Tag Archives: Duraclass bodies

HM BODIES

 

pdf-button

  • icon
  • icon
  • icon

HM BODY STANDARD FEATURES

  1. 8 gauge high-tensile carbon steel standard, many ultra high-tensile, abrasion resistant and stainless steels available
  2. Stacked understructure, 6" I-beam longsills with 4" crossmembers on 18" centers,HM crossmembers are structural channell
  3. Sloped vertical side braces
  4. 6-panel tailgate

HH BODY OPTIONS

    STANDARD OPTIONS

  • HM: 3/16" or 1/4" AR in lieu of 8 gauge
  • Cabshields - 1/4,1/2 and full. Wind Deflector for Tarp Available for all sizes
  • Side Braces - Vertical or One Horizontal Side Brace

    STANDARD OPTIONS

  • 6 Panel Straight Tailgate Assembly Standard
  • Straight Tailgates
  • 8", 10" or 12" Spill Apron
  • Sloped Sides



HM DUTY DUMP BODY SPECIFICATIONS

MODEL NUMBERINSIDE LENGTHWIDTHBODY CAPACITY,YARDSMATERIAL
SIDE/FRONT/REAR HEIGHT, INCHES
HH10'7'5-78 GAUGE24/34/34

* Additional Body Options



Crossmemberless understructure


Aluminum (Cab Shields and Tailgates Only)


Quick Release Upper Tailgate Pins


Side Swing Tailgate (36" minimum)


Body Side Steps and Handles


Tarp Rails and Walk Rails


Variety of Sliding Door Options


Custom Side and Tailgate Heights


Custom Body Bracing


Air Operated Hoist Controls


Custom Tailgates


HH: For your toughest loads, meet your needs with DuraClass HH. A stacked understructure of 4″ I-beam crossmembers and 6″ I-beam longmembers give you the maximum floor support. Six-panel tailgate and vertical side braces are standard on this rough and ready body.

Yard Bird and Super Duty Yardbird Body

 

pdf-button

  • icon
  • icon
  • icon

YARDBIRD AND SUPER DUTY YARDBIRD BODY STANDARD FEATURES

  1. Double-walled body side, shaped into a unique top rail, side and running board configuration eliminates the outside seam weld below the top rail, preventing moisture and freeze problems
  2. Smooth radiused corners are formed with sell stress on the steel, providing style, greater strength and longer life
  3. Fully-interlaced understructure saves weight over conventional floors and gives added floor support
  4. Rear corner posts are full depth, from the top of the tailgate to the bottom of the rear crossmember
  5. Front corner posts are fully enclosed for added strength and superior resistance to corrosion
  6. Heavy duty platform hinge is greaseable

YARDBIRD AND SUPER DUTY YARDBIRD BODY OPTIONS

    OPTIONS

  • Drop Sides
  • Crossmemberless Understructure
  • LED Marker Light Kit
  • Standard LED STT Light Kit
  • 1/2" Cabshield
  • Stainless Steel



YARDBIRD AND SUPER DUTY YARDBIRD DUMP BODY SPECIFICATIONS

MODEL NUMBERINSIDE LENGTHWIDTHMATERIALBODY CAPACITY (YARDS)
SIDE/FRONT/REAR HEIGHT, INCHESWEIGHT INCLUDING HOIST (LBS)
YARDBIRD 8'1"6'8"10 GAUGE2 - 314/20/201700
YARDBIRD 10'6'8"10 GAUGE2 - 312/18/182002
SUPERDUTY YARDBIRD8'1"7'10 GAUGE3 - 418/24/241999
SUPERDUTY YARDBIRD9'7'10 GAUGE2.5 - 3.514/20/201831
SUPERDUTY YARDBIRD9'7'10 GAUGE3.5 - 4.518/24/242101
SUPERDUTY YARDBIRD10'7'10 GAUGE3 - 414/20/202090
SUPERDUTY YARDBIRD11'7'10 GAUGE2.5 - 3.512/18/182122
SUPERDUTY YARDBIRD11'7'10 GAUGE3.5 - 4.514/20/202182

* FEATURES



Quick release upper tailgate pins


¼ cabshield with window


Fully welded construction


1" Diameter tailgate pin


5/16" GR43 tailgate chains


Chain brackets are banjo eye plates


Pipe handle



SL316 BODY

 

pdf-button

  • icon
  • icon
  • icon

SL316 BODY STANDARD FEATURES

  1. 3/16" floor and rear, 10 gauge sides and front
  2. High-tensile carbon steel standard, many ultra high-tensile, abrasion resistant and stainless steels available
  3. Crossmemberless understructure
  4. Horizontal tailgate brace

SL316 BODY STANDARD OPTIONS

    STANDARD OPTIONS

  • Fully enclosed front posts and full depth rear corner posts
  • SL-316 - 3/16" or 1/4" AR in lieu of 10 gauge
  • CabSheild: 1/4 size, 1/4 size with windows, 1/2 size, 1/2 size with window and full size, and Wind deflector for tap available for all sizes

    STANDARD OPTIONS

  • Standard Tailgate Brace Options: SL-316 - Straight Tailgate Assembly with Horizontal Braces
  • Straight or Sloped Tailgates
  • 8", 10" or 12" Spill Apron
  • Sloped Sides
  • Side Braces - Vertical; One Horizontal Side Brace, Two Horizontal Side Braces



SL316 BODY SPECIFICATIONS

MODEL NUMBERINSIDE LENGTHWIDTHBODY CAPACITY,YARDSMATERIAL
SIDE/FRONT/REAR HEIGHT, INCHESHOIST MODELWEIGHT (INCLUDES HOIST) LBS.
SL-31610'7'5-73/16" floor & rear;
10 ga sides and front
24/34/3418213845
SL-31610'7'6-83/16" floor & rear;
10 ga sides and front
28/38/3818213970

* Additional Body Options



Elliptical Body Design


Telescopic Hoist


Aluminum (Cab Shields and Tailgates Only)


Quick Release Upper Tailgate Pins


Hi-Lift Tailgate, Air or Hydraulic


Side Swing Tailgate (36" minimum)


Body Side Steps and Handles


Tarp Rails and Walk Rails


Variety of Sliding Door Options


Custom Side and Tailgate Heights


Custom Body Bracing


Air Operated Hoist Controls


Along with the patented DuraClass sidewall, smooth radius corners, fully enclosed front posts and full depth rear corner posts, the SL316 features a crossmemberless understructure. Material and dirt resist build-up and clean easily offering better corrosion protection in harsh northern environments. The SL316 crossmemberless design has deep flared longmembers that are fully boxed, eliminating the need for subframe crossmembers. With a horizontal side brace and tailgate brace that reflects the clean radiused lines of the top rail, you will have a dump body that not only works hard but looks good too.

All Medium Duty DuraClass Dump Bodies utilize high-tensile, minimum 45,000 psi steel, for superior strength and lighter body weight than comparable models. Additional ultra high-tensile, abrasion resistant and stainless steel options are available.

HH BODY

 

pdf-button

  • icon
  • icon
  • icon

HH BODY STANDARD FEATURES

  1. 8 gauge high-tensile carbon steel standard, many ultra high-tensile, abrasion resistant and stainless steels available
  2. Stacked understructure, 6" I-beam longsills with 4" crossmembers on 18" centers,HH crossmembers are I-beam
  3. Sloped vertical side braces
  4. 6-panel tailgate

HH BODY OPTIONS

    STANDARD OPTIONS

  • HH: 3/16" or 1/4" AR in lieu of 8 gauge
  • Cabshields - 1/4,1/2 and full. Wind Deflector for Tarp Available for all sizes
  • Side Braces - Vertical or One Horizontal Side Brace

    STANDARD OPTIONS

  • 6 Panel Straight Tailgate Assembly Standard
  • Straight Tailgates
  • 8", 10" or 12" Spill Apron
  • Sloped Sides



HH DUTY DUMP BODY SPECIFICATIONS

MODEL NUMBERINSIDE LENGTHWIDTHBODY CAPACITY,YARDSMATERIAL
SIDE/FRONT/REAR HEIGHT, INCHES
HH10'7'5-78 GAUGE24/34/34
HH10'7'6-88 GAUGE28/38/38

* Additional Body Options



Crossmemberless understructure


Aluminum (Cab Shields and Tailgates Only)


Quick Release Upper Tailgate Pins


Side Swing Tailgate (36" minimum)


Body Side Steps and Handles


Tarp Rails and Walk Rails


Variety of Sliding Door Options


Custom Side and Tailgate Heights


Custom Body Bracing


Air Operated Hoist Controls


Custom Tailgates


HH: For your toughest loads, meet your needs with DuraClass HH. A stacked understructure of 4″ I-beam crossmembers and 6″ I-beam longmembers give you the maximum floor support. Six-panel tailgate and vertical side braces are standard on this rough and ready body.

TD SERIES

 

pdf-button

  • icon
  • icon
  • icon

TD SERIES STANDARD FEATURES

  1. 10 gauge Grade 45 Hi-Tensile carbon steel throughout, 3/16" floor material available
  2. Interlaced understructure on 12" center
  3. 3 Vertical side braces
  4. Horizontal tailgate brace
  5. Manual tailgate release standard, air tailgate release available
  6. Direct Mount Pump/Valve Combination
  7. E-15 Scissors Hoist with subframe @ 45°Mounting Angle-18 Ton Capacity
  8. Single Lever Power Tower
  9. ICC Round Incandescent Lights meet FMVSS requirements
  10. Standard Body Prop
  11. 1/2 Cabshield

TD SERIES OPTIONS

    AVAILABLE OPTIONS

  • 3/16" Floor material
  • air tailgate release
  • Patch gate
  • Tarp rail



MEDIUM DUTY (TRADITIONAL) DUMP BODIES SPECIFICATIONS

MODEL NUMBERLENGTH WIDTHGAUGEYARDSSIDE/FRONT/REAR HEIGHT, INCHESWEIGTH BODY & HOISTHOIST NTEA CLASS
TD10' X 7'10 GAUGE5/623/29/292834 LBSE-15 @ 45° Class E
TD10' X 7'10 GAUGE6/829/35/352950 LBSE-15 @ 45° Class E

SL BODY

 

pdf-button

  • icon
  • icon
  • icon

HIGH COUNTRY STRAIGHT PLOW STANDARD FEATURES

  1. 10 gauge high-tensile carbon steel standard, many ultra high-tensile, abrasion resistant and stainless steels available
  2. Interlaced understructure; 9" formed longsills with 4" formed crossmembers on 20" centers
  3. Sloped vertical side braces
  4. Horizontal tailgate brace

SL BODY STANDARD OPTIONS

    STANDARD OPTIONS

  • Fully enclosed front posts and full depth rear corner posts
  • SL: 3/16" or 1/4" AR in lieu of 10 gauge
  • CabSheild: 1/4 size, 1/4 size with windows, 1/2 size, 1/2 size with window and full size, and Wind deflector for tap available for all sizes

    STANDARD OPTIONS

  • Standard Tailgate Brace Options: SL - Straight Tailgate Assembly with Vertical Braces
  • Straight or Sloped Tailgates
  • 8", 10" or 12" Spill Apron
  • Sloped Sides
  • Side Braces - Vertical; One Horizontal Side Brace, Two Horizontal Side Braces



SL BODY SPECIFICATIONS

MODEL NUMBERINSIDE LENGTHWIDTHBODY CAPACITY,YARDSMATERIAL
SIDE/FRONT/REAR HEIGHT, INCHESHOIST MODELWEIGHT (INCLUDES HOIST) LBS.
SL10'7'5-610 GAUGE24/30/3018213062
SL10'7'6-810 GAUGE28/38/3818213206

* Additional Body Options



Elliptical Body Design


Telescopic Hoist


Aluminum (Cab Shields and Tailgates Only)


Quick Release Upper Tailgate Pins


Hi-Lift Tailgate, Air or Hydraulic


Side Swing Tailgate (36" minimum)


Body Side Steps and Handles


Tarp Rails and Walk Rails


Variety of Sliding Door Options


Custom Side and Tailgate Heights


Custom Body Bracing


Air Operated Hoist Controls


For over 85 years the DuraClass SL Dump Body has been the standard by which all other dump bodies are judged. It’s the most popular dump body ever built. Featuring the DuraClass patented sidewall, smooth radius corners and high tensile steel, the result is a stronger body that weighs less than comparable models. That means bigger payloads and higher profits.

The SL Dump Body features an interlaced understructure to support the body floor on a grid of 8-gauge crossmembers laced to formed longmembers. This design saves weight and adds floor support minimizing washboarding. The SL design utilizes two vertical side braces with radius bends, slanted forward for a contemporary look.

All Medium Duty DuraClass Dump Bodies utilize high-tensile, minimum 45,000 psi steel, for superior strength and lighter body weight than comparable models. Additional ultra high-tensile, abrasion resistant and stainless steel options are available.