BV-Series V-Box Spreader

BV - SERIES V-BOX SPREADER STANDARD FEATURES

10 gauge hopper sides "CS" Carbon 7 gauge longsill
12 gauge hopper sides "SS" Stainless 10 gauge longsills
Top screens
50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
Swing up spinner with 18" steel spinner disc

BV-SERIES V-BOX SPREADEROPTIONS

Plow Lift Options

Chain
10-gauge stainless steel V-box construction
Sloping front
Auger feed
Observation platform
20" poly spinner
Cabshield
Grease extension to rear
Catwalks
Light kits
Winch for spinner
Pre-wet system
Mounting kit
Inverted V
Chain oiler
Wireless camera system
Belt over conveyor chain
Engine over hydraulic systems
Rear diverter
Top mount spinner motor

BV - SERIES SPREADER SPECIFICATIONS

MODEL NUMBER	V-BOX LENGTH	V-BOX HEIGHT	CAB TO AXLE	CUBIC YARD CAPACITY	APPROXIMATE WEIGHT
BV-10-50	10'	50"	84"	5.5	2385 LBS
BV-10-56	10'	56	84"	6.7	2480 LBS
BV-10-62	10'	62'	84"	7.9	2575 lbs
BV-11-50	11'	50"	96"	6.1	2525 LBS
BV-11-56	11'	56"	96"	7.4	2625 LBS
BV-11-62	11'	62"	96"	8.7	2725 LBS
BV-12-50	12'	50"	108"	6.6	2695 LBS
BV-12-56	12'	56"	108"	8.1	2800 LBS
BV-12-62	12'	62"	108"	9.5	2905 LBS
BV-13-50	13'	50"	108" C.T.	7.0	2835 LBS
BV-13-56	13'	56"	108" C.T.	8.6	2945 LBS
BV-13-62	13'	62"	108" C.T.	10.4	3055 LBS
BV-14-50	14'	50"	120 C.T.	7.8	3005 LBS
BV-14-56	14'	56"	120" C.T.	9.5	3120 LBS
BV-14-62	14'	56"	120" C.T.	11.2	3235 LBS
BV-15-50	15'	50"	132" C.T.	8.3	3145 LBS
BV-15-56	15'	56"	132" C.T.	10.2	3265 LBS
BV-15-62	15'	62"	132" C.T.	12.0	3385 LBS

CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

WB – 100B & WB – 160D Walk – Behind

WB - 100B and WB - 160D Walk - Behind STANDARD FEATURES

Clear Hopper Cover
(3) Pneumatic tires
Powder coated steel frame

WB - 100B & WB and 160D WALK - BEHIND SPECIFICATIONS

MODEL	WB - 100B	WB - 160D
HOPPER CONSTRUCTION	Polyethylene	Polyethylene
CAPACITY	100 lb	100 lb
DIMENSION OVERALL ( L x W x H)	50" x 26" x 28"	48" x 38¼" x 36"
APPROXIMATE WEIGHT (EMPTY)	25 lb	25 lb
SPINNER SIZE	10"
SPREADING WIDTH	Up to 20"	3'
MATERIALS	Bagged ice melter and salt	Bagged ice melter and salt

Whether you’re drop spreading along narrow walkways, or broadcast-spreading across wider areas, WESTERN Professional Walk-Behind Spreaders will get the job done.

PRO-FLO 525

PRO FLOW 525 STANDARD FEATURES

Holds up to 420 lb of bagged or bulk deicing material
Comes standard with a combination 2" Receiver Hitch and 2 point Combo Mount
Heavy duty horizontal auger built of solid powder coated steel for strength and performance
10"nylon/glass reinforced resin (PRO-FLOW™ 525)
Steel rod top screen to break up chunks while loading for improved performance
Molded polyethylene lid to protect material from elements
Standard vibrating inverted V to break up clumps and ensure smooth material flow

PRO FLOW 525 SPECIFICATIONS

MODEL	PRO FLO 525
CAPACITY	5.25 Cubic feet
HOPPER CONSTRUCTION	Polyethylene
DIMENSION OVERALL ( L x W x H)	20 1/2" x 38" x 34"
APPROXIMATE WEIGHT (EMPTY)	160 lb
ELECTRIC MOTOR	Dual 12-volt 1/3 hp
AUGER (DIAMETER x LENGTH)	3" x 14" (Heavy Duty Solid Steel)
SPINNER SIZE	10"
SPREADING WIDTH	Up to 30"
MATERIALS	Bagged Rock Salt, San, 50/50 Salt/Sand Mix
VEHICLE APPLICATION	Tractors, SUVs, 1-Ton or Smaller Pickups
AVAILABLE MOUNTS	Standard 2" Receiver, 3 point Combo Mount

For precise ice control performance, turn to the powerfully versatile PRO-FLO^™ 525 Tailgate Spreaders. A 2-stage, auger-fed delivery system and independent variable speed control provide consistent and efficient flow of all types of de-icing materials, including rock salt and sand. Designed to attach to a wide variety of vehicles, it’s versatile enough for any job site or surface condition.

NNR SERIES

NNR Series STANDARD FEATURES

Prism-shaped tapered body allows compacted and irregularly shaped materials to exit the rear of the dump body without lodging
6-panel tailgate with 1-1/2" diameter pivot and locking pins for superior strength and impact resistance
Stainless steel corner post and tailgate trip mechanism is standard on carbon steel models to provide additional corrosion resistance

NNRSeries OPTIONS

Air Foil
Cab shield
Fenders - poly or metal
Light packages
Mud Flaps
Observation ladder
Poly tank pre-wet system
Rear material spreader
Rear spill pan
Side boards - wood or metal
Specialty conveyor chains
Tarp kit
Top apron screen
Vibrator
Poly tank brackets
Foam-Filled Rubber Tires*
*Should not be used with Cable Wrap Lift Assemblies

BODY DIMENSIONS

Bulkhead height - 50-5/8"
Inside body width - 87"
Long sill height - 14-3/8"
Side wall height - 40-5/8"
Tailgate height - 49-3/8"

BODY CONSTRUCTION

Bulkhead - 7 gauge
Floor - 1/4"
Long sill - 1/4"
Side wall - 7 gauge
Tailgate - 7 gauge

NNR - Series SPECIFICATIONS

MODEL NUMBER	BODY LENGTH	TRUCK CHASSIS	SIDE WALL CAPACITY	TAILGATE CAPACITY	HOIST BORE AND STROKE	RAISED DUMP ANGLE
NNR09	9'	72" C/A	6.3 yd	8.2 yd	4-1/2" x 90"	61˚
NNR10	10'	84" C/A	7.1 yd	9.1 yd	4-1/2" x 90"	53˚
NNR11	11'	96" C/A	8.0 yd	10.1 yd	4-1/2" x 100"	53˚
NNR12	12'	108" C/A	8.8 yd	11.2 yd	5-1/2" x 110"	52˚
NNR13	13'	108" C/T	9.6 yd	12.1 yd	5-1/2" x 120"	52˚
NNR14	14'	120" C/T	10.4 yd	13.1 yd	5-1/2" x 130"	52˚
NNR15	15' - 2"	132" C/T	11.3 yd	14.2 yd	6-1/2" x 140"	52˚
NNR16	16' - 2"	144" C/T	12.1 yd	15.2 yd	6-1/2" x 150"	52˚

Under-Tailgate Spreader

UNDER TAILGATE SPREADER STANDARD FEATURES

One piece rigid body with end plates continuously welded to auger trough
Adjustable height spinner assembly, pinned on to bottom door, with 18” poly spinner disc
Hydraulic safety interlock system
Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control.

UNDER TAILGATE SPREADEROPTIONS

Special paint
Berm chute (standard on U996)
Light bars
Stainless steel - AS
Gearbox drive - GB
Center, left or right discharge
Sensored motor
Prewet boom

UNDERTAILGATE SPREADER SPECIFICATIONS

U-SERIES SPREADER	U696-DD	U996-DD
WEIGHT	665 LBS	760 LBS
END PLATES	1/4 Carbon	7 Gauge Stainless
AUGER CONFIGURATION	1-6" Diameter x 4" Pitch	1-9" diameter x 4" Pitch
LENGTH	96"	96"
HEIGHT(WITHOUT SPINNER)	19"	19"
HEIGHT(WITH SPINNER)	35"	35"
WIDTH(WITHOUT SPINNER)	20.5"	20.5"
WIDTH(WITH SPINNER)	20.5"	20.5"
SPINNER DIAMETER/MATERIAL	18" Polyurethane	18" Polyurethane
TROUGH MATERIAL	7 Gauge Formed	7 Gauge Formed
AUGER DRIVE	Direct Drive	Direct Drive

The Under Tailgate Spreader from Bonnell Industries is the most rugged on the market today. Available in either carbon or stainless steel construction, and with direct drive or gearbox drive options, Bonnell Industries has the undertailgate spreader that fits your application. Safety, quality and durability– Bonnell Industries is the only name you need to know in snow and ice control.

Quick Mount Kit – Quickly mount and dismount your spreader by removing 4 pins (no bolts). Brackets are bolted to the spreader body for replacement and adjustment purposes.

Easy adjustment of the anti-flow plate without the use of tools.

Replacement-Tailgate Spreader

REPLACEMENT TAILGATE SPREADER STANDARD FEATURES

Full width agitator is driven by a roller chain off the auger shaft
3/16" bottom clean out door with a hydraulic safety interlock system
Adjustable height hot dip galvanized spinner assembly, pin on to bottom door, with 18” poly spinner disc. Highest tailgate spreader spinner ground clearance available

REPLACEMENT TAILGATE SPREADEROPTIONS

Stainless steel
Pre-wet systems
Center, left, or right discharge
Special Paint

Dual motor drive in lieu of chain drive or agitator
Hot dip galvanized housing and door
Berm chute
Sensored motor
Hydro control valve
Hose kit(s)

REPLACEMENT TAILGATE SPREADER SPECIFICATIONS

MODEL	AUGER	WIDTH	HEIGHT	R69	699
R69-DD-8422	6"	84"	22.5"
R69-DD-8436	6"	84"	36"
R69-DD-8446	6"	84"	46"
R99-DD-8436	6"	84"	36"
R99-DD-8446	6"	84"	46"

SPINNER DIAMETER/MATERIAL				18" Polyurethane	18" Polyurethane
TROUGH MATERIAL				3/16" Formed	3/16" Formed
END PLATES				1/4"	1/4"
AUGER CONFIGURATION				1 - 6" Diameter x 4" pitch	1 - 9" Diameter x 4" pitch
AUGER DRIVE				Direct drive	Direct drive

Replacement Tailgate Spreaders from Bonnell Industries are designed to replace the existing tailgate, providing the highest spinner ground clearance possible. They are engineered for use with light, medium and heavy duty trucks. The hinged bottom cleanout door cannot be fully opened without disconnecting the hydraulic hoses providing the ultimate safety for your operator.

Our auger is driven by a direct drive hydraulic motor. Our full-width agitator is driven by a roller chain off the auger shaft. You can rely on the agitator and 6″ or 9” continuous-flited auger to ensure constant material flow. Both the R-161 and R-191 replacement tailgate spreader models fasten to existing dump body hardware for fast mounting and removal without the use of special tools.

Our standard polymer spinner disc eliminates the need to replace corroded steel fins. The adjustable spinner assembly remains parallel to the road at all dump box angles and can be easily removed by pulling two pins and uncoupling two quick-disconnect hoses.