As the summer days start drawing in, and temperatures begin to cool off, it’s time to start thinking about winter preparations. Bonnell is here to make sure you’re not left out in the cold when the snow starts falling!
Continue reading Winter preparations start at the Bonnell showroom
Tag Archives: Plows
Tapered Utility Snow Plow
UTILITY TAPERED PLOW STANDARD FEATURES
- 3/8" Formed plate a-frame
- 3" x 3" x 1/4" tube front push frame
- (2) Single acting 2" x 10" reversing cylinders
- 1" Thick swivel skid shoes
- (6) Table to moldboard hook-up points with 3/4" pins
- 15" Extended overhang
- (8) 3/8" Ribs
UTILITY TAPERED PLOW SPECIFICATIONS
| MODEL NUMBER | 9TA2742M4 | 10TA2643M4 | 9TA2742T4 | 10TA2643T4 |
|---|---|---|---|---|
| CUTTING EDGE LENGTH | 9'0" | 10'0" | 9'0" | 10'0" |
| LEADING EDGE MOLDBOARD HEIGHT | 27" | 26" | 27" | 26" |
| DISCHARGE END MOLDBOARD HEIGHT | 42' | 43' | 42' | 43' |
| LEADING END OVERHANG | 12-1/2" | 12" | 12-1/2" | 12" |
| DISCHARGE END OVERHANG | 19-1/2" | 20" | 19-1/2" | 20" |
| CUTTING SWATH @ 30˚ | 7' 9-1/2" | 8'8" | 7' 9-1/2" | 8'8" |
| APPROXIMATE WEIGHT OF BASE UNIT | 1050 LBS | 1100 LBS | 1250 LBS | 1300 LBS |
* longer lengths available upon request
Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)
Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs
Moldboard Pitch15˚off vertical
Reversing Table:3" x 2" x 1/4" Structural Tubinge
Lower Reinforcing Angle:4" x 4" x 1/2" Angle
Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing
A-Frame:3/8" Steel Plate
Reversing Cylinders:2" x 10" Single Acting
Reversing Limits (left and right):30 degrees
Plow to Table Hinge Points:(6) Spanning 69" 3/4" PINS
Pivot Pin:1" Grade Five Bolt
Cylinder Pins:1" C1045 Steel Pins
Number of Trip Springs:(6) .400 Wire Extension Trip
Lift Chain:5/16" Hi-Test Chain
Plow to Table Hinge Points:(6) Spanning 69" 3/4" PINS
Pivot Pin:1" Grade Five Bolt
Cylinder Pins:1" C1045 Steel Pins
Number of Trip Springs:(6) .400 Wire Extension Trip
Lift Chain:5/16" Hi-Test Chain
Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.
Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.
Metropolitan Torsion Trip Edge
METROPOLITAN TORSION TRIP EDGE PLOW STANDARD FEATURES
- (2) Adjustable Pitch Setting
- 4"X 4" x 3/8" tube push frame spanning 90"
- (2) 1" X 2-1/2" trip connecting post fastened by 1-1/4" Bolts
- (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
- (4) 3/4" Square spring wire torsion - trip springs - independently replaceable, 7/8 optional
- Extended moldboard continuously welded
METROPOLITAN TORSION TRIP EDGE SPECIFICATIONS
| MODEL NUMBER | LENGTH | HEIGHT | CUTTING SWATH @ 35˚ | APPROXIMATE WEIGHT OF BASE UNIT | NUMBER OF SPRINGS |
|---|---|---|---|---|---|
| 10ST36TT7 | 10'0" | 36" | 8'2" | 1765 LBS | 4 |
| 11ST36TT7 | 11'0" | 36" | 9'0" | 1815 LBS | 4 |
| 12ST36TT7 | 12'0" | 36" | 9'10" | 1885 LBS | 4 |
| 10ST42TT7 | 10'0" | 42" | 8'2" | 1865 LBS | 4 |
| 11ST42TT7 | 11'0" | 42" | 9'0" | 1915 LBS | 4 |
| 12ST42TT7 | 12'0" | 42" | 9'10" | 1985 LBS | 4 |
| 10ST49TT7 | 10'0" | 49" | 8'2" | 1905 LBS | 4 |
| 11ST49TT7 | 11'0" | 49" | 9'0" | 1975 LBS | 4 |
| 12ST49TT7 | 12'0" | 49" | 9'10" | 2045 LBS | 4 |
* longer lengths available upon request
Moldboard Thickness:10 Gauge
Moldboard Reinforcing:(7)-1/2” x 3” Ribs
Adjustable Moldboard Pitch Setting25˚, 15˚ or 5˚ off vertical
Lower Reinforcing Angle:7" x 4" x 1/2" Fully Boxed with 3/8" x 6-3/4" Plate
Reversing Frame:5' x 3-1/2" x 1/2" Angle Iron Sector
Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting
Reversing Limits (left and right):0 to 35 degrees with Positive Stops
Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"
Cutting Edge:5/8" x 6" High Carbon Steel
Pivot Pin:1-1/4" Grade 8 Bolt
Cylinder Pins:1" C1045 Steel Pins
Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"
Cutting Edge:5/8" x 6" High Carbon Steel
Pivot Pin:1-1/4" Grade 8 Bolt
Cylinder Pins:1" C1045 Steel Pins
700 SERIES FULL TRIP PLOW
HINICKER 700 SERIES FULL TRIP PLOW STANDARD FEATURES
- Hydraulic scissors lift cuts transport bounce eliminates lift chain
- 6 vertical and 2 diagonal ribs provide strength and support
- Fully hydraulic lift and angling system
- 3/8" x 6" high carbon steel replaceable cutting edge
- Low maintenance poly moldboard surface reduces friction never needs painting. Optional rubber or polyethylene snow deflectors
- Fully moldboard trip system helps protect plow and truck
700 SERIES FULL TRIP PLOW SPECIFICATIONS
| MODEL | 702 | 752 |
|---|---|---|
| BLADE WIDTH | 7' (76" at full angle) | 7-1/2' (82' at full angle) |
| BLADE HEIGHT | 26" | 26" |
| MOLDBOARD SURFACE | 1/4" HMW Black Polyethylene | 1/4" HMW Black Polyethylene |
| CUTTING EDGE | 3/8" x 6" x 84" | 3/8" x 6" x 92" |
| WEIGHT (NET OF TRUCK MOUNTED BRACKETS AND WIRING) | 449 lb removable | 460 lb removable |
TRIP EDGE SCOOP PLOW
TRIP EDGE SCOOP PLOW STANDARD FEATURES
- Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
- 1/4 inch thick HMW low friction polyethylene moldboard never needs refinishing
- Hydraulic scissors lift cuts transport bounce eliminates chains
- Horizontal truss moldboard frame provides exceptional resistance to bending and bowing
- Cast iron skid shoes are standard equipment
- Simple, reliable torsion trip edge provides independent protection to each plow section
TRIP EDGE SCOOP PLOW SPECIFICATION
| MODEL | 6812 | 6912 |
|---|---|---|
| BLADE WIDTH | 8' | 9' |
| BLADE HEIGHT | 30" | 30" |
| MOLDBOARD SURFACE | 1/4" HMW Poly | 1/4" HMW Poly |
| VERTICAL RIBS | 6 | 8 |
| TORSION TRIP SPRINGS | 8 | 8 |
| POWER ANGLING RAMS | 1-1/2" x 10" | 1-1/2" x 10" |
| WEIGHT | 749 lb. | 803 lb. |
Outer end is angled forward50 degree in full left or right position, reducing high side spillage
Versatile and EfficientUnique concave scoop moldboard captures and moves snow also allows conventional angled plowing
High Clearance 3 Section Trip Edge 9 inch high pivot point provides maximum protection. Each section trips independently for smooth plowing with less stress on the plow
Easy to Use ControllerConvenient, compact fingertip control mounts anywhere or can be hand help. Optional Flexstand allows controls to be positioned right where you want them
Easy to Use ControllerConvenient, compact fingertip control mounts anywhere or can be hand help. Optional Flexstand allows controls to be positioned right where you want them
PRO PLOW SERIES 2
Pro Plow Series 2 STANDARD FEATURES
- Blade Shoes are Standard
- Trip Blade protection with Shock Absorber
- Rubber Snow Deflector
PRO PLOW SERIES 2 SPECIFICATIONS
| MODEL | PRO PLOW SERIS 2 | PRO PLOW SERIES 2 | PRO PLOW SERIES 2 | POLY PRO PLOW SERIES 2 | POLY PRO PLOW SERIES 2 |
|---|---|---|---|---|---|
| BLADE WIDTH | 7' 6" | 8' | 8' 6" | 7' 6" | 8' |
| BLADE HEIGHT | 29" | 29" | 29" | 29" | 29" |
| BLADE GAUGE | 11 | 11 | 11 | 3/8" POLY | 3/8" POLY |
| TRIP SPRINGS | 4 | 4 | 4 | 4 | 4 |
| SHOCK ABSORBER | 1 | 1 | 1 | 1 | 1 |
| VERTICAL RIBS | 7 | 7 | 7 | 7 | 7 |
| ANGLING RAMS | 1 -1/2" X 10" | 1 -1/2" X 10" | 1 -1/2" X 10" | 1 -1/2" X 10" | 1 -1/2" X 10" |
| PLOWING WIDTH (FULL ANGLE) | 6' 6" | 6' 11" | 7' 4" | 6' 6" | 6' 11" |
| APPROXIMATE WEIGHT (LESS MOUNT) | 653 LB | 668 LB | 686 LB | 677 LB | 690 LB |
| DISC SHOES | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| CUTTING EDGES | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" |
When it comes to your business, taking care of the customers is what it’s all about. Designed for the pros, the WESTERN® PRO-PLOW® has been one of the best-selling commercial straight-blade models for snow plow contractors since its introduction. When they’re counting on you, you can count on the PRO-PLOW.
PRO PLUS PLOW
PRO PLUS PLOW STANDARD FEATURES
- Skid Steer Mount Available
- Heavy Duty Cutting Edge
- Reinforced Plow Blades
- Trip Blade Protection with Shock Absorbers/li>
- A-Frame Construction
- High Strength Rectangular Tube Quadrant
- Pivot Point
- High Strength Steel Base Channel
PRO PLUS PLOW SPECIFICATIONS
| PRO PLUS PLOWS | |||
|---|---|---|---|
| BLADE HEIGHT | 8' | 8' 6" | 9' |
| BLADE GAUGE | 12 | 12 | 12 |
| TRIP SPRINGS | 4 | 4 | 4 |
| SHOCK ABSORBER | 2 | 2 | 2 |
| VERTICAL RIBS | 8 | 8 | 8 |
| ANGLING RAMS | 1 1/2" x 12" | 1 1/2" x 12" | 1 1/2" x 12" |
| PLOWING WIDTH (FULL ANGLE) | 6' 11" | 7' 4" | 7' 9" |
| APPROXIMATE WEIGHT (LESS MOUNT) | 805 lb | 821 lb | 837 lb |
| DISC SHOES | cast iron | cast iron | cast iron |
| CUTTING EDGES | 1/2" x 6" | 1/2" x 6" | 1/2" x 6" |
HTS PLOW
HTS PLOWSTANDARD FEATURES
- Reinforced Plow Blade - Six vertical ribs and horizontal POWER BAR provide structural reinforcement
- Trip Blade Protection - The two spring trip blade protects your plow and truck when they plow strikes an obstacle
- Hydraulic Scrape Lock - Hydraulically locks the blade down for enhanced scraping and clean back dragging performance
- One side hookup the simplified Ultra Mount® system is fast and easy
HTS PLOW SPECIFICATIONS
| HTS PLOW | |
|---|---|
| BLADE WIDTH | 7' 6" |
| BLADE HEIGHT | 27" |
| BLADE GAUGE | 14 |
| TRIP SPINGS | 2 |
| VERTICAL RIBS | 6 |
| ANGLING RAMS | 1/3" x 8' |
| PLOWING WIDTH (FULL ANGLE) | 6' 7" |
| APPROXIMATE WEIGHT (LESS MOUNT) | 423 lbs |
| DISC SHOES | optional |
| CUTTING EGE | 5/16" x 6" |
There’s no need for compromise with the WESTERN® HTS snowplow. This full-size, full-featured plow is the perfect fit for lighter half-ton, four-wheel-drive trucks. It’s 7’6″ wide straight blade handles personal and light commercial use with rugged, pro-like performance without the extra weight
HEAVY WEIGHT PLOW
HEAVYWEIGHT PLOW STANDARD FEATURES
- Heavy Duty Cutting Edge - 1/2" thick x 6" tall AASHO punched carbon steel cutting edge is standard
- Standard Adjustable Cast Iron Disc Shoes and Convenient Wheels - A standard set of wheels help maneuver the blade when attaching it to your truck or removing from the vehicle
- Trip Blade Protection with Shock Absorbers - Two shock absorbers and six trip return springs help protect the plow and truck when striking an obstacle
- UniMount® Mounting System - The mechanical attachment system quickly attaches and detaches
HEAVYWEIGHT PLOW SPECIFICATIONS
| BLADE WIDTH | 10' |
| BLADE HEIGHT | 33" |
| BLADE GAUGE | 7" |
| TRIP SPRING | 6 |
| SHOCK ABSORBERS | 2 |
| VERTICAL RIBS | 6 |
| ANGLING RAMS | 2" x 16" |
| PLOWING WIDTH (FULL ANGLE) | 8' 8" |
| APPROXIMATE WEIGHT (LESS MOUNT) | 1106 lb |
| DISC SHOES | Cast iron |
| CUTTING EDGE | 1/2" x 6" |
2000 FULL TRIP PLOW
2000 FULL TRIP PLOW STANDARD FEATURES
- Super-bright quad halogen headlights
- Externally mounted pump simplifies installation, comes off the truck with the plow
- Heavy-duty box section plow frame resists twisting & bending
- Hydraulic scissors lift cuts transport bounce, eliminates chains
- Entire moldboard trips with soft-return compression springs
- 30" tall, high curve blade rolls snow off quickly
- Optional molded poly, rubber, or spring-loaded rubber (shown) snow deflectors
- Robotic blade & frame welds assure uniform quality
HINIKER CONVENTIONAL 2000 SERIES FULL TRIP PLOW SPECIFICATIONS
| MODEL | 2753 | 2803 | 2853 |
|---|---|---|---|
| BLADE WIDTH | 7-1/2' | 8' | 8-1/2' |
| BLADE HEIGHT | 30" | 30" | 30" |
| GAUGE OF STEEL | 12GA | 12GA | 12GA |
| VERTICAL RIBS | 6 | 6 | 6 |
| COMPRESSION TRIP SPRINGS | 2 | 2 | 2 |
| PLOW WIDTH @ 31° ANGLE | 77" | 82" | 87" |
| CUTTING EDGE (HIGH CARBON 1084 STEEL) | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" |
| POWER ANGLING RAMS | 1 -1/2" x 10" | 1 -1/2" x 10" | 1 -1/2" x 10" |
| WEIGHT (NET OF TRUCK MOUNTED HARDWARE) | 602 lbs | 614 lbs | 649 lbs |
Take a professional approach to snow removal! Hiniker 2000 Series full-trip snowplows use box section frames and heavily reinforced moldboards for strength and durability. 30 inch tall high-curve moldboards move heavy snowfalls quickly. Our hydraulic scissors lift reduces transport bounce and bang. Convenient compact joystick controls can be mounted anywhere or held in the palm of your hand. And the Hiniker Quick-Hitch mounting system is one system that truly lives up to its name. Count on Hiniker’s proven performance—the professionals choice!
PRODIGY PLOW
PRODIGY PLOW STANDARD FEATURES
- Fully Mechanical Wings - Automatically change position as you maneuver the blade, to maximize plowing efficiency
- Reinforced Blade Structure - Eight vertical ribs and horizontal POWER BAR provide added reinforcement and strength
- Trip Blade and Wing Protection - Four heavy duty coil springs help absorb shock when striking objects. Coil compression springs automatically return wings to their scoop position
- Mechanically pin wings - For 9 foot 8 inches straight blade operation or back dragging
- Skid-Steer Mount Available - Hooks up fast and easy. Skid-steer hydraulics power the blades
WESTERN PRODIGY SPECIFICATIONS
| Western Prodigy | |
|---|---|
| BLADE WIDTH | 8' 7" scoop 9' 8" wings pinned |
| BLADE HEIGHT | 29 1/2" |
| BLADE GAUGE | 12 |
| TRIP SPRINGS | 4 |
| SHOCK ABSORBER | Optional |
| VERTICAL RIBS | 8 |
| ANGLING RAMS | 1 - 1/2" x 10" |
| PLOWING WIDTH ( FULL ANGLE) | 7' 10" full angle 8' 7" scoop |
| APPROXIMATE WEIGHT (LESS MOUNT) | 880 lb |
| DISC SHOES | optional |
| CUTTING EDGE | 1/2" x 6" |
The PRODIGY snowplow features an ingenious patented mechanical wing design that automatically positions its wings to deliver maximum plowing efficiency. Whether in straight ahead scoop mode or angled for windrowing, it delivers multi position winged plow productivity in a unit that’s as easy to operate as a straight blade.
MVP 3 PLOW
MVP 3 PLOW STANDARD FEATURES
- Flared Wings - Wings soar from 31" center height up to 39" at outer edge on 9 foot 6" models
- Reinforced Blade Structure -Eight vertical ribs and horizontal POWER BAR across the entire back of the blade provides structural rigidity
- DUAL TRIP EDGE - Independent trip edge protection in all blade configurations keep snow in front of the blade
- UltraLock Double Acting Cylinders - This standard feature allows clean back dragging. Plus the wings lock together for efficient straight blade operation
- Massive Center Pin and Hinge - 1-1/4" heat treated steel pin and hing with three connection points provide added strength
- Steel Snow Control Deflector - Steel cover over center hinge and formed cutting edges reduce snow leakage in all blade positions
- Bigger Lift Arm - 1-3/4" diameter cylinder for more lifting power
- T-Frame Design - T - Frame provides added strength and allows blade pitch adjustment to reduce uneven cutting edge wear
WESTERN MVP3 SPECIFICATIONS
| MODEL | MVP 3 SS OR PC | MVP 3 SS OR PC | MVP 3 SS OR PC | MVP 3 POLY | MVP 3 POLY |
|---|---|---|---|---|---|
| BLADE WIDTH | 7' 6" | 8' 6" | 9' 6" | 8' 6" | 9' 6" |
| BLADE HEIGHT | 37" at end 31" at hinge | 38" at end 31" at hinge | 39" at end 31" at hinge | 38" at end 31" at hinge | 39" at end 31" at hinge |
| BLADE GAUGE | 14 | 14 | 14 | 1/4" poly | 1/4" poly |
| TRIP SPRINGS | 4 | 4 | 4 | 4 | 4 |
| VERTICAL RIBS | 6 | 8 | 8 | 8 | 8 |
| ANGLING RAMS | 1-3/4" x 11" | 1-3/4" x 11" | 1-3/4" x 11" | 1-3/4" x 11" | 1-3/4" x 11" |
| PLOWING WIDTH ( FULL ANGLE) | 6' 7" full angle 6' 4" scoop 6' 10" full | 7' 5" full angle 7' 2" scoop 7' 8" full V | 8' 6" full angle 8' 2" scoop 8' 7" full V | 7' 5" full angle 7' 2" scoop 7' 8" full V | 8' 6" full angle 8' 2" scoop 8' 7" full V |
| APPROXIMATE WEIGHT (LESS MOUNT) | 885 lb | 940 lb | 1022 lb | 890 lb | 972 lb |
| DISC SHOES | optional | optional | optional | optional | optional |
| CUTTING EDGE | 3/8" x 6" | 3/8" x 6" | 1/2" x 6" | 3/8" x 6" | 1/2" x 6" |
**PC = POWER COATED STEEL SS = STAINLESS STEEL**
The WESTERN MVP 3 snowplow provides a whole new slant on V-plow performance and durability. Ultra fast hydraulics deliver maximum plow efficiency. Abd the trip edge design provides protection in all blade configurations, getting you over obstacles without losing your load. Standard UltraLock double acting cylinders hold the wings firmly in place for clean back dragging. MVP 3 is available in poly 8′ 6: and 9′ 6″ widths, and in powder coated steel and stainless steel in 7′ 6″, 8′ 6″ and 9′ 6″.
1,032 SERIES PLOW
10 FOOT TRIP EDGE PLOW 1032 SERIES STANDARD FEATURES
- Fourteen laser cut ribs strengthen the moldboard frame
- Trouble free compression type trip springs
- "No Pinch" pivot prevents stones, ice or other debris from jamming the trip edge. This allows for the full return of the trip edge every time
- Cast iron Skid shoes are standard equipment
- Horizontal truss moldboard frame provides exceptional resistance to bending and bowing
- Hydraulic scissors lift cuts transport bounce eliminates chains
10 FOOT TRIP EDGE PLOW EQUIPMENT
| MODEL | 10331 |
|---|---|
| BLADE WIDTH | 10' |
| BLADE HEIGHT | 32" |
| VERTICAL RIBS | 14 |
| COMPRESSION TRIP SPRINGS | 6 |
| PLOW WIDTH @ 30° ANGLE | 103" |
| CUTTING EDGE (HIGH CARBON 1084 STEEL) | 1/2" x 8" |
| TRIP HEIGHT | 9.75 |
| PLOW WEIGHT (LBS)* | 938 LBS (electric/hydraulic) |
**Weight net of truck mounted hardware**
32" Tall High-Capacity Moldboard
Corrosion Free, Dent Resistant Black HDPE Polyethylene Surface
14 Rib Welded Moldboard Frame
Inch Cutting Edge - 1/2 inch Thick
Plow Mounted Electric/Hydraulic or Central Hydraulic Configurations
Inch Cutting Edge - 1/2 inch Thick
Plow Mounted Electric/Hydraulic or Central Hydraulic Configurations
9200 SERIES PLOW
9200 SERIES PLOW STANDARD FEATURES
- Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
- Moldboards flare out from 30" high at center at 37" 8-1/2 foot plows or 36" 9-1/2 foot plows. The high curve density polyethylene moldboards are dent free and corrosion free
- High clearance trip edges operate independently of one another, reducing stress and twisting forces on the plow.
- 6" high-carbon steel replaceable cutting edge.
- Pinch free pivot point is 9 inches above the surface providing protection from higher obstacles such as curbs and parking barriers.
- Hinkers pitch adjustment levels the blade to assure full ground contact for optimum cleaning efficiency
- 12 laser cut steel ribs add exceptional strength
- Long lasting cast ductile iron skid shoes
TRIP EDGE SCOOP PLOW SPECIFICATION
| MODEL | 6812 | 6912 |
|---|---|---|
| BLADE WIDTH | 8' | 9' |
| BLADE HEIGHT | 30" | 30" |
| MOLDBOARD SURFACE | 1/4" HMW Poly | 1/4" HMW Poly |
| VERTICAL RIBS | 6 | 8 |
| TORSION TRIP SPRINGS | 8 | 8 |
| POWER ANGLING RAMS | 1-1/2" x 10" | 1-1/2" x 10" |
| WEIGHT | 749 lb. | 803 lb. |
Outer end is angled forward50 degree in full left or right position, reducing high side spillage
Versatile and EfficientUnique concave scoop moldboard captures and moves snow also allows conventional angled plowing
High Clearance 3 Section Trip Edge 9 inch high pivot point provides maximum protection. Each section trips independently for smooth plowing with less stress on the plow
Easy to Use ControllerConvenient, compact fingertip control mounts anywhere or can be hand help. Optional Flexstand allows controls to be positioned right where you want them
Easy to Use ControllerConvenient, compact fingertip control mounts anywhere or can be hand help. Optional Flexstand allows controls to be positioned right where you want them
8000 SERIES PLOW
8000 SERIES PLOW STANDARD FEATURES
- 30 inch tall, high curve, high-density polyethylene moldboards are dent resistant and corrosion free. Snow flows easily for more efficient plowing
- Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
- Pinch free pivot point is 9 inches above the surface providing protection from higher obstacles such as curbs and parking barriers
- The high tensile steel superstructure of the moldboard provides exceptional resistance to bending and bowing, for extra heave duty applications. 10 laser cut steel ribs add exceptional strength
- Long lasting cast ductile iron skid shoes
800 SERIES C-PLOW SPECIFICATIONS
| MODEL | 8802 | 8902 |
|---|---|---|
| BLADE WIDTH | 8' | 9' |
| BLADE HEIGHT | 30" | 30" |
| MOLDBOARD SURFACE | 1/4" HMW POLY | 1/4" HMW POLY |
| VERTICAL RIBS | 10 | 10 |
| COMPRESSION TRIP SPRINGS | 4 | 4 |
| PLOW WIDTH @ 30° ANGLE | 83" | 93" |
| TOP CUTTING EDGE (HIGH CARBON 1084 STEEL) | 1/4" x 4" | 1/4" x 4" |
| LOWER CUTTING EDGE (HIGH CARBON 1084 STEEL) | 3/8" x 6" | 3/8" x 6" |
| TRIP HEIGHT | 9" | 9" |
| PLOW WEIGHT | 800 lbs | 835 lbs |
The Hiniker 8000 Series C-Plow snowplow offers all of the heavy-duty performance of a conventional plow plus the added versatility of a high-performance backdrag
plow. Plow loading docks, residential driveways, and congested parking areas faster than ever. The patentedHiniker C-Plow blade actually converts from a conventional plow into a backdrag plow with the push of a button, letting you remove snow quickly and easily from garage aprons, curbs, loading docks, and tight corners. Then touch a button again to flip the blade upright and push the snow away