Tag Archives: Snow and Ice Control

MCF Series

 

pdf-button

  • icon
  • icon
  • icon

MCF - SERIES FEATURES AND BENEFITS

  1. Available in a variety of carbon and stainless steel materials for cost effectiveness, corrosion resistance and durability
  2. Heavy-duty 667XH conveyor chain for added strength and longevity. Other optional chain configurations available upon request.
  3. Prism-shaped tapered body allows compacted and irregularly shaped materials to exit the rear of the dump body without lodging.
  4. 6-panel tailgate with 1-1/2” diameter stainless steel pivot and locking pins for superior strength and corrosion resistance.
  5. Manifold grease system ensures all critical wear points are serviced.
  6. Central conveying system allows the Commander dump body to safely remain on the truck frame during operation.
  7. Hydraulic motor and planetary gearbox combination provides optimum torque to power the augers through the toughest unloading conditions.
  8. Tailgate is locked in place with twin pneumatic cylinders and over-center latch mechanisms to ensure trouble-free operation
  9. Stainless steel corner post and tailgate trip mechanism is standard on carbon steel models to provide additional corrosion resistance
  10. Front discharge conveying system delivers material ahead of rear tires for added traction.

MCF - Series OPTIONS

    OPTIONAL ACCESSORIES

  • Air foil
  • Cab shield
  • Chain oiler
  • Fenders - poly or metal
  • Light packages
  • Motor feedback sensor
  • Mud flaps
  • Observation ladder
  • Poly tank pre-wet systems
  • Body riser kit
  • Rear spill pan
  • Rear spill pan
  • Removable subfloor
  • Side boards - wood or metal
  • Tarp kits
  • Top apron screen
  • Vibrator

      BODY DIMENSIONS

    • Bulkhead height - 50-5/8"
    • Inside body width - 87"
    • Long sill height - 14-3/8"
    • Side wall height - 40-5/8"
    • Tailgate height - 49-3/8"

      BODY CONSTRUCTION

    • Bulkhead - 7 gauge
    • Floor - 1/4"
    • Long sill - 1/4"
    • Side wall - 7 gauge
    • Tailgate - 7 gauge


    MCF SERIES

    Model NumberBody LengthMin. Truck Chassis RequirementSide Wall CapacityTailgate CapacityHeaped Box CapacityMa. Liquid Capacity
    MCF099'72" C/A6.1 yds7.9 yds9.3 ydsN/A
    MCF1010'84" C/A6.9 yds8.8 yds10.4 ydsN/A
    MCF1111'196" C/A7.7 yds9.8 yds11.6 yds250 gal
    MCF1212'108" C/A8.5 yds10.8 yds12.8 yds250 gal
    MCF1313'96" C/T9.3 yds11.8 yds14.1 yds300 gal
    MCF1414'108" C/T10.1 yds12.8 yds15.3 yds300 gal
    MCF1515'-2"120" C/T10.9 yds13.8 yds16.5 yds540 gal
    MCF1616'-2"132" C/T11.7 yds14.7 yds17.5 yds540 gal

    Level Raise System

     

    pdf-button

    • icon
    • icon

    Level Raise System STANDARD FEATURES

    1. Can be set in any of 3 sets of holes enabling different degrees of leveling capability, increasing the workability with different types of hitch/lift arm combinations
    2. High Country Series
    3. Metropolitan Series
    4. Utility Series
    5. By shifting the positions of the chain hookup points on the plow using the Level Raise Lift System™, the table pin-up points and moldboard cutting edge remain parallel to the ground.(Top to Bottom Reversed to Right, Bulldoze, and Reversed to Left)

    FIXED UNDERBODY SCRAPER

     

    pdf-button

    • icon
    • icon
    • icon

    FIXED UNDER BODY SCRAPER STANDARD FEATURES

    1. Exclusive "zero insertion force" spring assembly for safer disassembly
    2. 5/8" x 20" smooth formed moldboard
    3. Greaseable 1 - 9/16" diameter shaft
    4. Down pressure cylinder with spring cushion provides positive scraping pressure on the road surface

    FIXED UNDER BODY SCRAPER OPTIONS

    • Curb shoes
    • 1" Thick Moldboard


    IMG_0206



    FIXED UNDERBODY SCRAPER SPECIFICATIONS

      
    MOLDBOARD THICKNESS5/8" or 1" Thickness
    MOLDBOARD LENGTHMODEL UBS120-FPD (10')
    MODEL UBS132-FPD (11')
    MODEL UBS144-FPD (12')
    MOLDBOARD HEIGHT17" or 20"
    DOWNPRESSURE CYLINDER3" Bore x 10" Stroke
    HINGE1 - 9/16" diameter x 70 - 1/2" long
    SPRING7/8" x 6' x 18-1/2"

    BAT WING EXTENSIONS

     

    pdf-button

    • icon
    • icon

    BAT WING SNOW PLOW STANDARD FEATURES

    1. Fold back wings for easy road transport
    2. Easy pin removal to convert to conventional plow
    3. Up to 18


    BAT WING PLOW SPECIFICATIONS

    BASE PLOWEXTENSION WIDTHTOTAL WIDTH
    10'24"14"
    11"24" - 30"15' - 16'
    12'24" - 36"16' - 18'

    * Not available with ALL PLOWS


    Call factory with your needs for a complete design consultation


    POLAR FLEX BLADES

     

    pdf-button

    • icon
    • icon

    POLAR FLEX BLADES STANDARD FEATURES

    1. CLASSIC MOUNT SERIES I - Heavy duty, one piece welded construction with a robust and rigid design
    2. FRONT MOUNT SERIES II - Less weight/lower height, easier segment changes, ideal for reversible plows and wings
    3. DIRECT MOUNT SERIES III - Doesn’t raise the moldboard height, and keeps the cost down on replacement parts because the mounting is built into the plow
    4. CLASSIC (SERIES I) - Flex elements and wear segments can be easily separated for environmentally safe recycling, a unique Polar FlexTM feature. Custom size configurations available on request, nose pieces & various styles of curb runners are available for both configurations Heat treated parts are warranted against breakage throughout the usable life of the part
    5. FRONT MOUNT (SERIES II) and DIRECT MOUNT (SERIES III) - Individual 12 inch carbide tipped steel segments are mounted using a patented system of reusable synthetic rubber flexible elements. This mounting technique significantly reduces vibration while simultaneously allowing the cutting edge to conform to the surface of the road. These two capabilities allow the system to clean the road better (less salt, fewer trips, safer roads) and reduce chatter (longer blade life, less plow maintenance, reduced operator fatigue)
    6. 7" x 4" x 1/2" Fully Boxed Bottom Angle


    SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHLEADING END HEIGHTDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGSCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    10TA2848MX110'0"11'28"
    48"14"68'2"2069 lbs.
    11TA2749MX111'0"
    12'
    27"
    49"15"69'0"2136 lbs.
    12TA2650MX112'0"13'
    26"
    50"16"69'9"2123 lbs.
    10TA3252MX110'0"12'
    32"52"16"68'2"2109 lbs.
    11TA3153MX111'0"13'
    31"53"17"69'0"2179 lbs.
    12TA3054MX112'0"14'
    30"54"19"69'9"2258 lbs.
    14TA3861MX110'0"12'
    39"60"18"68'2"2192 lbs.
    11TA3861MX111'0"13'
    38"61"19"69'0"2267 lbs.
    12TA3762MX112'0"14'
    37"62"20"69'9"2351 lbs.
    12TA272MX112'0"14'
    42"72"20"69'9"2351 lbs.

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    MTR SERIES

     

    pdf-button

    • icon
    • icon
    • icon

    MTR - SERIES FEATURES AND BENEFITS

    1. Available in a variety of carbon and stainless steel materials for cost effectiveness, corrosion resistance and durability
    2. Twin opposing 7” hard-faced multi-pitched augers evenly unload material from inside the dump body
    3. Auger design prevents material from contaminating the underside of the truck’s chassis
    4. Standard galvanized top screen keeps large chunks of material from being loaded into the dump body
    5. Removable auger pan ensures damage-free protection during the off-season
    6. For general hauling applications, tapered sidewall design allows compacted and irregularly-shaped material to exit the rear of the dump body without lodging
    7. 6-panel tailgate with 1-1/2” diameter pivot and locking pins for superior strength and impact resistance
    8. Manifold grease system ensures all critical wear points are serviced
    9. Central conveying system allows the Commander dump body to safely remain on the truck chassis during operation
    10. Twin hydraulic motor and planetary gearbox combination provides optimum torque to power the augers through the toughest unloading conditions

    MTR - SERIES OPTIONS

      OPTIONAL ACCESSORIES

    • Air foil
    • Auger pan winter cover
    • Cab shield
    • Fenders - poly or metal
    • Light packages
    • Motor feedback sensor
    • Poly tank pre-wet system
    • Rear material spreader
    • Rear spill pan
    • Mud flaps
    • Observation ladder
    • Side boards - wood or metal
    • Summer replacement floor
    • Tarp Kit
    • Vibrator
    • Top apron screens
    • Gravel chute

        BODY CONSTRUCTION

      • Bulkhead - 7 gauge
      • Floor - 7 gauge
      • Long sill - 1/4"
      • Side wall - 7 gauge
      • Tailgate - 7 gauge

        BODY DIMENSION

      • Bulkhead height - 50 - 5/8"
      • Inside body width - 87"
      • Long sill height - 14 - 3/8"
      • Side wall height - 40 - 5/8"
      • Tailgate height - 49 - 3/8"



      MTR - Series SPECIFICATIONS

      MODEL NUMBERBODY LENGTHTRUCK CHASSISSIDE WALL CAPACITYTAILGATE CAPACITYHEAPED BOX CAPACITYMAX LIQUID CAPACITY
      MTR099'72" C/A6.1 yd7.9 yd9.3 yrd250 gal
      MTR1010'84" C/A6.9 yd8.8 yd10.4 yrd300 gal
      MTR1111'96" C/A7.7 yd9.8 yd11.6 yrd300 gal
      MTR1212'108" C/A8.5 yd10.8 yd12.8 yrd540 gal
      MTR1313'108" C/T9.3 yd11.8 yd14.1 yrd540 gal
      MTR1414'120" C/T10.1 yd12.8yd15.3 yrd540 gal
      MTR1515' - 2"132" C/T10.9 yd13.8 yd16.4 yrd540 gal
      MTR1616' - 2"144" C/T11.7 yd14.7 yd17.5 yrd540 gal

      NNR SERIES

       

      pdf-button

      • icon
      • icon
      • icon

      NNR Series STANDARD FEATURES

      1. Prism-shaped tapered body allows compacted and irregularly shaped materials to exit the rear of the dump body without lodging
      2. 6-panel tailgate with 1-1/2" diameter pivot and locking pins for superior strength and impact resistance
      3. Stainless steel corner post and tailgate trip mechanism is standard on carbon steel models to provide additional corrosion resistance

      NNRSeries OPTIONS

      • Air Foil
      • Cab shield
      • Fenders - poly or metal
      • Light packages
      • Mud Flaps
      • Observation ladder
      • Poly tank pre-wet system
      • Rear material spreader
      • Rear spill pan
      • Side boards - wood or metal
      • Specialty conveyor chains
      • Tarp kit
      • Top apron screen
      • Vibrator
      • Poly tank brackets
      • Foam-Filled Rubber Tires*
        *Should not be used with Cable Wrap Lift Assemblies

        BODY DIMENSIONS

      • Bulkhead height - 50-5/8"
      • Inside body width - 87"
      • Long sill height - 14-3/8"
      • Side wall height - 40-5/8"
      • Tailgate height - 49-3/8"

        BODY CONSTRUCTION

      • Bulkhead - 7 gauge
      • Floor - 1/4"
      • Long sill - 1/4"
      • Side wall - 7 gauge
      • Tailgate - 7 gauge



      NNR - Series SPECIFICATIONS

      MODEL NUMBERBODY LENGTHTRUCK CHASSISSIDE WALL CAPACITYTAILGATE CAPACITYHOIST BORE AND STROKERAISED DUMP ANGLE
      NNR099'72" C/A6.3 yd8.2 yd4-1/2" x 90"61˚
      NNR1010'84" C/A7.1 yd9.1 yd4-1/2" x 90"53˚
      NNR1111'96" C/A8.0 yd10.1 yd4-1/2" x 100"53˚
      NNR1212'108" C/A8.8 yd11.2 yd5-1/2" x 110"52˚
      NNR1313'108" C/T9.6 yd12.1 yd5-1/2" x 120"52˚
      NNR1414'120" C/T10.4 yd13.1 yd5-1/2" x 130"52˚
      NNR1515' - 2"132" C/T11.3 yd14.2 yd6-1/2" x 140"52˚
      NNR1616' - 2"144" C/T12.1 yd15.2 yd6-1/2" x 150"52˚

      MCR Series

       

      • icon
      • icon
      • icon

      MCR - Series FEATURES AND BENEFITS

      1. Available in a variety of carbon and stainless steel materials for cost effectiveness, corrosion resistance and added durability
      2. Prism-shaped tapered body allows compacted and irregularly shaped materials to exit the rear of the dump body without lodging
      3. Manifold grease system ensures all critical wear points are serviced
      4. Hydraulic motor and planetary gearbox combination provides optimum torque to power the conveyor chain through the toughest unloading conditions
      5. Heavy-duty 667XH conveyor chain for added strength and longevity. Other optional chain configurations available upon request.
      6. 6-panel tailgate with 1-1/2” diameter pivot and locking pins for superior strength and impact resistance
      7. Central conveying system allows the Commander dump body to remain safely on the truck chassis during operation
      8. Tailgate is locked in place with twin pneumatic cylinders and over-center latch mechanisms to ensure trouble-free operation
      9. Stainless steel corner post and tailgate trip mechanism is standard on carbon steel models to provide additional corrosion resistance

      MCR - Series OPTIONS

        OPTIONAL ACCESSORIES

      • Air foil
      • Cab shield
      • Chain oiler
      • Fenders - poly or metal
      • Light packages
      • Motor feedback sensor
      • Mud flaps
      • Observation ladder
      • Poly tank pre-wet systems
      • Body riser kit
      • Rear material spreaders
      • Rear spill pan
      • Removable subfloor with cleanout door
      • Side boards - wood or metal
      • Tarp kits
      • Top apron screen
      • Vibrator
      • Poly tank brackets

          BODY DIMENSIONS

        • Bulkhead height - 50-5/8"
        • Inside body width - 87"
        • Long sill height - 14-3/8"
        • Side wall height - 40-5/8"
        • Tailgate height - 49-3/8"

          BODY CONSTRUCTION

        • Bulkhead - 7 gauge
        • Floor - 1/4"
        • Long sill - 1/4"
        • Side wall - 7 gauge
        • Tailgate - 7 gauge



        MCR - Series SPECIFICATIONS

        MODEL NUMBERBODY LENGTHTRUCK CHASSISSIDE WALL CAPACITYTAILGATE CAPACITYHEAPED BODY CAPACITYMAX LIQUID CAPACITY
        MCR099'72" C/A6.3 yd8.2 yd9.6 yrd250 gal
        MCR1010'84" C/A7.1 yd9.1 yd10.7 yrd300 gal
        MCR1111'96" C/A8.0 yd10.1 yd11.9 yrd300 gal
        MCR1212'108" C/A8.8 yd11.2 yd13.1 yrd380 gal
        MCR1313'108" C/T9.6 yd12.1 yd14.4 yrd540 gal
        MCR1414'120" C/T10.4 yd13.1 yd15.6 yrd540 gal
        MCR1515' - 2"132" C/T11.3 yd14.2 yd16.8 yrd540 gal
        MCR1616' - 2"144" C/T12.1 yd15.2 yd18.0 yrd550 gal

        JUNIOR WING

         

        pdf-button

        • icon
        • icon
        • icon

        JUNIOR WING STANDARD FEATURES

        1. Heavy duty construction using (5) 3/8" ribs
        2. 10-Gauge moldboard shell
        3. 7" x 4" 1/2" Fully boxed bottom angle or optional 4" x 4" x 1/2" trip edge with independently replaceable trip springs
        4. Heavy duty, independent non-binding float mechanism keeps the toe of the moldboard on the ground, where you want it
        5. Heavy duty 6" x 4" x 3/8" cross tube

        JUNIOR WING OPTIONS

          Options

        • Rear Mount Kits for use with Under Body Scrapers



        MID MOUNT WING SPECIFICATIONS

         6TEWMM7TEWMM8TEWMM6NTWMM7NTWMM8NTWMM
        OVERALL LENGTH6'-3"7'-3"8'-36'-3"7'-3"8'-3"
        CUTTING EDGE LENGTH6'7'8'6'7'8'
        CUTTING SWATH @ 44 DEGREE4'-2"4'-10"5'-6"4'-2"4'-10"5'-6"
        CUTTING EDGE SIZE3/4" x 6"3/4" x 6"3/4" x 6"N/AN/AN/A
        HEIGHT26"26"26"26"26"26"
        TRIP ASSEMBLY(2) 7/8" TORSION SPRING(3) 7/8" TORSION SPRING(4) 3/4" TORSION SPRINGN/AN/ANA
        MOLDBOARD (ALL MODELS)10 Gauge Carbon Steel10 Gauge Carbon Steel10 Gauge Carbon Steel10 Gauge Carbon Steel10 Gauge Carbon Steel10 Gauge Carbon Steel
        TRIPE EDGE ANGLE CONSTRUCTION (ALL MODELS)5” x 3” x 1/2” with 1/2” gussets5” x 3” x 1/2” with 1/2” gussets5” x 3” x 1/2” with 1/2” gussets7” x 4” x 1/2” with 3/8” gussets7” x 4” x 1/2” with 3/8” gussets7” x 4” x 1/2” with 3/8” gussets
        HEEL LIFT CYLINDER (ALL MODELS)
        3” x 10” Stroke with 2” Chrome Rod3” x 10” Stroke with 2” Chrome Rod3” x 10” Stroke with 2” Chrome Rod3” x 10” Stroke with 2” Chrome Rod3” x 10” Stroke with 2” Chrome Rod3” x 10” Stroke with 2” Chrome Rod
        TOE LIFT CYLINDER (ALL MODELS)2-1/2” x 14” Stroke with 1-1/2” Chrome Rod2-1/2” x 14” Stroke with 1-1/2” Chrome Rod2-1/2” x 14” Stroke with 1-1/2” Chrome Rod2-1/2” x 14” Stroke with 1-1/2” Chrome Rod2-1/2” x 14” Stroke with 1-1/2” Chrome Rod2-1/2” x 14” Stroke with 1-1/2” Chrome Rod
        CROSS TUBES (ALL MODELS)6” x 4” x 3/8” Wall Rectangular Tubing6” x 4” x 3/8” Wall Rectangular Tubing6” x 4” x 3/8” Wall Rectangular Tubing6” x 4” x 3/8” Wall Rectangular Tubing6” x 4” x 3/8” Wall Rectangular Tubing6” x 4” x 3/8” Wall Rectangular Tubing
        PUSH BAR1-Telescoping, Spring Buffered1-Telescoping, Spring Buffered1-Telescoping, Spring Buffered1-Telescoping, Spring Buffered1-Telescoping, Spring Buffered1-Telescoping, Spring Buffered
        FINISHOmaha Orange Standard, other colors avail.Omaha Orange Standard, other colors avail.Omaha Orange Standard, other colors avail.Omaha Orange Standard, other colors avail.Omaha Orange Standard, other colors avail.Omaha Orange Standard, other colors avail.

        Making our roads safe and clear is Bonnell’s primary goal. When the snow is falling fast, you need the equipment that will help you remove the maximum amount of snow in less time.

        The Bonnell Mid-Mount Wing is specifically designed to enhance snow removal effectiveness by expanding the total plowing width, thus minimizing the number of passes needed to clear the road. This versitile attachment will keep the truck on the road while moving the snow farther off the road.

        Under-Tailgate Spreader

         

        pdf-button

        • icon
        • icon
        • icon

        UNDER TAILGATE SPREADER STANDARD FEATURES

        1. One piece rigid body with end plates continuously welded to auger trough
        2. Adjustable height spinner assembly, pinned on to bottom door, with 18” poly spinner disc
        3. Hydraulic safety interlock system
        4. Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control.

        UNDER TAILGATE SPREADEROPTIONS

        • Special paint
        • Berm chute (standard on U996)
        • Light bars
        • Stainless steel - AS
        • Gearbox drive - GB
        • Center, left or right discharge
        • Sensored motor
        • Prewet boom



        UNDERTAILGATE SPREADER SPECIFICATIONS

        U-SERIES SPREADERU696-DDU996-DD
        WEIGHT665 LBS760 LBS
        END PLATES1/4 Carbon7 Gauge Stainless
        AUGER CONFIGURATION1-6" Diameter x 4" Pitch1-9" diameter x 4" Pitch
        LENGTH96"96"
        HEIGHT(WITHOUT SPINNER)19"19"
        HEIGHT(WITH SPINNER)35"35"
        WIDTH(WITHOUT SPINNER)20.5"20.5"
        WIDTH(WITH SPINNER)20.5"20.5"
        SPINNER DIAMETER/MATERIAL18" Polyurethane 18" Polyurethane
        TROUGH MATERIAL7 Gauge Formed7 Gauge Formed
        AUGER DRIVEDirect DriveDirect Drive

        The Under Tailgate Spreader from Bonnell Industries is the most rugged on the market today. Available in either carbon or stainless steel construction, and with direct drive or gearbox drive options, Bonnell Industries has the undertailgate spreader that fits your application. Safety, quality and durability– Bonnell Industries is the only name you need to know in snow and ice control.

        Quick Mount Kit – Quickly mount and dismount your spreader by removing 4 pins (no bolts). Brackets are bolted to the spreader body for replacement and adjustment purposes.

        Easy adjustment of the anti-flow plate without the use of tools.

         

        Replacement-Tailgate Spreader

         

        pdf-button

        • icon
        • icon
        • icon

        REPLACEMENT TAILGATE SPREADER STANDARD FEATURES

        1. Full width agitator is driven by a roller chain off the auger shaft
        2. 3/16" bottom clean out door with a hydraulic safety interlock system
        3. Adjustable height hot dip galvanized spinner assembly, pin on to bottom door, with 18” poly spinner disc. Highest tailgate spreader spinner ground clearance available

        REPLACEMENT TAILGATE SPREADEROPTIONS

        • Stainless steel
        • Pre-wet systems
        • Center, left, or right discharge
        • Special Paint
        • Dual motor drive in lieu of chain drive or agitator
        • Hot dip galvanized housing and door
        • Berm chute
        • Sensored motor
        • Hydro control valve
        • Hose kit(s)



        REPLACEMENT TAILGATE SPREADER SPECIFICATIONS

        MODELAUGERWIDTHHEIGHTR69699
        R69-DD-84226"84"22.5"
        R69-DD-84366"84"36"
        R69-DD-84466"84"46"
        R99-DD-84366"84"36"
        R99-DD-84466"84"46"
        SPINNER DIAMETER/MATERIAL18" Polyurethane18" Polyurethane
        TROUGH MATERIAL3/16" Formed3/16" Formed
        END PLATES1/4"1/4"
        AUGER CONFIGURATION1 - 6" Diameter x 4" pitch1 - 9" Diameter x 4" pitch
        AUGER DRIVEDirect driveDirect drive

        Replacement Tailgate Spreaders from Bonnell Industries are designed to replace the existing tailgate, providing the highest spinner ground clearance possible. They are engineered for use with light, medium and heavy duty trucks. The hinged bottom cleanout door cannot be fully opened without disconnecting the hydraulic hoses providing the ultimate safety for your operator.

        Our auger is driven by a direct drive hydraulic motor. Our full-width agitator is driven by a roller chain off the auger shaft. You can rely on the agitator and 6″ or 9” continuous-flited auger to ensure constant material flow. Both the R-161 and R-191 replacement tailgate spreader models fasten to existing dump body hardware for fast mounting and removal without the use of special tools.

        Our standard polymer spinner disc eliminates the need to replace corroded steel fins. The adjustable spinner assembly remains parallel to the road at all dump box angles and can be easily removed by pulling two pins and uncoupling two quick-disconnect hoses.

        BVA V-Box

         

        pdf-button

        • icon
        • icon
        • icon

        BVA-SERIES V-BOX SPREADERS STANDARD FEATURES

        1. 10 Gauge hopper sides, 7 gauge longsills, 7 gauge auger trough "CS" Carbon
        2. 12 Gauge hopper sides, 10 gauge longsills, 10 gauge auger trough "SS" Carbon
        3. Direct drive motor
        4. Side swing up spinner with 18" steel spinner disc
        5. 7” diameter hard surfaced auger with three pitch settings for even unloading, four bolt self-aligning ball bearing at front of auger, greasable from the rear of spreader
        6. Top screens

        BVA-SERIES SPREADER OPTIONS

        • Hand crank winch for swing up spinner
        • Pre-wet systems
        • Mounting kits
        • Ladders
        • Cabshields
        • Catwalks
        • 12 gauge stainless steel V-box construction (optional 10-gauge stainless)
        • Wireless camera system
        • Engine over hydraulic systems
        • Rear diverted
        • Top mount spinner motor
        • 20" Poly spinner
        • Doghouse cutout for dump body hoist



        BVA - SERIES SPREADER SPECIFICATIONS

        MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
        BVA-10-4810'48"84"5.62385 LBS
        BVA-10-5410'54"84"6.92480 LBS
        BVA-10-6010'60"84"8.32575 lbs
        BVA-11-4811'48"96"6.22525 LBS
        BVA-11-5411'54"96"7.62625 LBS
        BVA-11-6011'60"96"9.02725 LBS
        BVA-12-4812'48"108"6.82695 LBS
        BVA-12-5412'54"108"8.42800 LBS
        BVA-12-6012'60"108"9.92905 LBS
        BVA-13-4813'48"96" C.T.7.32835 LBS
        BVA-13-5413'54"96" C.T.9.02945 LBS
        BVA-13-6013'60"96" C.T.10.73055 LBS
        BVA-14-4814'48"108" C.T.7.93005 LBS
        BVA-14-5414'54"108" C.T.9.73120 LBS
        BVA-14-6014'60"108" C.T.11.63235 LBS
        BVA-15-4815'48"120" C.T.8.43145 LBS
        BVA-15-5415'54"120" C.T.10.33265 LBS
        BVA-15-6015'60"120" C.T.12.23385 LBS
        BVA-16-4816'48"132" C.T.8.93585 LBS
        BVA-16-5416'54"132" C.T.10.93705 LBS
        BVA-16-6016'60"132" C.T.13.03825 LBS

        The Bonnell “BVA” Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

        Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

        The Bonnell “BVA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

        Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

        More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BVA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through many winters to come.

        CARBON STEEL BODY

        Constructed of 10 gauge steel with 45º sloping sides with 10 gauge side supports for high resistance to twisting under heavy loads.

        AUGER

        7” Hard faced auger with direct drive.

        SPINNER ASSEMBLY

        Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

        TOP SCREENS

        Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

        INVERTED V

        Standard equipment with the purchase of BVA spreader.

        GREASE EXTENSION

        Grease extension to the rear-standard equipment.

        BVDA Dual Auger V-Box

         

        pdf-button

        • icon
        • icon
        • icon

        BVDA-SERIES V-BOX SPREADERS STANDARD FEATURES

        1. 10 Gauge hopper sides, 7 gauge lonsills, 7 gauge auger trough ("CS" Carbon)
        2. 12 Gauge hopper sides, 10 gauge lonsills, 10 gauge auger trough ("SS" Carbon)
        3. Twin counter-rotating 7” diameter hard surfaced augers with three pitch settings for even unloading, two bolt self-aligning ball bearings at rear of auger
        4. Rear swing up spinner with 18" steel spinner disc
        5. Twin planetary drive system, protected at front of hopper
        6. Inverted V
        7. Galvanized top screens

        BVDA-SERIES V-BOX SPREADERS OPTIONS

        • Poly light bar
        • 12 gauge stainless steel V-box construction (optional 10 gauge stainless)
        • Poly tanks
        • Hand crank winch for swing up spinner
        • Pre-wet systems
        • Leg stand kits
        • Lighting packages
        • Spill shields
        • Ladders
        • Doghouse cutout for dump body hoist
        • Mounting kits
        • Catwalks or fenders
        • Cabshield
        • Engine over hydraulic systems
        • 20" Poly spinner
        • Rear diverter chute
        • Rear planetary drive
        • Rear direct drive
        • Various spinner assemblies
        • Feed gate



        BVDA - SERIES SPREADER SPECIFICATIONS

        MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
        BVDA-10-4810'48"84"5.62685 LBS
        BVDA-10-5410'54"84"6.92780 LBS
        BVDA-10-6010'60"84"8.32875 lbs
        BVDA-11-4811'48"96"6.22825 LBS
        BVDA-11-5411'54"96"7.62925 LBS
        BVDA-11-6011'60"96"9.03025 LBS
        BVDA-12-4812'48"96"6.82995 LBS
        BVDA-12-5412'54"96"8.43100 LBS
        BVDA-12-6012'60"96"9.93205 LBS
        BVDA-13-4813'48"96" C.T.7.33135 LBS
        BVDA-13-5413'54"96" C.T.9.03245 LBS
        BVDA-13-6013'60"96" C.T.10.73355 LBS
        BVDA-14-4814'48"108" C.T.7.93305 LBS
        BVDA-14-5414'54"108"" C.T.9.73420 LBS
        BVDA-14-6014'60"108"" C.T.11.63535 LBS
        BVDA-15-4815'48"120" C.T.8.43445 LBS
        BVDA-15-5415'54"120" C.T.10.33565 LBS
        BVDA-15-6015'60"120" C.T.12.23685 LBS
        BVDA-16-4816'48"132" C.T.8.93585 LBS
        BVDA-16-5416'54"132" C.T.10.93705 LBS
        BVDA-16-6016'60"132" C.T.13.03,825 LBS

        The Bonnell “BVDA” Dual Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

        Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

        The Bonnell “BVDA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

        Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

        Optional equipment and upgrades also available. Call Bonnell today to order your BVDA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through
        many winters to come.

        Rubber Tire Assembly

         

        pdf-button

        • icon
        • icon

        Rubber Tire Assembly STANDARD FEATURES

        1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
        2. Greasable hub bearing on wheel assemblies
        3. Exclusive Spin-Easy crank handle


        RUBBER TIRE ASSEMBLY SPECIFICATIONS

        PART NUMBERMOUNT TYPEWHEEL TYPETIRE SIZE/TYPEAXLE SIZESCREW SIZEOUTER HOUSINGINNER POST
        BON-002600TOP MOUNTPNEUMATIC5.70-8, 8 PLY
        1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
        BON-002600-FFTOP MOUNT
        FOAM FILLED
        5.00-8, 10 PLY FORK LIFT
        1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
        BON-001335FACE MOUNTPNEUMATIC
        5.70-8, 8 PLY
        1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
        BON-001335-FFFACE MOUNTFOAM FILLED
        5.00-8, 10 PLY FORK LIFT1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE

        Rubber tire assemblies feature either 5.70 X 8.0 Pneumatic tires or foam filled tires on a heavy-duty cast hub. These tires are offered on a swivel arrangement, allowing the tire to trail in the direction of travel. These assemblies do not caster 360°.

        Mushroom Shoe Assembly

         

        pdf-button

        • icon
        • icon

        Mushroom Shoe Assembly STANDARD FEATURES

        1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
        2. Greasable hub bearing on wheel assemblies
        3. Exclusive Spin-Easy crank handle


        MUSHROOM SHOE ASSEMBLY SPECIFICATIONS

        PART NUMBERFITS BRANDAPPLICATIONSHOE SIZESHOE TYPESCREW SIZEOUTER HOUSINGINNER POST
        BON-001325BONNELLANY PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, ANGLED1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
        BON-001325.5BONNELLFIXED ANGLE/V PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, SQUARE1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
        BON-001328BONNELLANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
        BON-001328MMONROE, GLEDHILL, HENKEANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
        BON-001326BONNELLANY PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, ANGLED1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
        BON-001326.5BONNELLFIXED ANGLE/V PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, SQUARE1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
        BON-001329BONNELLANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
        BON-001329MMONROE, GLEDHILL, HENKEANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE

        This shoe assembly features a heavy-duty cast ductile shoe which gets its name from its inverted mushroom-type shape. The telescopic assembly is Offered in both standard (2”post) or heavy-duty (2-1/2” post) versions.