Tag Archives: Contractor

1,032 SERIES PLOW

 

pdf-button

  • icon
  • icon

10 FOOT TRIP EDGE PLOW 1032 SERIES STANDARD FEATURES

  1. Fourteen laser cut ribs strengthen the moldboard frame
  2. Trouble free compression type trip springs
  3. "No Pinch" pivot prevents stones, ice or other debris from jamming the trip edge. This allows for the full return of the trip edge every time
  4. Cast iron Skid shoes are standard equipment
  5. Horizontal truss moldboard frame provides exceptional resistance to bending and bowing
  6. Hydraulic scissors lift cuts transport bounce eliminates chains


10 FOOT TRIP EDGE PLOW EQUIPMENT

MODEL10331
BLADE WIDTH10'
BLADE HEIGHT32"
VERTICAL RIBS14
COMPRESSION TRIP SPRINGS6
PLOW WIDTH @ 30° ANGLE103"
CUTTING EDGE (HIGH CARBON 1084 STEEL)1/2" x 8"
TRIP HEIGHT9.75
PLOW WEIGHT (LBS)*938 LBS (electric/hydraulic)

**Weight net of truck mounted hardware**



32" Tall High-Capacity Moldboard


Corrosion Free, Dent Resistant Black HDPE Polyethylene Surface


14 Rib Welded Moldboard Frame


Inch Cutting Edge - 1/2 inch Thick


Plow Mounted Electric/Hydraulic or Central Hydraulic Configurations


9200 SERIES PLOW

 

pdf-button

  • icon
  • icon

9200 SERIES PLOW STANDARD FEATURES

  1. Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
  2. Moldboards flare out from 30" high at center at 37" 8-1/2 foot plows or 36" 9-1/2 foot plows. The high curve density polyethylene moldboards are dent free and corrosion free
  3. High clearance trip edges operate independently of one another, reducing stress and twisting forces on the plow.
  4. 6" high-carbon steel replaceable cutting edge.
  5. Pinch free pivot point is 9 inches above the surface providing protection from higher obstacles such as curbs and parking barriers.
  6. Hinkers pitch adjustment levels the blade to assure full ground contact for optimum cleaning efficiency
  7. 12 laser cut steel ribs add exceptional strength
  8. Long lasting cast ductile iron skid shoes


TRIP EDGE SCOOP PLOW SPECIFICATION

MODEL68126912
BLADE WIDTH8'9'
BLADE HEIGHT30"30"
MOLDBOARD SURFACE1/4" HMW Poly1/4" HMW Poly
VERTICAL RIBS68
TORSION TRIP SPRINGS88
POWER ANGLING RAMS1-1/2" x 10"1-1/2" x 10"
WEIGHT 749 lb.803 lb.

Outer end is angled forward50 degree in full left or right position, reducing high side spillage


Versatile and EfficientUnique concave scoop moldboard captures and moves snow also allows conventional angled plowing


High Clearance 3 Section Trip Edge 9 inch high pivot point provides maximum protection. Each section trips independently for smooth plowing with less stress on the plow


Easy to Use ControllerConvenient, compact fingertip control mounts anywhere or can be hand help. Optional Flexstand allows controls to be positioned right where you want them


8000 SERIES PLOW


pdf-button
  • icon
  • icon
  • icon

8000 SERIES PLOW STANDARD FEATURES

  1. 30 inch tall, high curve, high-density polyethylene moldboards are dent resistant and corrosion free. Snow flows easily for more efficient plowing
  2. Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
  3. Pinch free pivot point is 9 inches above the surface providing protection from higher obstacles such as curbs and parking barriers
  4. The high tensile steel superstructure of the moldboard provides exceptional resistance to bending and bowing, for extra heave duty applications. 10 laser cut steel ribs add exceptional strength
  5. Long lasting cast ductile iron skid shoes

8000 SERIES PLOW OPTIONAL EQUIPMENT

  • 7000 Series - Rubber Snow Deflector
  • 7000 Series - Molded Poly Snow Deflector
  • 7000/8000 Series - Rubber Cutting Edges
  • 7000/8000 Series - Clip-on Box Ends
  • 7000/8000 Series - Flexstand Controller Holder



800 SERIES C-PLOW SPECIFICATIONS

MODEL88028902
BLADE WIDTH8'9'
BLADE HEIGHT30"30"
MOLDBOARD SURFACE1/4" HMW POLY1/4" HMW POLY
VERTICAL RIBS1010
COMPRESSION TRIP SPRINGS44
PLOW WIDTH @ 30° ANGLE83"93"
TOP CUTTING EDGE (HIGH CARBON 1084 STEEL)1/4" x 4"1/4" x 4"
LOWER CUTTING EDGE (HIGH CARBON 1084 STEEL)3/8" x 6"3/8" x 6"
TRIP HEIGHT9" 9"
PLOW WEIGHT800 lbs835 lbs

The Hiniker 8000 Series C-Plow snowplow offers all of the heavy-duty performance of a conventional plow plus the added versatility of a high-performance backdrag
plow. Plow loading docks, residential driveways, and congested parking areas faster than ever. The patentedHiniker C-Plow blade actually converts from a conventional plow into a backdrag plow with the push of a button, letting you remove snow quickly and easily from garage aprons, curbs, loading docks, and tight corners. Then touch a button again to flip the blade upright and push the snow away

7000 SERIES CONVENTIONAL PLOW

 

pdf-button

  • icon
  • icon
  • icon

7000 CONVENTIONAL PLOW STANDARD FEATURES

  1. Super bright quad halogen headlights have up to twice the power of typical sealed beam lamps
  2. Externally mounted pump simplifies installation, comes off the truck with the plow
  3. The high tensile steel superstructure of the moldboard provides exceptional resistance to bending and bowing, for extra heavy duty applications. 10 laser cut steel ribs add exceptional strength
  4. Long lasting cast ductile iron skid shoes
  5. Pinch free pivot point is 9 inches above the surface providing protection from higher obstacles such as curbs and parking barriers
  6. 30 inch tall high curve, high density polyethylene moldboard is dent resistant and corrosion free. Snow flows easily for more efficient plowing. Optional rubber or polyethylene snow deflectors
  7. Slick 1/4" HMW poly moldboard surface resists dents, never needs paint

7000 CONVENTIONAL PLOW OPTIONAL EQUIPMENT

  • 7000 Series - Rubber Snow Deflector
  • 7000 Series - Molded Poly Snow Deflector
  • 7000/8000 Series - Rubber Cutting Edges
  • 7000/8000 Series - Clip-on Box Ends
  • 7000/8000 Series - Flexstand Controller Holder



7000 SERIES CONVENTIONAL PLOW SPECIFICATIONS

MODEL78027902
BLADE WIDTH8'9'
BLADE HEIGHT30"30"
VERTICAL RIBS1010
COMPRESSION TRIP SPRINGS44
PLOW WIDTH @ 30° ANGLE83"93"
CUTTING EDGE (HIGH CARBON 1084 STEEL)3/8" x 6"3/8" x 6"
TRIP PIVOT POINT HEIGHT9"9"
WEIGHT (NET OF TRUCK MOUNTED HARDWARE)733 lbs767 lbs

The 7000 horizontal-truss moldboard design provides incredible strength, durability and resistance to bowing. Ten laser-cut support ribs add exceptional vertical strength. The corrosion-proof poly moldboard is dent-resistant with less surface friction for easier plowing and greater efficiency. In addition, impregnated color means long-lasting, good-looking appearance.

WIDEOUT PLOW

 

pdf-button

  • icon
  • icon
  • icon

WIDEOUT PLOW STANDARD FEATURES

  1. Hydraulic Wing Extensions - Independently position each wing to maximize blade width and move more snow. Wings slide laterally across a structurally reinforced slide box
  2. Dual Power Bar - Six vertical ribs and dual horizontal POWER BAR design provide exceptional strength and prevent blade twisting, even in the most demanding snow conditions.
  3. Trip Springs - Four trip return springs help protect your plow and truck by allowing the blade to trip forward when striking an obstacle

WIDEOUT PLOW OPTIONS

    OPTIONAL ACCESSORIES

  • Snow deflector
  • Shoe kit
  • Back drag edge



WESTERN WIDEOUT SPECIFICATIONS

Western WIDEOUT 
BLADE WIDTH8' retracted
10' expanded
8'10"scoop
BLADE HEIGHT29"
BLADE GAUGE12
TRIP SPRINGS4
VERTICAL RIBS6
ANGLING RAMS1 - 1/2" x 10"
PLOWING WIDTH ( FULL ANGLE)7' 2" retracted
9' expanded
7' 11" scoop
APPROXIMATE WEIGHT (LESS MOUNT)940 lb
DISC SHOESoptional
CUTTING EDGE1/2" x 6" blade
1½" x 8" poly wing

THE ULTIMATE SNOW-MOVING MACHINE.
Get an 8′ straight blade, a 10′ straight blade, an 8′ 10″ scoop/pusher blade, or an unsurpassed windrowing machine – all at the touch of a button. The WESTERN WIDE-OUT adjustable – wing snowplow hydraulically transforms to move more snow, no matter what the condition. Up to 30% more. It’s the ultimate in CONTRACTOR GRADE performance.