Tag Archives: Plow Accessories

Level Raise System

 

pdf-button

  • icon
  • icon

Level Raise System STANDARD FEATURES

  1. Can be set in any of 3 sets of holes enabling different degrees of leveling capability, increasing the workability with different types of hitch/lift arm combinations
  2. High Country Series
  3. Metropolitan Series
  4. Utility Series
  5. By shifting the positions of the chain hookup points on the plow using the Level Raise Lift System™, the table pin-up points and moldboard cutting edge remain parallel to the ground.(Top to Bottom Reversed to Right, Bulldoze, and Reversed to Left)

BAT WING EXTENSIONS

 

pdf-button

  • icon
  • icon

BAT WING SNOW PLOW STANDARD FEATURES

  1. Fold back wings for easy road transport
  2. Easy pin removal to convert to conventional plow
  3. Up to 18


BAT WING PLOW SPECIFICATIONS

BASE PLOWEXTENSION WIDTHTOTAL WIDTH
10'24"14"
11"24" - 30"15' - 16'
12'24" - 36"16' - 18'

* Not available with ALL PLOWS


Call factory with your needs for a complete design consultation


POLAR FLEX BLADES

 

pdf-button

  • icon
  • icon

POLAR FLEX BLADES STANDARD FEATURES

  1. CLASSIC MOUNT SERIES I - Heavy duty, one piece welded construction with a robust and rigid design
  2. FRONT MOUNT SERIES II - Less weight/lower height, easier segment changes, ideal for reversible plows and wings
  3. DIRECT MOUNT SERIES III - Doesn’t raise the moldboard height, and keeps the cost down on replacement parts because the mounting is built into the plow
  4. CLASSIC (SERIES I) - Flex elements and wear segments can be easily separated for environmentally safe recycling, a unique Polar FlexTM feature. Custom size configurations available on request, nose pieces & various styles of curb runners are available for both configurations Heat treated parts are warranted against breakage throughout the usable life of the part
  5. FRONT MOUNT (SERIES II) and DIRECT MOUNT (SERIES III) - Individual 12 inch carbide tipped steel segments are mounted using a patented system of reusable synthetic rubber flexible elements. This mounting technique significantly reduces vibration while simultaneously allowing the cutting edge to conform to the surface of the road. These two capabilities allow the system to clean the road better (less salt, fewer trips, safer roads) and reduce chatter (longer blade life, less plow maintenance, reduced operator fatigue)
  6. 7" x 4" x 1/2" Fully Boxed Bottom Angle


SPECIFICATIONS

MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHLEADING END HEIGHTDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGSCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
OF BASE UNIT
10TA2848MX110'0"11'28"
48"14"68'2"2069 lbs.
11TA2749MX111'0"
12'
27"
49"15"69'0"2136 lbs.
12TA2650MX112'0"13'
26"
50"16"69'9"2123 lbs.
10TA3252MX110'0"12'
32"52"16"68'2"2109 lbs.
11TA3153MX111'0"13'
31"53"17"69'0"2179 lbs.
12TA3054MX112'0"14'
30"54"19"69'9"2258 lbs.
14TA3861MX110'0"12'
39"60"18"68'2"2192 lbs.
11TA3861MX111'0"13'
38"61"19"69'0"2267 lbs.
12TA3762MX112'0"14'
37"62"20"69'9"2351 lbs.
12TA272MX112'0"14'
42"72"20"69'9"2351 lbs.

* longer lengths available upon request



Moldboard Thickness: 10 Gauge


Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


Lower Reinforcing Angle: 7" x 4" x 1/2"


Reversing Frame: 5" x 3/8" Wall Front Push Tube


Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


Reversing Limits (left & right): 0 to 35 degrees


Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


Pivot Pin: 1 - 1/2" Grade 8 Bolt


Cylinder Pins: 1 - 1/4" C1045 Steel Pins


Rubber Tire Assembly

 

pdf-button

  • icon
  • icon

Rubber Tire Assembly STANDARD FEATURES

  1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
  2. Greasable hub bearing on wheel assemblies
  3. Exclusive Spin-Easy crank handle


RUBBER TIRE ASSEMBLY SPECIFICATIONS

PART NUMBERMOUNT TYPEWHEEL TYPETIRE SIZE/TYPEAXLE SIZESCREW SIZEOUTER HOUSINGINNER POST
BON-002600TOP MOUNTPNEUMATIC5.70-8, 8 PLY
1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
BON-002600-FFTOP MOUNT
FOAM FILLED
5.00-8, 10 PLY FORK LIFT
1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
BON-001335FACE MOUNTPNEUMATIC
5.70-8, 8 PLY
1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE
BON-001335-FFFACE MOUNTFOAM FILLED
5.00-8, 10 PLY FORK LIFT1-1/4"1-1/4 ACME, GREASABLE3-1/2" SQUARE3" SQUARE

Rubber tire assemblies feature either 5.70 X 8.0 Pneumatic tires or foam filled tires on a heavy-duty cast hub. These tires are offered on a swivel arrangement, allowing the tire to trail in the direction of travel. These assemblies do not caster 360°.

Mushroom Shoe Assembly

 

pdf-button

  • icon
  • icon

Mushroom Shoe Assembly STANDARD FEATURES

  1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
  2. Greasable hub bearing on wheel assemblies
  3. Exclusive Spin-Easy crank handle


MUSHROOM SHOE ASSEMBLY SPECIFICATIONS

PART NUMBERFITS BRANDAPPLICATIONSHOE SIZESHOE TYPESCREW SIZEOUTER HOUSINGINNER POST
BON-001325BONNELLANY PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, ANGLED1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
BON-001325.5BONNELLFIXED ANGLE/V PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, SQUARE1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
BON-001328BONNELLANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
BON-001328MMONROE, GLEDHILL, HENKEANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1" ACME, GREASABLE2-1/2" SQUARE2" SQUARE
BON-001326BONNELLANY PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, ANGLED1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
BON-001326.5BONNELLFIXED ANGLE/V PLOW8.5" X 15" X 1.25" THICKRECTANGULAR, SQUARE1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
BON-001329BONNELLANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE
BON-001329MMONROE, GLEDHILL, HENKEANY PLOW10" DIA. X 2" THICKROUND MUSHROOM, BOLTS FROM BOTTOM1-1/4" ACME, GREASABLE3" SQUARE2-1/2" SQUARE

This shoe assembly features a heavy-duty cast ductile shoe which gets its name from its inverted mushroom-type shape. The telescopic assembly is Offered in both standard (2”post) or heavy-duty (2-1/2” post) versions.

HD Even Wear Shoe Assembly

 

pdf-button

  • icon
  • icon

HD Even Wear Shoe Assembly STANDARD FEATURES

  1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
  2. Greasable hub bearing on wheel assemblies
  3. Exclusive Spin-Easy crank handle


HD EVEN WEAR SHOES ASSEMBLY SPECIFICATIONS

PART NUMBERFITS BRANDSHOE SIZESHOE TYPESCREW SIZEOUTER HOUSINGINNER POST
BON-003274BONNELL12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, HARDENED1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE
BON-003274-CARBBONNELL12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, CARBIDE INSERT1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE
BON-003267FFLINK12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, HARDENED1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE
BON-003267HHENDERSON12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, HARDENED1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE
BON-003267MMONROE, HENKE, GLEDHILL12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, HARDENED1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE
BON-003274-NPNO MOUNT12" DIA. X 2" THICK, BOLTS INSERT FROM TOPBALL SWIVEL, HARDENED1-1/4" ACME, GREASEABLE3-1/2" SQUARE3" SQUARE

These bonnell even wear shoe assemblies feature a ball and socket type design which allows the shoe to pivot and rotate about the center of the ball. Because of these allowed motions, the shoe will follow the changing contour of the road, and wear much more evenly than conventional shoes, thus prolonging the life of the shoe. Tired of losing shoes because the bolts fall out? The top bolt design feature on the even wear Allows a full 2” of shoe wear Without wearing into the Bolt heads.

10 inch Kingpinless Steel Wheel Casters

 

pdf-button

  • icon
  • icon

10 INCH KINGPINLESS STEEL WHEEL CASTERS STANDARD FEATURES

  1. 1-1/4" Diameter ACME threaded screw assemblies (except Standard Duty Mushroom Assemblies)
  2. Greasable hub bearing on wheel assemblies
  3. Exclusive Spin-Easy crank handle


10 INCH KINGPINLESS STEEL WHEEL CASTERS SPECIFICATIONS

PART NUMBERMOUNT TYPEWHEEL TYPESWIVEL TYPEAXLE SIZESCREW SIZEOUTER HOUSINGINNER POST
BON-003239FACE MOUNT10' STEEL6" DIAMETER "KINGPINLESS" BALL BEARING RACE DESIGN1-3/16"1-1/4 ACME, GREASABLE4" SQUARE3-1/2" SQUARE

Steel casters have proven themselves as one of the most durable and reliable running gears on the market today. The Bonnell steel caster assemblies feature a greaseless, kingpinless swivel assembly which can withstand loads of up to 20,000 lb. They also feature a heavy-duty telescoping height adjustment consisting of an outer housing constructed of 3-1/2” square structural tubing. These running gears will withstand years of the severe conditions encountered when plowing snow.

Curb Shoes

 

pdf-button

  • icon
  • icon

Curb Shoes STANDARD FEATURES

  1. HEAVY DUTY WRAP AROUND - Fits both left and right sides and comes in a 1” x 6” or 1” x 8” configuration
  2. REVERSIBLE WRAP AROUND - Fits both left and right sides and comes in a 3/4” x 6” or 3/4” x 8” configuration
  3. REVERSIBLE BULL NOSE - Fits both left and right sides and comes in a 3/4” x 6” or 3/4” x 8” configuration


CURB SHOES SPECIFICATIONS

PART NUMBERAPPLICATIONSTYLETHICKNESSHEIGHTMTG HOLESREVERSIBLE
BON-003230SCRAPERBULL NOSE5/8"6"2YES
BON-003195SCRAPERBULL NOSE5/8"6"2YES
BON-003250PLOW/WING HEELBULL NOSE5/8"6"2YES
BON-003231PLOW/WING HEELBULL NOSE5/8"6"2YES
BON-003231.5PLOW/WING HEELBULL NOSE5/8"6"3YES
BON-003233.6PLOW/WING HEELWRAP AROUND3/4"6"2YES
BON-003234.3WING TOEWRAP AROUND3/4"6"2RH
BON-003234.3-LHWING TOEWRAP AROUND3/4"6"2LH
BON-003126LPLOWWRAP AROUND1"6"3LH
BON-003126RPLOW/WING HEELWRAP AROUND1"6"3RH
BON-003132RPLOW/WING HEELBULL NOSE1"6"3RH
BON-003132LPLOWBULL NOSE1"6"3LH
BON-003133RPLOW/WING HEEL/CARBIDE BLADEBULL NOSE1"6"3RH
BON-003133LPLOW/CARBIDE BLADEBULL NOSE1"6"3LH
BON-003175RPLOW/WING HEELWRAP AROUND1"6"3RH
BON-003175LPLOWWRAP AROUND1"6"3LH
BON-003176RPLOW/WING HEELWRAP AROUND1"6"3RH
BON-003176LPLOWWRAP AROUND1"6"3LH
BON-003125PLOWSTRAIGHT1"6"4YES
BON-003111PLOWSTRAIGHT1"6"4YES
BON-003112PLOW/CARBIDE BLADESTRAIGHT1"6"4YES
BON-003269PLOW/WING HEELBULL NOSE5/8"8"2YES
BON-003269.5PLOW/WING HEELBULL NOSE5/8"8"3YES
BON-003194PLOW/WING HEELBULL NOSE5/8"8"3YES
BON-003235.6PLOW/WING HEELWRAP AROUND3/4"8"2YES
BON-003128LPLOWWRAP AROUND1"8"3LH
BON-003128RPLOW/WING HEELWRAP AROUND1"8"3RH
BON-003134RPLOW/WING HEELBULL NOSE1"8"3RH
BON-003134LPLOWBULL NOSE1"8"3LH
BON-003177RPLOW/WING HEELWRAP AROUND1"8"3RH
BON-003177LPLOWWRAP AROUND1"8"3LH
BON-003178RPLOW/WING HEELWRAP AROUND1"8"3RH
BON-003178LPLOWWRAP AROUND1"8"3LH
BON-003127PLOWSTRAIGHT1"8"4YES
BON-003113PLOWSTRAIGHT1"8"4YES

Our New Curb Shoe are engineered with the same quality and durability you’ve come to expect from Bonnell Industries. Our standard heavy duty curb shoes are built to last. Add our Carbide Infusion Technology with Chromium Carbide Weld or Chromium Carbide Weld with embedded Tungsten Carbide and extend the life of the curb shoes even further.