Tag Archives: Ferri Mowers

TFC-DT/F Series

The Ferri Mower TFC-DT/F Series Forestry Mulchers are for rotor tractors with fixed flails. Suitable for green areas and uncultivated vegetation up to 40cm.

Product Image Cutting Width Tractor Power Max. Cutting Width Total Width Weight Rotor Diameter Total Rotor Diameter
TFC-DT/F 2000 6′ 6″ 120 / 150 HP 1000 RPM 16″ 7′ 10″ 4123lbs 0′ 11″ 1′ 8″
TFC-DT/F 2200 7′ 3″ 140 / 180 HP 1000 RPM 16″ 8′ 6″ 4585lbs 0′ 11″ 1′ 8″

TSKID

Flail head for skid steer loaders.

Product Image Equipped With:
TSKID Unidirectional motor (with drainage), parallell linkage for better floating on uneven grounds, linkage (SAE J2513) with self-levelling device, mechanical side shift, anti-shock and anticavitation valve, steel adjusting valve complete with pipes, ‘overlap’ rotor, hydraulic pipes and connections protected by spiral, belts transmission, adjustable skids with replaceable wear proof plates, rear adjustable roller, counterblade, rubber and abrasion resistant guard.
*Option: Side shift with hydraulic cylinder complete with pipes.

TFC/F Series

The Ferri Mower TFC/F Series Forestry Mulchers are for tractors with fixed flails. Suitable for green areas and uncultivated vegetation up to 25cm.

Product Image Cutting Width Tractor Power Max. Cutting Width Total Width Weight Rotor Diameter Total Rotor Diameter
TFC/F 2000 6′ 6″ 120 / 130 HP 1000 RPM 10″ 7′ 3″ 3682lbs 0′ 11″ 1′ 8″
TFC/F 2200 7′ 3″ 120 / 140 HP 1000 RPM 10″ 7′ 10″ 3990lbs 0′ 11″ 1′ 8″

TFC-DT/R Series

The Ferri Mower TFC-DT/R Series Forestry Mulchers are for double transmission rotor tractors with forged hammers. Suitable for green areas and uncultivated vegetation up to 30cm.

Product Image Cutting Width Tractor Power Max. Cutting Width Total Width Weight Rotor Diameter Total Rotor Diameter
TFC-DT/R 2000 6′ 6″ 120 / 150 HP 1000 RPM 12″ 7′ 10″ 3792lbs 1′ 4″ 1′ 8″
TFC-DT/R 2200 7′ 3″ 140 / 180 HP 1000 RPM 12″ 8′ 6″ 4256lbs 1′ 4″ 1′ 8″

TFC/R Series

The Ferri Mower TFC/R Series Forestry Mulchers are for tractors with rotor forged hammers and are suitable for green areas and uncultivated vegetation up to 20cm.

Product Image Cutting Width Tractor Power Max. Cutting Width Total Width Weight Rotor Diameter Total Rotor Diameter
TFC/R 2000 6′ 6″ 100 / 120 HP 1000 RPM 8″ 7′ 3″ 3351lbs 1′ 4″ 1′ 8″
TFC/R 2200 7′ 3″ 120 / 140 HP 1000 RPM 8″ 7′ 10″ 3660lbs 1′ 4″ 1′ 8″

ZHE Series

The Ferri Mower ZHE Series are offset-inline slope mowers that work behind and on the side of the tractor on flat or sloping surfaces. perfect for green area specialists with high productivity and long reliability.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max. Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZHE 2500 8′ 2″ 100 / 60 HP 8818lbs 7′ 5″ 12″ 60 / 90 2992lbs 2″

ZLE Series

The Ferri Mower ZLE Series are offset in-line slope mowers that work behind and on the side of the tractor on flat or sloping surfaces. World known for safety, reliability and high quality. The right mower for green area specialists.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max. Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZLE 1600 5′ 3″ 50 / 100 HP 5291lbs 5′ 10″ 9′ 2″ 60 / 90 1466lbs 1 3/4″
ZLE 1800 5′ 11″ 60 / 100 HP 5732lbs 6′ 6″ 9′ 10″ 60 / 90 1532lbs 1 3/4″
ZLE 2000 6′ 7″ 70 / 100 HP 6173lbs 7′ 2″ 10′ 6″ 60 / 90 1590lbs 1 3/4″

ZTE Series

The Ferri Mower ZTE Series are offset in-line slope mowers that work behind and on the side of the tractor on flat or sloping surfaces. World known for safety, reliability and high quality. Perfectly suited for all farmer needs.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max. Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZTE 2300 7′ 5″ 70 / 80 HP 6170lbs 7′ 3″ 10′ 9″ 50 / 90 1444lbs 1 3/4″

ZMTE Series

The Ferri Mower ZMTE Series are slope mowers that work behind and on the side of the tractor, on flat or sloping surfaces. World known for safety, reliability and high quality, they perfectly suit all farmer expectations.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max. Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZMTE 1600 5′ 5″ 50 / 80 HP 4900lbs 5′ 11″ 9′ 2″ 45 / 90 1034lbs 1 3/4″
ZMTE 1800 6′ 60 / 80 HP 5400lbs 9′ 10″ 45 / 90 1239lbs 1 3/4″
ZMTE 2000 6′ 9″ 70 / 80 HP 5800lbs 7′ 3″ 10′ 6″ 45 / 90 1290lbs 1 3/4″

ZMLE Series

The Ferri Mower ZMLE Series are offset/in-line slope mowers with an innovative and patented design that places the flail head axially with respect to the tractor, even if the gearbox is external to the transmission. This utilizes a three-point headstock attachment with a double linkage. One machine is able to perform the work which usually requires two slope mowers – you have a bigger offset, and at the same time, with a simple manual operation, you can set the flail head rear and centrally operate along rows.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max. Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZMLE 1400 4′ 8″ 40 / 70 HP 2886lbs 5′ 11″ 7′ 10″ 48 / 90 961lbs 1 3/4″
ZMLE 1600 5′ 4″ 40 / 70 HP 3086lbs 7′ 3″ 8′ 6″ 48 / 90 1005lbs 1 3/4″

ZME Series

The Ferri Mower ZME Series are offset in-line slope mowers that work behind and alongside the tractor on flat or sloping surfaces. Suitable for small tractors for agricultural and green areas.

Product Image Cutting Width Tractor Power Min. Tractor Weight Min. Tractor Width Max Sidesliding Flail Head Angle (Degrees) Weight Max. Cutting Width
ZME 125 4′ 1″ 18 / 30 HP 1555lbs 3′ 7″ 5′ 9″ 50 / 90 511lbs 1″
ZME 155 5′ 1″ 25 / 40 HP 2000lbs 3′ 11″ 6′ 8″ 50 / 90 575lbs 1″

TXV Series

The Ferri TXV Series are boom mowers with gear hydraulic systems for grass, shrubs, bushes, hedges, sticks and wood.

Product Image Max. Horizontal Reach Tractor Power Min. Tractor Weight Min. Tractor Width Flail Head Forward Weight Rotor Power Hydraulic System Power Flail Head Angle Max. Cutting Width
TXV50 ENERGY 15′ 5″ – 17′ 2″ 80 / 100 HP 7500lbs 6′ 11″ 9′ 3″ 2755lbs 49 HP 57 HP 230 degrees 2″
TXV60 ENERGY 18′ 2″ – 20′ 6″ 90 / 110 HP 8000lbs 7′ 7″ 10′ 10″ 2855lbs 49 HP 57 HP 230 degrees 2″

TP Series

The Ferri TP Series is designed to deliver superior performance and durability compared to industry standards. The TP Series models are available in the 15′ 9″ and 19′ 5″ outreach versions and offer a wide range of accessories and options that increase versatility and allow users to perfectly meet their work needs. Designed for farmers, medium-sized farms and local vegetation maintenance operators. Heavy-duty design with reliable cast iron pumps and motor.

Product Image Max. Horizontal Reach Tractor Power Min. Tractor Weight Min. Tractor Width Weight Rotor Power Hydraulic System Power Flail Head Angle Max. Cutting Width
TP510 (CLASSIC) 15′ 9″ 60 / 80 HP 6614lbs 6′ 7″ 1984lbs 35 HP 45 HP 190 degrees 1 3/4″
TP510 (EP-TRONIC) 15′ 9″ 60 / 80 HP 6614lbs 6′ 7″ 1984lbs 35 HP 190 degrees 1 3/4″
TP610 (CLASSIC) 19′ 5″ 70 / 90 HP 7050lbs 7′ 3″ 2094lbs 35 HP 45 HP 190 degrees 1 3/4″
TP610 (EP-TRONIC) 15′ 9″ 60 / 80 HP 6614lbs 6′ 7″ 1984lbs 35 HP 45 HP 190 degrees 1 3/4″

TM Series

The Ferri TM Series are compact, reliable, heavy duty boom mowers designed for farms, municipalities and landscape contractors.

Product Image Max. Horizontal Reach Tractor Power Min. Tractor Weight Min. Tractor Width Weight Rotor Power Hydraulic System Power Flail Head Angle Max. Cutting Width
TM46 FARM 15′ 3″ 50 / 70 HP 5512lbs 5′ 11″ 1713lbs 35 HP 45 HP 190 degrees 1 3/4″

T Series

The Ferri T Series are boom mowers for grass, shrubs, bushes, sticks and wood. Perfect for medium size farms and the maintenance of green spaces.

Product Image Max. Horizontal Reach Tractor Power Min. Tractor Weight Min. Tractor Width Weight Rotor Power Hydraulic System Power Flail Head Angle Max. Cutting Width
T250A 8′ 3″ 20 / 35 HP 1543lbs 3′ 3″ 749lbs 20 HP 31 HP 190 degrees 3/4″
T320A 10′ 7″ 25 / 40 HP 1984lbs 3′ 11″ 816lbs 20 HP 31 HP 190 degrees 3/4″
T320A/R 10′ 7″ 25 / 40 HP 1984lbs 3′ 11″ 816lbs 20 HP 31 HP 190 degrees 3/4″
T380D SMART 12′ 7″ 40 / 60 HP 3747lbs 4′ 11″ 1080lbs 20 HP 31 HP 190 degrees 1 1/4″
T430D SMART 14′ 2″ 50 / 70 HP 4409lbs 5′ 6″ 1091lbs 20 HP 31 HP 190 degrees 1 1/4″
T430DR SMART 14′ 2″ 50 / 70 HP 4409lbs 5′ 6″ 1091lbs 20 HP 31 HP 190 degrees 1 1/4″
T460 SMART 15′ 1″ 50 / 60 HP 4850lbs 5′ 11″ 1279lbs 35 HP 45 HP 190 degrees 1 1/4″