Tag Archives: Bonnell Plows

Straight Utility Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

UTILITY STRAIGHT PLOW STANDARD FEATURES

  1. 3/8" Formed plate a-frame
  2. 3" x 3" x 1/4" tube front push frame
  3. (2) Single acting 2" x 10" reversing cylinders
  4. 1" Thick swivel skid shoes
  5. (6) Table to moldboard hook-up points with 3/4" pins
  6. 15" Extended overhang
  7. (8) 3/8" Ribs

UTILITY STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1" pins @ 23.5”,standard))
  • Custom Application

    Running Gear Options

  • Even Wear Shoes

    Moldboard Options

  • ¾” Bottom Angle
  • Curb Cut (Mailbox Cut)
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available



UTILITY STRAIGHT PLOW SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTTRIP MECHANISMCUTTING SWATH @ 35˚MOLD-BOARD TYPEAPPROXIMATE WEIGHT OF BASE UNIT
9ST31M49'0"31"MOLDBOARD7' 9-1/2"STEEL975 LBS
10ST31M410'0"31"MOLDBOARD8'8'STEEL1025 LBS
9SP31M49'0"31"MOLDBOARD7' 9-1/2"POLY975 LBS
10SP31M410'0"31"MOLDBOARD8'8"POLY1025 LBS
9ST31T49'0"31"TRIP-EDGE7' 9-1/2"STEEL1175 LBS
10ST31T410'0"31"TRIP-EDGE8'8"STEEL1225 LBS
9SP31T49'0"31"TRIP-EDGE7' 9-1/2"POLY1175 LBS
10SP31T410'0"31"TRIP-EDGE8'8"POLY1225 LBS

* longer lengths available upon request



Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)


Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs


Moldboard Pitch15˚off vertical


Reversing Table:3" x 2" x 1/4" Structural Tubinge


Lower Reinforcing Angle:4" x 4" x 1/2" Angle


Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing


A-Frame:3/8" Steel Plate


Reversing Cylinders:2" x 10" Single Acting


Reversing Limits (left and right):30 degrees


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


Pivot Pin:1" Grade Five Bolt


Cylinder Pins:1" C1045 Steel Pins


Plow to Table Hinge Points:(6) Spanning 69", 3/4" Pins


Number of Trip Springs:(6) .400 Wire Extension Trip


Lift Chain:5/16" Hi-Test Chain


Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.

Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.

Mid Weight Straight Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

MIDWEIGHT STRAIGHT PLOW STANDARD FEATURES

  1. (4) Adjustable Pitch Setting
  2. (2) Compression trip springs mounted on the trip bars
  3. 3/8" Formed plate push assembly
  4. (2) Single acting 3" x 10" reversing cylinders
  5. (4) Table to moldboard hook-up points with 3/4" bearing surface and 1-1/4" pins
  6. 4" X 4" x 3/8" fully boxed bottom angle

MIDWEIGHT STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels

    Moldboard Options

  • Curb Cut (Mailbox Cut)
  • 1/2" Ribs

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available



    MIDWEIGHT STRAIGHT SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
    9ST36M89'0"36"7'5"1400 LBS2
    10ST36M810'0"36"8'2"1450 LBS2
    11ST36M811'0"36"9'0"1500 LBS2
    12ST36M812'0"36"9'10"1550 LBS2
    9ST42M89'0"42"7'5"1525 LBS2
    10ST42M810'0"42"8'2"
    1580 LBS2
    11ST42M811'0"42"9'0"1635 LBS2
    12ST42M812'0"42"9'10"1690 LBS2

    * longer lengths available upon request



    Moldboard Thickness:10 Gauge


    Moldboard Reinforcing:(6) - 3/8" thick steel ribs x 4" @ bottom, 2" @ top


    Adjustable Moldboard Pitch Setting:10˚, 15˚, 20˚, 25˚ off vertical


    Lower Reinforcing Angle:4" x 4" x 3/8"


    Reversing Frame:3-1/2" x 3-1/2" x 3/8" A36 Plate


    Diameter of Hinge Pins:1-1/4"


    Reversing Cylinders:Chrome 3" Bore x 16" Stroke (3" Rod) Single Acting


    Reversing Limits (left and right):0 to 35 degrees with Positive Stops


    Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


    Pivot Pin:1-1/4" Grade 8 Bolt


    Plow Table Hinge Points:(4) Spanning 86"


    Cylinder Pins:1" C1045 Steel Pins


    ***Call factory for complete specifications and optional equipment not listed. Weights do not include optional equipment.***


    The Bonnell Mid Weight Straight Moldboard Snow Plow is specifically designed to efficiently remove snow in and around obstructions often found in urban areas. All models feature a moldboard adjustable in pitch to four different angle settings.

    Proper moldboard position is assured through the use of two rugged compression springs which retain their integrity longer than ordinary extension springs. This plow is light in weight with strength where you need it. With our wide range of available options, you can tailor the Mid Weight plow to fit your exact needs.

    Metropolitan Straight Snow Plow


    pdf-button
    • icon
    • icon
    • icon

    METROPOLITAN STRAIGHT PLOW STANDARD FEATURES

    1. (3) Adjustable Pitch Setting
    2. 4"X 4" x 3/8" tube push frame spanning 90"
    3. (2) Compression trip bars, with 3" rubber bushings top & bottom for return trip cushion
    4. (5) Table Moldboard Hook-Up Points with 1/2" reinforced ribs, 3" Bearing Surface and 1-1/4" Pins
    5. 7" x 4" x 1/2" fully boxed bottom angle
    6. Extended moldboard continuously welded

    METROPOLITAN STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push Frame
    • Manual Reverse

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    METROPOLITAN STRAIGHT PLOW SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH @ 35˚APPROXIMATE WEIGHT OF BASE UNITNUMBER OF SPRINGS
    10ST36MC710'0"36"8'2"2050 LBS2
    11ST36MC711'0"36"9'0"2115 LBS2
    12ST36MC712'0"36"9'10"2180 LBS2
    10ST42MC710'0"42"8'2"2142 LBS2
    11ST42MC711'0"42"9'0"2209 LBS2
    12STM2MC712'0"42"9'10"2276 LBS2
    10ST49MC710'0"49"8'2"2190 LBS2
    11ST49MC711'0"49"9'0"2260 LBS2
    12ST49MC712'0"49"9'10"2330 LBS2

    * longer lengths available upon request



    Moldboard Thickness:10 Gauge


    Moldboard Reinforcing:(7)-1/2” x 3” Ribs


    Adjustable Moldboard Pitch Setting25˚, 15˚ or 5˚ off vertical


    Lower Reinforcing Angle:7" x 4" x 1/2" Fully Boxed with 3/8" x 6-3/4" Plate


    Reversing Frame:5' x 3-1/2" x 1/2" Angle Iron Sector


    Reversing Cylinders:Chrome 3" Bore x 10" Stroke (2" Rod) Double Acting


    Reversing Limits (left and right):0 to 35 degrees with Positive Stops


    Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


    Cutting Edge:5/8" x 6" High Carbon Steel


    The Bonnell Metropolitan Straight Moldboard Snowplow in either steel or polyethylene is specifically designed to efficiently remove snow in and around obstructions often found in urban areas.

    All models feature a moldboard adjustable in pitch to three different angle settings. Proper moldboard position is assured through the use of two rugged compression springs which retain their integrity longer than ordinary extension springs. This plow is light in weight yet rugged in design, with strength where you need it.

    The moldboard has a built-in extended rolled top which provides a continuation of the curve, deflecting the snow down and away, greatly improving vision which results in better maintenance and greater safety. With our wide range of available options, you can tailor the Metropolitan plow to fit your exact needs.

    HIGH COUNTRY STRAIGHT

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY STRAIGHT PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available



    HIGH COUNTRY STRAIGHT SPECIFICATIONS

    MODEL NUMBERLENGTHHEIGHTCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    NUMBER OF SPRINGS
    10ST36MX110'0"36"8'2"1960 lbs.4
    11ST36MX111'0"36"9'0"2025 lbs.4
    12ST36MX112'0"36"9'10"2090 lbs.4
    10ST42MX110'0"
    42"8'2"2052 lbs.6
    11ST42MX111'0"42"9'0"2119 lbs.6
    12ST42MX112'0"42"9'10"2186 lbs.6
    10ST49MX110'0"49"8'2"2100 lbs.6
    11ST49MX111'0"49"9'0"2170 lbs.6
    12ST49MX112'0"49"9'10"2240 lbs.6
    11ST60MX111'0"60"9'0"2600 lbs.8
    12ST60MX112'0"60"9'10"2600 lbs.8

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    Bonnell High Country Straight Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow. Bonnell’s many standard features are what set us apart from our competition.
    The poly bushing provides cushion, making hitting an obstruction less intense and safer. All High Country Plows include an automatic safety feature which allows the moldboard to trip forward when the blade encounters an obstruction. After the obstruction is cleared, heavy-duty extension springs return the moldboard to its plowing position. This minimizes damage to the streets, plow, truck and driver.

    HIGH COUNTRY TAPERED

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY TAPERED PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHLEADING END HEIGHTDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGSCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    10TA2848MX110'0"11'28"
    48"14"68'2"2069 lbs.
    11TA2749MX111'0"
    12'
    27"
    49"15"69'0"2136 lbs.
    12TA2650MX112'0"13'
    26"
    50"16"69'9"2123 lbs.
    10TA3252MX110'0"12'
    32"52"16"68'2"2109 lbs.
    11TA3153MX111'0"13'
    31"53"17"69'0"2179 lbs.
    12TA3054MX112'0"14'
    30"54"19"69'9"2258 lbs.
    14TA3861MX110'0"12'
    39"60"18"68'2"2192 lbs.
    11TA3861MX111'0"13'
    38"61"19"69'0"2267 lbs.
    12TA3762MX112'0"14'
    37"62"20"69'9"2351 lbs.
    12TA272MX112'0"14'
    42"72"20"69'9"2351 lbs.

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    Bonnell High Country Tapered Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow. This plow produces the same results when plowing to the left or to the right.

    Bonnell’s many standard features are what set us apart from our competition. These features, outlined above, include the 7” x 4” x 1/2” fully boxed bottom angle which adds strength to keep the moldboard from bending. We also insert a 3” x 3” poly bushing into the top and bottom of both trip bars to absorb shock from tripping. The poly bushing provides cushion, making hitting an obstruction less intense and safer on the driver, plow, truck and the road.

    All High Country Plows include an automatic safety feature which allows the moldboard to trip forward when the blade encounters an obstruction. After the obstruction is cleared, heavy-duty extension springs return the moldboard to its plowing position. This minimizes damage to the streets, plow, truck and driver.

    HIGH COUNTRY EXPRESSWAY

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY EXPRESSWAY PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    HIGH COUNTRY EXPRESSWAY SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHDISCHARGE END HEIGHTDISCHARGE END OVERHANGNUMBER OF SPRINGCUTTING SWATH AT 35˚APPROXIMATE WEIGHT
    OF BASE UNIT
    10EW3648MX110'0"13'8"48"14"68'2"2290 lbs.
    11EW3649MX111'0"14'8"49"15"69'0"2367 lbs.
    12EW3650MX112'0"15'8"50"16"69'9"2454 lbs.
    10EW4052MX110'0"
    13'8"52"16"68'2"2360 lbs.
    11EW4053MX111'0"14'8"53"17"69'0"2440 lbs.
    12EW4054MX112'0"15'8"54"19"69'9"2529 lbs.
    10EW4760MX110'0"13'8"60"18"68'2"2480 lbs.
    11EW4761MX111'0"14'8"61"19"69'0"2558 lbs.
    12EW4762MX112'0"15'8"62"20"69'9"2652 lbs.

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


    Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    HIGH COUNTRY DISTANCE DISCHARGE

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY DISTANT DISCHARGE PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 1/2" Fully Boxed Bottom Angle
    8. Vertical ribs on ear to reduce vibration and cracking

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    HIGH COUNTRY DISTANT DISCHARGE SPECIFICATIONS

    MODEL NUMBERCUTTING EDGE LENGTHOVERALL LENGTHEAR HEIGHTMOLDBOARD HEIGHTWEIGHT OF BASE UNIT ONLYNUMBER OF SPRINGSCUTTING SWATH AT 35˚MOLDBOARD OVERHANG APPROXIMATES
    10DD42MX110'0"12'58"42"2269 lbs.68'2"18"
    11DD42MX111'0"13'58"42"2330 lbs.69'0"18"
    12DD42MX112'0"14'58"42"2391 lbs.69'9"18"
    10DD49MX110'0"
    12'4"68"49"2346 lbs.68'2"18"
    11DD49MX111'0"13'4"68"49"2436 lbs.69'0"18"
    12DD49MX112'0"14'4"68"49"2526 lbs.69'9"18"
    14DD49MX114'0"16'4"68"49"2669 lbs.611'6"18"
    11DD60MX111'0"14'1"81"60"2890 lbs.69'0"21"
    12DD60MX112'0"15'1"81"60"2980 lbs.69'9"21"
    14DD60MX114'0"17'1"81"60"3160 lbs.611'6"21"

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Discharge Ear Thickness: 10 Gauge


    Moldboard Reinforcing: (7 to 9) - 1/2" x 3" Ribs


    Adjustable Moldboard Pitch Setting: 35˚, 25˚ or 15˚ off vertical


    Lower Reinforcing Angle: 7" x 4" x 1/2"


    Reversing Frame: 5" x 3/8" Wall Front Push Tube


    Diameter of Hinge Pin:1-1/4"


    Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right): 0 to 35 degrees


    Plow to Table Hinge Points: (5) Spanning 90"


    Cutting Edge: 5/8" x 6" High Carbon Steel


    Pivot Pin: 1 - 1/2" Grade 8 Bolt


    Cylinder Pins: 1 - 1/4" C1045 Steel Pins


    Bonnell High Country Distant Discharge Snow Plows are designed for high-speed plowing applications. The inverted funnel-shaped ends, combined with our standard extended roll moldboard, picks up the snow and throws it far and away from the road. This plow produces the same results when plowing to the left or to the right.

    Bonnell’s many standard features are what set us apart from our competition. These features, outlined above, include the 7″ x 4″ x 1/2″ fully boxed bottom angle which adds strength to keep the moldboard from bending. We also insert a 3″ x 3″ poly bushing into the top and bottom of both trip bars to absorb shock from tripping. The poly bushing provides cushion, making hitting an obstruction less intense and safer on the driver, plow, truck and the road.

    Plows are available with steel or poly moldboards. Our poly plows are all poly, including the ears. You may also choose left or right ear distant discharge.

    Meeting the demands of Mother Nature in the winter is a tough job. You need a tough plow to get you through the harshest conditions. Bonnell High Country series snow plows will clear the way.

    HIGH COUNTRY TORSION TRIP EDGE

     

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY TORSION TRIP EDGE PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) 1" X 2-1/2" trip connecting posts - fastened by 1-1/4" bolts,
    5. (5) Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. (4) 3/4" Diameter spring wire torsion - trip springs- independently replaceable, 7/8" optional
    7. Extended moldboard continuously welded

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    HIGH COUNTRY TORSION TRIP EDGE SPECIFICATIONS

    MODEL NUMBEROVERALL LENGTHOVERALL HEIGHTCUTTING SWATH AT 35˚NUMBER OF SPRINGS
    10ST36TT110'36"8'2"2050 lbs.
    11ST36TT111'36"9'0"2115 lbs.
    12ST36TT112'36"9'9"2180 lbs.
    10ST42TT110'42"8'2"2142 lbs.
    11ST42TT111'42"9'0"2209 lbs.
    12ST42TT112'42"9'9"2276 lbs.
    10ST49TT110'49"9'0"2190 lbs.
    11ST49TT111'49"9'9"2260 lbs.
    12ST49TT112'49"11'6"2330 lbs.

    * longer lengths available upon request



    Spring Wire Diameter: 3/4" (7/8" optional)


    Number of Springs: 4


    Adjustable Moldboard Pitch Setting: 15˚ or 5˚ or 15˚off vertical


    Lower Reinforcing Angle: 4" x 4" x 1/2"


    Trip Angle:4" x 4" x 1/2" reinforced with 1/2" plate gussets


    Trip Pin Diameter: 1-1/4"


    Bonnell High Country Torsion Trip Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow.

    Bonnell’s many standard features are what set us apart from our competition. Our torsion-trip cutting edge is designed with (4) ¾” spring wire torsion trip springs, each of which are independently replaceable without removing other springs or hinge pins. The moldboard has (3) adjustable pitch settings, allowing you to regulate the attack angle of the cutting edge. The lower reinforcing angle has (5) hinge ears welded along its bottom provided for attaching the trip lower trip section.

    Plows are available with steel or poly moldboards.

    Meeting the demands of Mother Nature in the winter is a tough job. You need a tough plow to get you through the harshest conditions. Bonnell High Country series snow plows will clear the way.

    HIGH COUNTRY
    AIRPORT

    pdf-button

    • icon
    • icon
    • icon

    HIGH COUNTRY AIRPORT PLOW STANDARD FEATURES

    1. Deep "C" A-Frame
    2. (3) Adjustable Pitch Setting
    3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
    4. (2) Telescopic Trip Bars, (8 or 10) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
    5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
    6. Extended Roll Moldboard Continuously Welded
    7. 7" x 4" x 3/4" Fully Boxed Bottom Angle

    HIGH COUNTRY STRAIGHT PLOW OPTIONS

      Plow Lift Options

    • Chain
    • Level Raise Lift System™
    • Chain and Saddle
    • Cable Wrap

      Plow Hook-Up Options

    • Quick Attach Loop
    • Swivel Bar with Push Ears
    • (1-¼" pins @ 30.5”)
    • Husting Style
    • Custom Application

      Running Gear Options

    • Standard-Duty Mushroom Shoes
    • Heavy-Duty Mushroom Shoes
    • Heavy-Duty Even Wear Shoes
    • Carbide Even Wear Shoes
    • 10" Steel Caster (Kingpinless) Wheels
    • 5.70 x 8.0 Pneumatic Tires*
    • Foam-Filled Rubber Tires*
      *Should not be used with Cable Wrap Lift Assemblies

      Moldboard Options

    • ¾” Bottom Angle
    • 7-Gauge Steel Construction
    • Curb Cut (Mailbox Cut)
    • Extra Ribs
    • UHMW Poly Construction

      Tripping Options

    • Extension Trip Moldboard
    • Compression Trip Moldboard
    • Torsion Trip Cutting Edge
    • Dual Trip Moldboard & Cutting Edge

      Table Options

    • Extended Push

      Cutting Edge Options

    • High Carbon Steel
    • Rubber
    • UHMW Poly
    • Carbide Insert with Cover Blade
    • Flame Hardened
    • PolarFlex Systems
    • All cutting edges available in various sizes

      Other Options

    • Cushion Valve
    • Curb Shoes
    • Blade Savers - Carbide
    • Blade Guides
    • Rubber Snow Deflector
    • Plow Stand
    • Nitrided Cylinders
    • Extra Extension Trip Springs

      Paint Options

    • Special Paint Available
    img



    HIGH COUNTRY AIRPORT SPECIFICATIONS

     

    * longer lengths available upon request



    Moldboard Thickness: 10 Gauge


    Height: 42",49", and 60"


    Length:14 - 20 foot


    Moldboard Reinforcing:(7 to 13) - 1/2" x 3" Ribs


    Adjustable Moldboard Pitch Setting:35˚, 25˚, 15˚off vertical


    Lower Reinforcing Angle:5" x 3/8: Wall Front Push Tube


    Reversing Cylinder:4" Bore x 12" Stroke (2" Rod) Double Acting


    Reversing Limits (left & right):0 to 35 degrees


    Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


    Cutting Edge:5/8" x 6: High Carbon Steel Standard Punch


    Pivot Pin:1-1/2" Grade 8 Bolt


    Cylinder Pins:1-1/4" C1045 Steel Pins