Tag Archives: Snow Plows

Level Raise System

 

pdf-button

  • icon
  • icon

Level Raise System STANDARD FEATURES

  1. Can be set in any of 3 sets of holes enabling different degrees of leveling capability, increasing the workability with different types of hitch/lift arm combinations
  2. High Country Series
  3. Metropolitan Series
  4. Utility Series
  5. By shifting the positions of the chain hookup points on the plow using the Level Raise Lift System™, the table pin-up points and moldboard cutting edge remain parallel to the ground.(Top to Bottom Reversed to Right, Bulldoze, and Reversed to Left)

Tapered Utility Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

UTILITY TAPERED PLOW STANDARD FEATURES

  1. 3/8" Formed plate a-frame
  2. 3" x 3" x 1/4" tube front push frame
  3. (2) Single acting 2" x 10" reversing cylinders
  4. 1" Thick swivel skid shoes
  5. (6) Table to moldboard hook-up points with 3/4" pins
  6. 15" Extended overhang
  7. (8) 3/8" Ribs

UTILITY TAPERED PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1" pins @ 23.5”,standard))
  • Custom Application

    Running Gear Options

  • Even Wear Shoes

    Moldboard Options

  • ¾” Bottom Angle
  • Curb Cut (Mailbox Cut)
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available



UTILITY TAPERED PLOW SPECIFICATIONS

MODEL NUMBER9TA2742M410TA2643M49TA2742T410TA2643T4
CUTTING EDGE LENGTH9'0"10'0"9'0"10'0"
LEADING EDGE MOLDBOARD HEIGHT27"26"27"26"
DISCHARGE END MOLDBOARD HEIGHT42'43'42'43'
LEADING END OVERHANG12-1/2"12"12-1/2"12"
DISCHARGE END OVERHANG19-1/2"20"19-1/2"20"
CUTTING SWATH @ 30˚7' 9-1/2"8'8"7' 9-1/2"8'8"
APPROXIMATE WEIGHT OF BASE UNIT1050 LBS1100 LBS1250 LBS1300 LBS

* longer lengths available upon request



Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)


Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs


Moldboard Pitch15˚off vertical


Reversing Table:3" x 2" x 1/4" Structural Tubinge


Lower Reinforcing Angle:4" x 4" x 1/2" Angle


Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing


A-Frame:3/8" Steel Plate


Reversing Cylinders:2" x 10" Single Acting


Reversing Limits (left and right):30 degrees


Plow to Table Hinge Points:(6) Spanning 69" 3/4" PINS


Pivot Pin:1" Grade Five Bolt


Cylinder Pins:1" C1045 Steel Pins


Number of Trip Springs:(6) .400 Wire Extension Trip


Lift Chain:5/16" Hi-Test Chain


Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.

Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.

Metropolitan Torsion Trip Edge

 

pdf-button

  • icon
  • icon
  • icon

METROPOLITAN TORSION TRIP EDGE PLOW STANDARD FEATURES

  1. (2) Adjustable Pitch Setting
  2. 4"X 4" x 3/8" tube push frame spanning 90"
  3. (2) 1" X 2-1/2" trip connecting post fastened by 1-1/4" Bolts
  4. (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
  5. (4) 3/4" Square spring wire torsion - trip springs - independently replaceable, 7/8 optional
  6. Extended moldboard continuously welded

METROPOLITAN TORSION TRIP EDGE PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Husting Style
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels
  • 5.70 x 8.0 Pneumatic Tires*
  • Foam-Filled Rubber Tires*
    *Should not be used with Cable Wrap Lift Assemblies

    Moldboard Options

  • ¾” Bottom Angle
  • 7-Gauge Steel Construction
  • Curb Cut (Mailbox Cut)
  • Extra Ribs
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Compression Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push Frame
  • Manual Reverse

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available



METROPOLITAN TORSION TRIP EDGE SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
10ST36TT710'0"36"8'2"1765 LBS4
11ST36TT711'0"36"9'0"1815 LBS4
12ST36TT712'0"36"9'10"1885 LBS4
10ST42TT710'0"42"8'2"1865 LBS4
11ST42TT711'0"42"9'0"1915 LBS4
12ST42TT712'0"42"9'10"1985 LBS4
10ST49TT710'0"49"8'2"1905 LBS4
11ST49TT711'0"49"9'0"1975 LBS4
12ST49TT712'0"49"9'10"2045 LBS4

* longer lengths available upon request



Moldboard Thickness:10 Gauge


Moldboard Reinforcing:(7)-1/2” x 3” Ribs


Adjustable Moldboard Pitch Setting25˚, 15˚ or 5˚ off vertical


Lower Reinforcing Angle:7" x 4" x 1/2" Fully Boxed with 3/8" x 6-3/4" Plate


Reversing Frame:5' x 3-1/2" x 1/2" Angle Iron Sector


Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting


Reversing Limits (left and right):0 to 35 degrees with Positive Stops


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel


Pivot Pin:1-1/4" Grade 8 Bolt


Cylinder Pins:1" C1045 Steel Pins


Metropolitan TZ Zero Insertion Force

 

pdf-button

  • icon
  • icon
  • icon

METROPOLITAN TZ ZERO INSERTION FORCE PLOW STANDARD FEATURES

  1. (2) Adjustable Pitch Setting
  2. 4"X 4" x 3/8" tube push frame spanning 90"
  3. (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
  4. (5) 3/4" Square spring wire torsion - trip springs - independently replaceable
  5. Extended moldboard continuously welded (steel moldboards)
  6. Screw adjustable spring tension

METROPOLITAN TZ ZERO INSERTION PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Husting Style
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels
  • 5.70 x 8.0 Pneumatic Tires*
  • Foam-Filled Rubber Tires*
    *Should not be used with Cable Wrap Lift Assemblies

    Moldboard Options

  • ¾” Bottom Angle
  • 7-Gauge Steel Construction
  • Curb Cut (Mailbox Cut)
  • Extra Ribs
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Compression Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push Frame
  • Manual Reverse

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available
img



METROPOLITAN TZ ZERO INSERTION FORCE PLOW SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
10ST36TZ710'0"36"8'2"1965 LBS5
11ST36TZ711'0"36"9'0"2015 LBS6
12ST36TZ712'0"36"9'10"2085 LBS6
10ST42TZ710'0"42"8'2"2065 LBS6
11ST42TZ711'0"42"9'0"2115 LBS6
12ST42TZ712'0"42"9'10"2185 LBS6
10ST49TZ710'0"49"8'2"2105 LBS5
11ST49TZ711'0"49"9'0"2175 LBS6
12ST49TZ712'0"49"9'10"2245 LBS6

* longer lengths available upon request



Moldboard Thickness:10 Gauge


Moldboard Reinforcing:(8)-1/2” x 3” Ribs


Adjustable Moldboard Pitch Setting15˚ or 5˚ off vertical


Spring Wire Size:3/4" square


Lower Reinforcing Angle:4" x 4" x 1/2


Trip Angle:4" x 4" x 1/2" reinforced fully boxed


Trip Pin Diameter:1-1/4", independently replaceable


Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting


Reversing Limits (left and right):0 to 35 degrees with Positive Stops


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


Pivot Pin:1-1/4" Grade 8 Bolt


Cylinder Pins:1" C1045 Steel Pins


Metropolitan Expressway

 

pdf-button

  • icon
  • icon
  • icon

METROPOLITAN EXPRESSWAY PLOW STANDARD FEATURES

  1. (3) Adjustable Pitch Setting
  2. (2) Compression trip bars, with 3" rubber bushings top & bottom for return trip cushion
  3. (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
  4. 7" x 4" x 1/2" fully boxed bottom angle
  5. Extended moldboard continuously welded

METROPOLITAN EXPRESSWAY PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Husting Style
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels
  • 5.70 x 8.0 Pneumatic Tires*
  • Foam-Filled Rubber Tires*
    *Should not be used with Cable Wrap Lift Assemblies

    Moldboard Options

  • ¾” Bottom Angle
  • 7-Gauge Steel Construction
  • Curb Cut (Mailbox Cut)
  • Extra Ribs
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Compression Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push Frame
  • Manual Reverse

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available
img



METROPOLITAN EXPRESSWAY PLOW SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTAPPROXIMATE WEIGHTCUTTING SWATH @ 35˚CUTTING NUMBER EDGE LENGTHCENTER HEIGHTEND HEIGHTNUMBER OF SPRINGS
10EW3648MC713'8"36"2005 LBS8'2"10'0"36"48"2
11EW3649MC714'8"36"2082 LBS9'0"11'0"36"49"2
12EW3650MC715'8"36"2169 LBS9'10"12'0"36"50"2
10EW4052MC713'8"42"2075 LBS8'2"10'0"40"52"2
11EW4053MC714'8"42"2155 LBS9'0"2209 LBS40"53"2
12EW4053MC715'8"42"2244 LBS9'10"2276 LBS40"54"2
10EP4760MC713'8"49"2195 LBS8'2"2190 LBS47"60"2
11EW4761MC714'8"49"2273 LBS9'0"2260 LBS47"61"2
12EW4762MC715'8"49"2367 LBS9'10"2330 LBS47"62"2

* longer lengths available upon request



Moldboard Thickness:10 Gauge


Moldboard Reinforcing:(7)-1/2” x 3” Ribs


Adjustable Moldboard Pitch Setting25˚, 15˚ or 5˚ off vertical


Lower Reinforcing Angle:7" x 4" x 1/2" Fully Boxed with 3/8" x 6-3/4" Plate


Reversing Frame:5' x 3-1/2" x 1/2" Angle Iron Sector


Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting


Reversing Limits (left and right):0 to 35 degrees with Positive Stops


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel


Pivot Pin:1-1/4" Grade 8 Bolt


Cylinder Pins:1" C1045 Steel Pins


 

700 SERIES FULL TRIP PLOW

 

pdf-button

  • icon
  • icon

HINICKER 700 SERIES FULL TRIP PLOW STANDARD FEATURES

  1. Hydraulic scissors lift cuts transport bounce eliminates lift chain
  2. 6 vertical and 2 diagonal ribs provide strength and support
  3. Fully hydraulic lift and angling system
  4. 3/8" x 6" high carbon steel replaceable cutting edge
  5. Low maintenance poly moldboard surface reduces friction never needs painting. Optional rubber or polyethylene snow deflectors
  6. Fully moldboard trip system helps protect plow and truck


700 SERIES FULL TRIP PLOW SPECIFICATIONS

MODEL702752
BLADE WIDTH7' (76" at full angle)7-1/2' (82' at full angle)
BLADE HEIGHT26"26"
MOLDBOARD SURFACE1/4" HMW Black Polyethylene1/4" HMW Black Polyethylene
CUTTING EDGE3/8" x 6" x 84"3/8" x 6" x 92"
WEIGHT (NET OF TRUCK MOUNTED BRACKETS AND WIRING)449 lb removable460 lb removable

 

 

BAT WING EXTENSIONS

 

pdf-button

  • icon
  • icon

BAT WING SNOW PLOW STANDARD FEATURES

  1. Fold back wings for easy road transport
  2. Easy pin removal to convert to conventional plow
  3. Up to 18


BAT WING PLOW SPECIFICATIONS

BASE PLOWEXTENSION WIDTHTOTAL WIDTH
10'24"14"
11"24" - 30"15' - 16'
12'24" - 36"16' - 18'

* Not available with ALL PLOWS


Call factory with your needs for a complete design consultation


POLAR FLEX BLADES

 

pdf-button

  • icon
  • icon

POLAR FLEX BLADES STANDARD FEATURES

  1. CLASSIC MOUNT SERIES I - Heavy duty, one piece welded construction with a robust and rigid design
  2. FRONT MOUNT SERIES II - Less weight/lower height, easier segment changes, ideal for reversible plows and wings
  3. DIRECT MOUNT SERIES III - Doesn’t raise the moldboard height, and keeps the cost down on replacement parts because the mounting is built into the plow
  4. CLASSIC (SERIES I) - Flex elements and wear segments can be easily separated for environmentally safe recycling, a unique Polar FlexTM feature. Custom size configurations available on request, nose pieces & various styles of curb runners are available for both configurations Heat treated parts are warranted against breakage throughout the usable life of the part
  5. FRONT MOUNT (SERIES II) and DIRECT MOUNT (SERIES III) - Individual 12 inch carbide tipped steel segments are mounted using a patented system of reusable synthetic rubber flexible elements. This mounting technique significantly reduces vibration while simultaneously allowing the cutting edge to conform to the surface of the road. These two capabilities allow the system to clean the road better (less salt, fewer trips, safer roads) and reduce chatter (longer blade life, less plow maintenance, reduced operator fatigue)
  6. 7" x 4" x 1/2" Fully Boxed Bottom Angle


SPECIFICATIONS

MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHLEADING END HEIGHTDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGSCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
OF BASE UNIT
10TA2848MX110'0"11'28"
48"14"68'2"2069 lbs.
11TA2749MX111'0"
12'
27"
49"15"69'0"2136 lbs.
12TA2650MX112'0"13'
26"
50"16"69'9"2123 lbs.
10TA3252MX110'0"12'
32"52"16"68'2"2109 lbs.
11TA3153MX111'0"13'
31"53"17"69'0"2179 lbs.
12TA3054MX112'0"14'
30"54"19"69'9"2258 lbs.
14TA3861MX110'0"12'
39"60"18"68'2"2192 lbs.
11TA3861MX111'0"13'
38"61"19"69'0"2267 lbs.
12TA3762MX112'0"14'
37"62"20"69'9"2351 lbs.
12TA272MX112'0"14'
42"72"20"69'9"2351 lbs.

* longer lengths available upon request



Moldboard Thickness: 10 Gauge


Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


Lower Reinforcing Angle: 7" x 4" x 1/2"


Reversing Frame: 5" x 3/8" Wall Front Push Tube


Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


Reversing Limits (left & right): 0 to 35 degrees


Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


Pivot Pin: 1 - 1/2" Grade 8 Bolt


Cylinder Pins: 1 - 1/4" C1045 Steel Pins


Push N Plows

 

pdf-button

  • icon
  • icon
  • icon

PUSH N PLOW STANDARD FEATURES

  1. MODEL LDP 3" Schedule 40 pip continuously welded to 1-1/4" steel plates and reinforced with 3/8" plate gussets.
  2. MODEL BHP 2-1/2" Scheduled 40 pipe continuously welded to 1" steel plates and reinforced with 3/8" plate gussets.
  3. MODEL SSP Designed to fit current models with quick attach system
  4. LDP-5100-14-FB with CAT® Fusion™ Coupler

PUSH N PLOWOPTIONS

  • Chain binder kit
  • Torsion trip cutting edge
  • Quick couplers of your choice



PUSH N' PLOW SPECIFICATION

SPECIFICATIONLDPBHPSSP
HEIGHT48"36"36"
LENGTHS AVAILABLE10' to 30'10' to 14'6' to 12'
CAPACITY12 to 38 yard9 to 13 yard5 to 11 yard
MOLDBOARD CONSTRUCTIONContinuously Welded 3/16" Double-PaneledContinuously Welded 3/16" Double-PaneledContinuously Welded 3/16" Double-Paneled
MOLDBOARD TO END PLATE Two - 2-1/2"Two - 2"Two - 2"
REINFORCEMENT, PER SIDESchedule 40 PipeSchedule 40 PipeSchedule 40 Pipe
ENDPLATE CONSTRUCTION3/8" Endplates3/8" Endplates3/8" End
CUTTING EDGE1-1/2" x 10" Adjustable Rubber, Punched to AASHTO Standard1-1/2" x 10" Adjustable Rubber, Punched to AASHTO Standard1-1/2" x 10" Adjustable Rubber, Punched to AASHTO Standard
WEAR SHOE MATERIAL1-1/4" x 4" AR400 Steel1" x 4" AR400 Steel1" x 4" AR400 Steel
WEAR SHOE TYPEBolt on Reversible/ReplaceableBolt on Reversible/ReplaceableBolt on Reversible/Replaceable
LIFTING EYESYesYesYes
FINISHImplement YellowImplement YellowImplement Yellow

The Bonnell Push N Plow™ is specifically designed to eliminate spillover and windrows, allowing you to finish your snow removal job faster and more efficiently. Get more jobs done in less time to make your operation more profitable. So put profit in your pocket, place the snow where you want it. With sizes ranging from six to thirty feet, we have a Push N Plow™ to fit your application.  Whether it’s tight and confined spaces, or out on the open runway, the Push N Plow™ will stand up to the legendary quality you’ve come to expect from Bonnell.

Straight Utility Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

UTILITY STRAIGHT PLOW STANDARD FEATURES

  1. 3/8" Formed plate a-frame
  2. 3" x 3" x 1/4" tube front push frame
  3. (2) Single acting 2" x 10" reversing cylinders
  4. 1" Thick swivel skid shoes
  5. (6) Table to moldboard hook-up points with 3/4" pins
  6. 15" Extended overhang
  7. (8) 3/8" Ribs

UTILITY STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1" pins @ 23.5”,standard))
  • Custom Application

    Running Gear Options

  • Even Wear Shoes

    Moldboard Options

  • ¾” Bottom Angle
  • Curb Cut (Mailbox Cut)
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available



UTILITY STRAIGHT PLOW SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTTRIP MECHANISMCUTTING SWATH @ 35˚MOLD-BOARD TYPEAPPROXIMATE WEIGHT OF BASE UNIT
9ST31M49'0"31"MOLDBOARD7' 9-1/2"STEEL975 LBS
10ST31M410'0"31"MOLDBOARD8'8'STEEL1025 LBS
9SP31M49'0"31"MOLDBOARD7' 9-1/2"POLY975 LBS
10SP31M410'0"31"MOLDBOARD8'8"POLY1025 LBS
9ST31T49'0"31"TRIP-EDGE7' 9-1/2"STEEL1175 LBS
10ST31T410'0"31"TRIP-EDGE8'8"STEEL1225 LBS
9SP31T49'0"31"TRIP-EDGE7' 9-1/2"POLY1175 LBS
10SP31T410'0"31"TRIP-EDGE8'8"POLY1225 LBS

* longer lengths available upon request



Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)


Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs


Moldboard Pitch15˚off vertical


Reversing Table:3" x 2" x 1/4" Structural Tubinge


Lower Reinforcing Angle:4" x 4" x 1/2" Angle


Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing


A-Frame:3/8" Steel Plate


Reversing Cylinders:2" x 10" Single Acting


Reversing Limits (left and right):30 degrees


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


Pivot Pin:1" Grade Five Bolt


Cylinder Pins:1" C1045 Steel Pins


Plow to Table Hinge Points:(6) Spanning 69", 3/4" Pins


Number of Trip Springs:(6) .400 Wire Extension Trip


Lift Chain:5/16" Hi-Test Chain


Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.

Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.

Mid Weight Straight Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

MIDWEIGHT STRAIGHT PLOW STANDARD FEATURES

  1. (4) Adjustable Pitch Setting
  2. (2) Compression trip springs mounted on the trip bars
  3. 3/8" Formed plate push assembly
  4. (2) Single acting 3" x 10" reversing cylinders
  5. (4) Table to moldboard hook-up points with 3/4" bearing surface and 1-1/4" pins
  6. 4" X 4" x 3/8" fully boxed bottom angle

MIDWEIGHT STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels

    Moldboard Options

  • Curb Cut (Mailbox Cut)
  • 1/2" Ribs

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available



    MIDWEIGHT STRAIGHT SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
    9ST36M89'0"36"7'5"1400 LBS2
    10ST36M810'0"36"8'2"1450 LBS2
    11ST36M811'0"36"9'0"1500 LBS2
    12ST36M812'0"36"9'10"1550 LBS2
    9ST42M89'0"42"7'5"1525 LBS2
    10ST42M810'0"42"8'2"
    1580 LBS2
    11ST42M811'0"42"9'0"1635 LBS2
    12ST42M812'0"42"9'10"1690 LBS2

    * longer lengths available upon request



    Moldboard Thickness:10 Gauge


    Moldboard Reinforcing:(6) - 3/8" thick steel ribs x 4" @ bottom, 2" @ top


    Adjustable Moldboard Pitch Setting:10˚, 15˚, 20˚, 25˚ off vertical


    Lower Reinforcing Angle:4" x 4" x 3/8"


    Reversing Frame:3-1/2" x 3-1/2" x 3/8" A36 Plate


    Diameter of Hinge Pins:1-1/4"


    Reversing Cylinders:Chrome 3" Bore x 16" Stroke (3" Rod) Single Acting


    Reversing Limits (left and right):0 to 35 degrees with Positive Stops


    Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


    Pivot Pin:1-1/4" Grade 8 Bolt


    Plow Table Hinge Points:(4) Spanning 86"


    Cylinder Pins:1" C1045 Steel Pins


    ***Call factory for complete specifications and optional equipment not listed. Weights do not include optional equipment.***


    The Bonnell Mid Weight Straight Moldboard Snow Plow is specifically designed to efficiently remove snow in and around obstructions often found in urban areas. All models feature a moldboard adjustable in pitch to four different angle settings.

    Proper moldboard position is assured through the use of two rugged compression springs which retain their integrity longer than ordinary extension springs. This plow is light in weight with strength where you need it. With our wide range of available options, you can tailor the Mid Weight plow to fit your exact needs.

    Metropolitan Straight Snow Plow


    pdf-button
    • icon
    • icon
    • icon

    METROPOLITAN STRAIGHT PLOW STANDARD FEATURES

    1. (3) Adjustable Pitch Setting
    2. 4"X 4" x 3/8" tube push frame spanning 90"
    3. (2) Compression trip bars, with 3" rubber bushings top & bottom for return trip cushion
    4. (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
    5. 7" x 4" x 1/2" fully boxed bottom angle
    6. Extended moldboard continuously welded

    METROPOLITAN STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push Frame
    • Manual Reverse

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    METROPOLITAN STRAIGHT PLOW SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
    10ST36MC710'0"36"8'2"2050 LBS2
    11ST36MC711'0"36"9'0"2115 LBS2
    12ST36MC712'0"36"9'10"2180 LBS2
    10ST42MC710'0"42"8'2"2142 LBS2
    11ST42MC711'0"42"9'0"2209 LBS2
    12STM2MC712'0"42"9'10"2276 LBS2
    10ST49MC710'0"49"8'2"2190 LBS2
    11ST49MC711'0"49"9'0"2260 LBS2
    12ST49MC712'0"49"9'10"2330 LBS2

    * longer lengths available upon request



    Moldboard Thickness:10 Gauge


    Moldboard Reinforcing:(7)-1/2” x 3” Ribs


    Adjustable Moldboard Pitch Setting25˚, 15˚ or 5˚ off vertical


    Lower Reinforcing Angle:7" x 4" x 1/2" Fully Boxed with 3/8" x 6-3/4" Plate


    Reversing Frame:5' x 3-1/2" x 1/2" Angle Iron Sector


    Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting


    Reversing Limits (left and right):0 to 35 degrees with Positive Stops


    Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


    Cutting Edge:5/8" x 6" High Carbon Steel


    The Bonnell Metropolitan Straight Moldboard Snowplow in either steel or polyethylene is specifically designed to efficiently remove snow in and around obstructions often found in urban areas.

    All models feature a moldboard adjustable in pitch to three different angle settings. Proper moldboard position is assured through the use of two rugged compression springs which retain their integrity longer than ordinary extension springs. This plow is light in weight yet rugged in design, with strength where you need it.

    The moldboard has a built-in extended rolled top which provides a continuation of the curve, deflecting the snow down and away, greatly improving vision which results in better maintenance and greater safety. With our wide range of available options, you can tailor the Metropolitan plow to fit your exact needs.

    HIGH COUNTRY STRAIGHT

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY STRAIGHT PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available



    HIGH COUNTRY STRAIGHT SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    NUMBER OF SPRINGS
    10ST36MX110'0"36"8'2"1960 lbs.4
    11ST36MX111'0"36"9'0"2025 lbs.4
    12ST36MX112'0"36"9'10"2090 lbs.4
    10ST42MX110'0"
    42"8'2"2052 lbs.6
    11ST42MX111'0"42"9'0"2119 lbs.6
    12ST42MX112'0"42"9'10"2186 lbs.6
    10ST49MX110'0"49"8'2"2100 lbs.6
    11ST49MX111'0"49"9'0"2170 lbs.6
    12ST49MX112'0"49"9'10"2240 lbs.6
    11ST60MX111'0"60"9'0"2600 lbs.8
    12ST60MX112'0"60"9'10"2600 lbs.8

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    Bonnell High Country Straight Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow. Bonnell’s many standard features are what set us apart from our competition.
    The poly bushing provides cushion, making hitting an obstruction less intense and safer. All High Country Plows include an automatic safety feature which allows the moldboard to trip forward when the blade encounters an obstruction. After the obstruction is cleared, heavy-duty extension springs return the moldboard to its plowing position. This minimizes damage to the streets, plow, truck and driver.

    HIGH COUNTRY TAPERED

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY TAPERED PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHLEADING END HEIGHTDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGSCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    10TA2848MX110'0"11'28"
    48"14"68'2"2069 lbs.
    11TA2749MX111'0"
    12'
    27"
    49"15"69'0"2136 lbs.
    12TA2650MX112'0"13'
    26"
    50"16"69'9"2123 lbs.
    10TA3252MX110'0"12'
    32"52"16"68'2"2109 lbs.
    11TA3153MX111'0"13'
    31"53"17"69'0"2179 lbs.
    12TA3054MX112'0"14'
    30"54"19"69'9"2258 lbs.
    14TA3861MX110'0"12'
    39"60"18"68'2"2192 lbs.
    11TA3861MX111'0"13'
    38"61"19"69'0"2267 lbs.
    12TA3762MX112'0"14'
    37"62"20"69'9"2351 lbs.
    12TA272MX112'0"14'
    42"72"20"69'9"2351 lbs.

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    Bonnell High Country Tapered Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow. This plow produces the same results when plowing to the left or to the right.

    Bonnell’s many standard features are what set us apart from our competition. These features, outlined above, include the 7” x 4” x 1/2” fully boxed bottom angle which adds strength to keep the moldboard from bending. We also insert a 3” x 3” poly bushing into the top and bottom of both trip bars to absorb shock from tripping. The poly bushing provides cushion, making hitting an obstruction less intense and safer on the driver, plow, truck and the road.

    All High Country Plows include an automatic safety feature which allows the moldboard to trip forward when the blade encounters an obstruction. After the obstruction is cleared, heavy-duty extension springs return the moldboard to its plowing position. This minimizes damage to the streets, plow, truck and driver.

    HIGH COUNTRY EXPRESSWAY

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY EXPRESSWAY PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    HIGH COUNTRY EXPRESSWAY SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    10EW3648MX110'0"13'8"48"14"68'2"2290 lbs.
    11EW3649MX111'0"14'8"49"15"69'0"2367 lbs.
    12EW3650MX112'0"15'8"50"16"69'9"2454 lbs.
    10EW4052MX110'0"
    13'8"52"16"68'2"2360 lbs.
    11EW4053MX111'0"14'8"53"17"69'0"2440 lbs.
    12EW4054MX112'0"15'8"54"19"69'9"2529 lbs.
    10EW4760MX110'0"13'8"60"18"68'2"2480 lbs.
    11EW4761MX111'0"14'8"61"19"69'0"2558 lbs.
    12EW4762MX112'0"15'8"62"20"69'9"2652 lbs.

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins