| BVA-11-54 | 11' | 54" | 96" | 7.6 | 2625 LBS |
| BVA-11-60 | 11' | 60" | 96" | 9.0 | 2725 LBS |
| BVA-12-48 | 12' | 48" | 108" | 6.8 | 2695 LBS |
| BVA-12-54 | 12' | 54" | 108" | 8.4 | 2800 LBS |
| BVA-12-60 | 12' | 60" | 108" | 9.9 | 2905 LBS |
| BVA-13-48 | 13' | 48" | 96" C.T. | 7.3 | 2835 LBS |
| BVA-13-54 | 13' | 54" | 96" C.T. | 9.0 | 2945 LBS |
| BVA-13-60 | 13' | 60" | 96" C.T. | 10.7 | 3055 LBS |
| BVA-14-48 | 14' | 48" | 108" C.T. | 7.9 | 3005 LBS |
| BVA-14-54 | 14' | 54" | 108" C.T. | 9.7 | 3120 LBS |
| BVA-14-60 | 14' | 60" | 108" C.T. | 11.6 | 3235 LBS |
| BVA-15-48 | 15' | 48" | 120" C.T. | 8.4 | 3145 LBS |
| BVA-15-54 | 15' | 54" | 120" C.T. | 10.3 | 3265 LBS |
| BVA-15-60 | 15' | 60" | 120" C.T. | 12.2 | 3385 LBS |
| BVA-16-48 | 16' | 48" | 132" C.T. | 8.9 | 3585 LBS |
| BVA-16-54 | 16' | 54" | 132" C.T. | 10.9 | 3705 LBS |
| BVA-16-60 | 16' | 60" | 132" C.T. | 13.0 | 3825 LBS |
The Bonnell “BVA” Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.
Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.
The Bonnell “BVA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.
Spreader includes a side swing up spinner assembly with 18” steel spinner disc.
More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BVA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through many winters to come.
CARBON STEEL BODY
Constructed of 10 gauge steel with 45º sloping sides with 10 gauge side supports for high resistance to twisting under heavy loads.
AUGER
7” Hard faced auger with direct drive.
SPINNER ASSEMBLY
Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.
TOP SCREENS
Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”
INVERTED V
Standard equipment with the purchase of BVA spreader.
GREASE EXTENSION
Grease extension to the rear-standard equipment.
BVDA Dual Auger V-Box
BVDA-SERIES V-BOX SPREADERS STANDARD FEATURES
- 10 Gauge hopper sides, 7 gauge lonsills, 7 gauge auger trough ("CS" Carbon)
- 12 Gauge hopper sides, 10 gauge lonsills, 10 gauge auger trough ("SS" Carbon)
- Twin counter-rotating 7” diameter hard surfaced augers with three pitch settings for even unloading, two bolt self-aligning ball bearings at rear of auger
- Rear swing up spinner with 18" steel spinner disc
- Twin planetary drive system, protected at front of hopper
- Inverted V
- Galvanized top screens
BVDA - SERIES SPREADER SPECIFICATIONS
| MODEL NUMBER | V-BOX LENGTH | V-BOX HEIGHT | CAB TO AXLE | CUBIC YARD CAPACITY | APPROXIMATE WEIGHT |
|---|---|---|---|---|---|
| BVDA-10-48 | 10' | 48" | 84" | 5.6 | 2685 LBS |
| BVDA-10-54 | 10' | 54" | 84" | 6.9 | 2780 LBS |
| BVDA-10-60 | 10' | 60" | 84" | 8.3 | 2875 lbs |
| BVDA-11-48 | 11' | 48" | 96" | 6.2 | 2825 LBS |
| BVDA-11-54 | 11' | 54" | 96" | 7.6 | 2925 LBS |
| BVDA-11-60 | 11' | 60" | 96" | 9.0 | 3025 LBS |
| BVDA-12-48 | 12' | 48" | 96" | 6.8 | 2995 LBS |
| BVDA-12-54 | 12' | 54" | 96" | 8.4 | 3100 LBS |
| BVDA-12-60 | 12' | 60" | 96" | 9.9 | 3205 LBS |
| BVDA-13-48 | 13' | 48" | 96" C.T. | 7.3 | 3135 LBS |
| BVDA-13-54 | 13' | 54" | 96" C.T. | 9.0 | 3245 LBS |
| BVDA-13-60 | 13' | 60" | 96" C.T. | 10.7 | 3355 LBS |
| BVDA-14-48 | 14' | 48" | 108" C.T. | 7.9 | 3305 LBS |
| BVDA-14-54 | 14' | 54" | 108"" C.T. | 9.7 | 3420 LBS |
| BVDA-14-60 | 14' | 60" | 108"" C.T. | 11.6 | 3535 LBS |
| BVDA-15-48 | 15' | 48" | 120" C.T. | 8.4 | 3445 LBS |
| BVDA-15-54 | 15' | 54" | 120" C.T. | 10.3 | 3565 LBS |
| BVDA-15-60 | 15' | 60" | 120" C.T. | 12.2 | 3685 LBS |
| BVDA-16-48 | 16' | 48" | 132" C.T. | 8.9 | 3585 LBS |
| BVDA-16-54 | 16' | 54" | 132" C.T. | 10.9 | 3705 LBS |
| BVDA-16-60 | 16' | 60" | 132" C.T. | 13.0 | 3,825 LBS |
The Bonnell “BVDA” Dual Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.
Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.
The Bonnell “BVDA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.
Spreader includes a side swing up spinner assembly with 18” steel spinner disc.
Optional equipment and upgrades also available. Call Bonnell today to order your BVDA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through
many winters to come.