Tag Archives: Salt Spreaders

BONNELL 16′ X 62″ VBOX SALT SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc

BV-SERIES V-BOX SPREADER OPTIONS

    OPTIONS INSTALLED ON STOCK UNITS S/N 2548 & 2549

  • 20" Poly Disc in Lieu of the 18" Steel
  • Inverted V
  • Galvanized Top Screens



IN STOCK BV-16-62 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO TRUNIONCUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-16-6216'62"144"12.83540 LBS$12,724

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


12.8 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Stainless Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Carbon Steel Painted Orange, All Options Painted Black


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

BONNELL 10′ X 56″ VBOX SPREADER CARBON STEEL

 

pdf-button

  • icon
  • icon

BV - SERIES V-BOX SPREADER STANDARD FEATURES

  1. 10 gauge hopper sides "CS" Carbon 7 gauge longsill
  2. 12 gauge hopper sides "SS" Stainless 10 gauge longsills
  3. Top screens
  4. 50:1 gear box, 1.5" drive shaft and 8 tooth sprockets are provided for a longer drag chain life
  5. Swing up spinner with 18" steel spinner disc


IN STOCK BV-10-56 V-BOX SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHTPRICING
BV-10-5610'5684"6.72480 LBS$9,500

* IN STOCK SPECIFICATIONS OF V-BOX SPREADER


6.7 Cubic Yard Capacity


Carbon Steel


Hydraulic Drive


10-Gauge Carbon Steel Sides and Ends


7-Gauge Longsills


7-Gauge Bolt-In Replaceable Floor


Sides Sloped 45 Degrees


Hopper Body 82" Wide


50:1 Gearbox Drive


Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides


8 Tooth Sprocket


1 1/2" Drive Shaft with Spring Loaded Take-Up


Standard Duty Top Screens


Swing-Up Spinner Assembly with 18" Steel Spinner Disc


4 Spinner Baffles - 1)Fixed, 3) Adjustable


Painted Orange, All Options Painted Black


Have a 20" Poly Disc and Inverted V


CARBON STEEL BODY

Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all

stainless steel internal parts.

STAINLESS STEEL BODY

Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.

CONVEYOR

The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

PRO-FLO 900

pdf-button

  • icon
  • icon

PRO FLOW 900 STANDARD FEATURES

  1. Holds up to 720 lb of bagged or bulk deicing material
  2. Available mounts include Pivot Mount, 2" Receiver Hitch ( requires Adapter Mount) and 3 - point Hitch Mount. *Mounts sold separately
  3. Heavy duty horizontal auger built of solid powder coated steel for strength and performance
  4. 12" steel (PRO - FLO™ 900) spinners for a long, low maintenance life
  5. Steel rod top screen to break up chunks while loading for improved performance
  6. Molded polyethylene lid to protect material from elements
  7. Standard vibrating inverted V to break up clumps and ensure smooth material flow


PRO FLOW 900 SPECIFICATIONS

MODELPRO FLO 900
CAPACITY9.00 Cubic feet
HOPPER CONSTRUCTIONPolyethylene
DIMENSION OVERALL ( L x W x H)24" x 52" x 36"
APPROXIMATE WEIGHT (EMPTY)180 lb
ELECTRIC MOTORDual 12-volt 1/3 hp
AUGER (DIAMETER x LENGTH)3" x 20" (Heavy Duty Solid Steel)
SPINNER SIZE12"
SPREADING WIDTHUp to 40"
MATERIALSBagged Rock Salt, San, 50/50 Salt/Sand Mix
VEHICLE APPLICATIONTractors,1-Ton or Smaller Pickups
AVAILABLE MOUNTSPivot Mount, 2" Receiver Hitch (requires Adapter Mount), 3 - point Hitch Mount

For precise ice control performance, turn to the powerfully versatile PRO-FLO 525 Tailgate Spreaders. A 2-stage, auger-fed delivery system and independent variable speed control provide consistent and efficient flow of all types of de-icing materials, including rock salt and sand. Designed to attach to a wide variety of vehicles, it’s versatile enough for any job site or surface condition.

LOW-PRO 300W

 

pdf-button

  • icon
  • icon

LOW-PRO 300W STANDARD FEATURES

  1. Spreader Capacity - The maintenance free poly spreader holds up to 3 cubit feet of rock salt
  2. 12 Volt Electric Motor - Fully enclosed 12-volt electric motor and maximum torque transmission
  3. Easy on / off - Attaching and detaching the LOW - PRO 300W tailgate spreader is easy with a standard 7 - pin plug
  4. Spinner - A 10" corrosion free spinner ensures optimum delivery of ice melt and long life performance
  5. Vehicle Mounts - Comes standard with a 2" receiver mount. Additional mounts available include a drop utility, 3 point, trailer and utility mount


LOW-PRO 300W SPECIFICATIONS

MODELLOW-PRO 300W
CAPACITY3.00 cubic feet
HOPPER CONSTRUCTIONPolyethylene
DIMENSION OVERALL ( L x W x H)22" x 30" x 32"
APPROXIMATE WEIGHT (EMPTY)68 lb
Auger (Diameter x Length)2 1/2" x 5 3/4" (Vertical High Flow)
ELECTRIC MOTORDual 12-volt 1/3 hp
SPINNER SIZE10"
SPREADING WIDTHUp to 25"
MATERIALSSalt
VEHICLE APPLICATIONTractors,UTV,SUVs,1-Ton or Smaller Pickups
AVAILABLE MOUNTSStandard 2" Receiver. Optional Drop Utility, Trailer, Utility, 3 point Mounts

Mount up and Get Going! The WESTERN® LOW-PRO 300W wireless electric tailgate spreader delivers the ultimate in “plug ‘n’ play” convenience. Easy to mount on many vehicles without drilling or wiring, the LOW-PRO 300W tailgate spreader comes with a standard 2″ receiver hitch and a 7-pin plug, and a completely wireless key fob control! Available with mounts to fit pickup trucks, SUVs, utility vehicles and tractors.

OHV GAS ENGINE

 

pdf-button

  • icon
  • icon
  • icon

OHV GAS ENGINE CONVEYOR DELIVERY SPREADER STANDARD FEATURES

  1. Hopper - Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard
  2. Spinner - 14-gauge spinner chute assembly with three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch diameter with three welded fins. Spinner shaft of 3/4" diameter steel is mounted with sealed, self-aligning bearing
  3. Conveyor Drive - Briggs & Stratton Intek OHV air-cooled, single cylinder, four-cycle engine is mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred to the gear case through roller chain and sprockets
  4. Gear Case - The conveyor gear case has a cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants
  5. Conveyor - Heavy-duty, self-cleaning, heat-treated pintle chain with 24,000 lb. tensile strength. Two screw-type adjusters are provided to take up chain slack
  6. Easily adjustable deflectors allow customized spread patterns up to 25 ft. wide

OHV GAS ENGINE CONVEYOR DELIVERY SPREADER OPTIONS

    OPTIONAL EQUIPMENT

  • 2 Piece Hinged Hopper Screen
  • Adjustable Inverted "V"
  • Ratchet Strap Tie Downs
  • High Mount Brake Light



OHV GAS ENGINE SPREADER SPECIFICATIONS

MODEL825625
LEVEL CAPACITY1.80 Cubic Yards1.50 Cubic Yards
LENGTH115" Overall / 96" Hopper97" Overall / 78" Hopper
TOP WIDTH50.5"50.5"
MAX APPLICATION RATE7.3 cubic feet/minute7.3 cubic feet/minute
VIBRATORN/AN/A
REMOVABLE HOPPER COVER TARPOptional Optional
HOPPER SCREENSOptional Optional

Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft.spread pattern. And a big 1.50 or 1.80 yard capacity means you’ll spend your time productively, rather than constantly reloading.

TORNADO

 

pdf-button

  • icon
  • icon
  • icon

TORNADO STANDARD FEATURES

  1. Open Poly Hopper Covers protect the truck bed from material overflow during loading, Standard Top Screen breaks up large material chunks for better flow
  2. Center High Mounted Stop Light (CHMSL) is standard to meet FMVSS requirements
  3. Built in tie down loops for strapping unit to truck
  4. Chute housing includes molded alternate license plate area
  5. Includes an accessory wire for optional work light

TORNADO OPTIONS

    OPTIONS

  • Inverted Vee kit helps reduce start up loads on the drivetrain
  • Work Light Kit provides better night time visibility to rear of spreader
  • License Plate Light kit illuminates alternate license plate area
  • Vibrator kit helps remove stubborn materials



TORNADO SPREADER SPECIFICATIONS

MODEL7'8'9'
HOPPER CONSTRUCTIONPolyethylenePolyethylenePolyethylene
CAPACITY1.5 cubic yard1.8 cubic yard2.5 cubic yard
DIMENSIONS OVERALL (L x W x H)108" x 63" x 44"117" x 63" x 44"117" x 63" x 51"
APPROXIMATE WEIGHT (EMPTY)591 lb660 lb734 lb
MOTORDual ElectricDual ElectricDual Electric
SPINNER SIZE15 1/2"15 1/2"15 1/2"
CONVEYOR WIDTH16 1/2"16 1/2"16 1/2"
SPREADING WIDTHUp to 40"Up to 40"Up to 40"
MATERIALSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand Mix
VEHICLE APPLICATION3/4- & 1-Ton Pick-up Trucks3/4- & 1-Ton Pick-up TrucksDump Body or Flatbed Trucks (over 15,000 lb GVWR)

STRIKER

pdf-button

  • icon
  • icon
  • icon

STRIKER STANDARD FEATURES

  1. Stainless Steel Construction
  2. Dual Electric Motors
  3. Inverted V
  4. 16 1/2" Conveyor Width
  5. Top Screen
  6. Tie Down Ratchet Straps
  7. Dual Swing Chute Design
  8. Rear Dump Button
  9. *Rear Work Light Button*
  10. **Adjustable Drop Chute**
  11. *Only available on Electric Models - **Chute Extension required for 7 foot and 8 foot model

STRIKER OPTIONS

    OPTIONAL ACCESSORIES

  • License Plate Kit
  • Work Light Kit
  • Strobe Light
  • Vibrator Kit
  • Tie Down Chain Kit
  • 6" Side Extensions



STRIKER SPREADER SPECIFICATIONS

MODEL7' HOPPER SPREADERS8' HOPPER SPREADERS9' HOPPER SPREADERS9' HOPPER SPREADERS10' HOPPER SPREADERS10' HOPPER SPREADERS
BODY SIDE LENGTH7'8' 9'9'10' 10'
CAPACITY1.5 Cubic yard2.0 Cubic yard3.0 Cubic yard4.5 Cubic yard4.5 Cubic yard6.0 Cubic yard
Hopper Construction16 Gauge SS16 Gauge SS16 Gauge SS16 Gauge SS16 Gauge SS16 Gauge SS
DIMENSIONS OVERALL L X W X H84" x 50" x 38"96" x 50" x 40"108" x 50" 41"108" x 70" x 47"120" x 70" x 47"120" x 70" 54"
DUAL 12V DC SEALED MOTOR595 LB615 LB695 LB815 LB
GAS 10.5 HP I/C BRIGGS AND STRATTON740 LB820 LB940 LB965 LB1010 LB
GAS LL HP I/C HONDA740 LB820 LB940 LB965 LB1010 LB
DUAL HYDRAULIC MOTORS615 LB695 LB815 LB840 LB885 LB
CONVERYOR WIDTH16 1/2"16 1/2"16 1/2"16 1/2"16 1/2"16 1/2"
SPINNER SIZE15 1/2"15 1/2"15 1/2"15 1/2"15 1/2"15 1/2"
SPREADING WIDTHUp to 40"Up to 40"Up to 40"Up to 40"Up to 40"Up to 40"
MATERIALS Salt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand MixSalt, Sand, Salt/Sand Mix
VEHICLE APPLICATION3/4- & 1-Ton Pickup Trucks3/4- & 1-Ton Pickup TrucksDump Body or Flatbed Trucks (over 15,000 lb GVWR)Dump Body or Flatbed Trucks (over 15,000 lb GVWR)Dump Body or Flatbed Trucks (over 15,000 lb GVWR)Dump Body or Flatbed Trucks (over 15,000 lb GVWR)

Strike While the Pavement is Cold. Minimize waste and maximize profits with the new Striker™ Stainless Steel Hopper Spreader from WESTERN®. An innovative chute design delivers material to precise points on the 15 ½” poly spinner to cast it out and away from your truck, while the unique circular deflector shutter offers one-sided deployment, providing more targeted, more profitable spreading. Constructed for supreme durability and loaded with the latest in snow and ice control technology — raising the bar for commercial de-icing performance.

Under-Tailgate Spreader

 

pdf-button

  • icon
  • icon
  • icon

UNDER TAILGATE SPREADER STANDARD FEATURES

  1. One piece rigid body with end plates continuously welded to auger trough
  2. Adjustable height spinner assembly, pinned on to bottom door, with 18” poly spinner disc
  3. Hydraulic safety interlock system
  4. Two hydraulic motor operation - one at the auger and one at the spinner for independent variable speed control.

UNDER TAILGATE SPREADEROPTIONS

  • Special paint
  • Berm chute (standard on U996)
  • Light bars
  • Stainless steel - AS
  • Gearbox drive - GB
  • Center, left or right discharge
  • Sensored motor
  • Prewet boom



UNDERTAILGATE SPREADER SPECIFICATIONS

U-SERIES SPREADERU696-DDU996-DD
WEIGHT665 LBS760 LBS
END PLATES1/4 Carbon7 Gauge Stainless
AUGER CONFIGURATION1-6" Diameter x 4" Pitch1-9" diameter x 4" Pitch
LENGTH96"96"
HEIGHT(WITHOUT SPINNER)19"19"
HEIGHT(WITH SPINNER)35"35"
WIDTH(WITHOUT SPINNER)20.5"20.5"
WIDTH(WITH SPINNER)20.5"20.5"
SPINNER DIAMETER/MATERIAL18" Polyurethane 18" Polyurethane
TROUGH MATERIAL7 Gauge Formed7 Gauge Formed
AUGER DRIVEDirect DriveDirect Drive

The Under Tailgate Spreader from Bonnell Industries is the most rugged on the market today. Available in either carbon or stainless steel construction, and with direct drive or gearbox drive options, Bonnell Industries has the undertailgate spreader that fits your application. Safety, quality and durability– Bonnell Industries is the only name you need to know in snow and ice control.

Quick Mount Kit – Quickly mount and dismount your spreader by removing 4 pins (no bolts). Brackets are bolted to the spreader body for replacement and adjustment purposes.

Easy adjustment of the anti-flow plate without the use of tools.

 

Replacement-Tailgate Spreader

 

pdf-button

  • icon
  • icon
  • icon

REPLACEMENT TAILGATE SPREADER STANDARD FEATURES

  1. Full width agitator is driven by a roller chain off the auger shaft
  2. 3/16" bottom clean out door with a hydraulic safety interlock system
  3. Adjustable height hot dip galvanized spinner assembly, pin on to bottom door, with 18” poly spinner disc. Highest tailgate spreader spinner ground clearance available

REPLACEMENT TAILGATE SPREADEROPTIONS

  • Stainless steel
  • Pre-wet systems
  • Center, left, or right discharge
  • Special Paint
  • Dual motor drive in lieu of chain drive or agitator
  • Hot dip galvanized housing and door
  • Berm chute
  • Sensored motor
  • Hydro control valve
  • Hose kit(s)



REPLACEMENT TAILGATE SPREADER SPECIFICATIONS

MODELAUGERWIDTHHEIGHTR69699
R69-DD-84226"84"22.5"
R69-DD-84366"84"36"
R69-DD-84466"84"46"
R99-DD-84366"84"36"
R99-DD-84466"84"46"
SPINNER DIAMETER/MATERIAL18" Polyurethane18" Polyurethane
TROUGH MATERIAL3/16" Formed3/16" Formed
END PLATES1/4"1/4"
AUGER CONFIGURATION1 - 6" Diameter x 4" pitch1 - 9" Diameter x 4" pitch
AUGER DRIVEDirect driveDirect drive

Replacement Tailgate Spreaders from Bonnell Industries are designed to replace the existing tailgate, providing the highest spinner ground clearance possible. They are engineered for use with light, medium and heavy duty trucks. The hinged bottom cleanout door cannot be fully opened without disconnecting the hydraulic hoses providing the ultimate safety for your operator.

Our auger is driven by a direct drive hydraulic motor. Our full-width agitator is driven by a roller chain off the auger shaft. You can rely on the agitator and 6″ or 9” continuous-flited auger to ensure constant material flow. Both the R-161 and R-191 replacement tailgate spreader models fasten to existing dump body hardware for fast mounting and removal without the use of special tools.

Our standard polymer spinner disc eliminates the need to replace corroded steel fins. The adjustable spinner assembly remains parallel to the road at all dump box angles and can be easily removed by pulling two pins and uncoupling two quick-disconnect hoses.

BVA V-Box

 

pdf-button

  • icon
  • icon
  • icon

BVA-SERIES V-BOX SPREADERS STANDARD FEATURES

  1. 10 Gauge hopper sides, 7 gauge longsills, 7 gauge auger trough "CS" Carbon
  2. 12 Gauge hopper sides, 10 gauge longsills, 10 gauge auger trough "SS" Carbon
  3. Direct drive motor
  4. Side swing up spinner with 18" steel spinner disc
  5. 7” diameter hard surfaced auger with three pitch settings for even unloading, four bolt self-aligning ball bearing at front of auger, greasable from the rear of spreader
  6. Top screens

BVA-SERIES SPREADER OPTIONS

  • Hand crank winch for swing up spinner
  • Pre-wet systems
  • Mounting kits
  • Ladders
  • Cabshields
  • Catwalks
  • 12 gauge stainless steel V-box construction (optional 10-gauge stainless)
  • Wireless camera system
  • Engine over hydraulic systems
  • Rear diverted
  • Top mount spinner motor
  • 20" Poly spinner
  • Doghouse cutout for dump body hoist



BVA - SERIES SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
BVA-10-4810'48"84"5.62385 LBS
BVA-10-5410'54"84"6.92480 LBS
BVA-10-6010'60"84"8.32575 lbs
BVA-11-4811'48"96"6.22525 LBS
BVA-11-5411'54"96"7.62625 LBS
BVA-11-6011'60"96"9.02725 LBS
BVA-12-4812'48"108"6.82695 LBS
BVA-12-5412'54"108"8.42800 LBS
BVA-12-6012'60"108"9.92905 LBS
BVA-13-4813'48"96" C.T.7.32835 LBS
BVA-13-5413'54"96" C.T.9.02945 LBS
BVA-13-6013'60"96" C.T.10.73055 LBS
BVA-14-4814'48"108" C.T.7.93005 LBS
BVA-14-5414'54"108" C.T.9.73120 LBS
BVA-14-6014'60"108" C.T.11.63235 LBS
BVA-15-4815'48"120" C.T.8.43145 LBS
BVA-15-5415'54"120" C.T.10.33265 LBS
BVA-15-6015'60"120" C.T.12.23385 LBS
BVA-16-4816'48"132" C.T.8.93585 LBS
BVA-16-5416'54"132" C.T.10.93705 LBS
BVA-16-6016'60"132" C.T.13.03825 LBS

The Bonnell “BVA” Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

The Bonnell “BVA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BVA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through many winters to come.

CARBON STEEL BODY

Constructed of 10 gauge steel with 45º sloping sides with 10 gauge side supports for high resistance to twisting under heavy loads.

AUGER

7” Hard faced auger with direct drive.

SPINNER ASSEMBLY

Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENS

Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”

INVERTED V

Standard equipment with the purchase of BVA spreader.

GREASE EXTENSION

Grease extension to the rear-standard equipment.

BVDA Dual Auger V-Box

 

pdf-button

  • icon
  • icon
  • icon

BVDA-SERIES V-BOX SPREADERS STANDARD FEATURES

  1. 10 Gauge hopper sides, 7 gauge lonsills, 7 gauge auger trough ("CS" Carbon)
  2. 12 Gauge hopper sides, 10 gauge lonsills, 10 gauge auger trough ("SS" Carbon)
  3. Twin counter-rotating 7” diameter hard surfaced augers with three pitch settings for even unloading, two bolt self-aligning ball bearings at rear of auger
  4. Rear swing up spinner with 18" steel spinner disc
  5. Twin planetary drive system, protected at front of hopper
  6. Inverted V
  7. Galvanized top screens

BVDA-SERIES V-BOX SPREADERS OPTIONS

  • Poly light bar
  • 12 gauge stainless steel V-box construction (optional 10 gauge stainless)
  • Poly tanks
  • Hand crank winch for swing up spinner
  • Pre-wet systems
  • Leg stand kits
  • Lighting packages
  • Spill shields
  • Ladders
  • Doghouse cutout for dump body hoist
  • Mounting kits
  • Catwalks or fenders
  • Cabshield
  • Engine over hydraulic systems
  • 20" Poly spinner
  • Rear diverter chute
  • Rear planetary drive
  • Rear direct drive
  • Various spinner assemblies
  • Feed gate



BVDA - SERIES SPREADER SPECIFICATIONS

MODEL NUMBERV-BOX LENGTHV-BOX HEIGHTCAB TO AXLECUBIC YARD CAPACITYAPPROXIMATE WEIGHT
BVDA-10-4810'48"84"5.62685 LBS
BVDA-10-5410'54"84"6.92780 LBS
BVDA-10-6010'60"84"8.32875 lbs
BVDA-11-4811'48"96"6.22825 LBS
BVDA-11-5411'54"96"7.62925 LBS
BVDA-11-6011'60"96"9.03025 LBS
BVDA-12-4812'48"96"6.82995 LBS
BVDA-12-5412'54"96"8.43100 LBS
BVDA-12-6012'60"96"9.93205 LBS
BVDA-13-4813'48"96" C.T.7.33135 LBS
BVDA-13-5413'54"96" C.T.9.03245 LBS
BVDA-13-6013'60"96" C.T.10.73355 LBS
BVDA-14-4814'48"108" C.T.7.93305 LBS
BVDA-14-5414'54"108"" C.T.9.73420 LBS
BVDA-14-6014'60"108"" C.T.11.63535 LBS
BVDA-15-4815'48"120" C.T.8.43445 LBS
BVDA-15-5415'54"120" C.T.10.33565 LBS
BVDA-15-6015'60"120" C.T.12.23685 LBS
BVDA-16-4816'48"132" C.T.8.93585 LBS
BVDA-16-5416'54"132" C.T.10.93705 LBS
BVDA-16-6016'60"132" C.T.13.03,825 LBS

The Bonnell “BVDA” Dual Auger Bottom Series V-Box Spreader. Units are available in 9-15′ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

Bonnell has carried on another tradition by putting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

The Bonnell “BVDA” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

Optional equipment and upgrades also available. Call Bonnell today to order your BVDA Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through
many winters to come.