Tag Archives: Bonnell Industires

BAT WING EXTENSIONS

 

pdf-button

  • icon
  • icon

BAT WING SNOW PLOW STANDARD FEATURES

  1. Fold back wings for easy road transport
  2. Easy pin removal to convert to conventional plow
  3. Up to 18


BAT WING PLOW SPECIFICATIONS

BASE PLOWEXTENSION WIDTHTOTAL WIDTH
10'24"14"
11"24" - 30"15' - 16'
12'24" - 36"16' - 18'

* Not available with ALL PLOWS


Call factory with your needs for a complete design consultation

HPT B1 & B2 BODIES

 

pdf-button

  • icon
  • icon
  • icon

HPT B1 & B2 BODIES STANDARD FEATURES

  1. Fully enclosed front corner post
  2. DuraClass bodies come with full depth corner posts and enclosed tailgate hardware
  3. Greaseable rear hinges have the widest bearing surface and largest pin diameter in the industry

HPT B1 & B2 BODIES OPTIONS

    OPTIONS

  • Aluminum (Cab Shields & Tailgates only)
  • Sloped Tailgate
  • Reverse Asphalt Taper
  • Sloping Side Panels
  • Hi-Lift Tailgate, Air or Hydraulic
  • Dual Action Side Swing Tailgate
  • Body Side Steps and Handles

    OPTIONS

  • Tarp Rails and Walk Rails
  • Variety of Sliding Door Options
  • Custom Side and Tailgate Heights
  • Custom Body Bracing
  • Air Operated Hoist Controls
  • Variety of Cylinder/Doghouse Configurations
  • Stainless Steel Bodies available



HPT B1 & B2 BODIES SPECIFICATIONS

         
HPT-B1 SPECIFICATION
INSIDE LENGTHWIDTH (INSIDE/OUTSIDE)BODY CAPACITY YARDSMATERIALSIDE STYLESIDE/FRONT/REAR HEIGHT INCHESHOIST MODELUNDERSTRUCTUREWEIGHT (INCLUDES HOIST) LB**
14'84" / 96"10-123/16" Hi-Tensile SteelElliptical, closed fender38/54/44HPT53-120Crossmemberless 10" I Beam Longbeams4309
15'84" / 96"12-143/16" Hi-Tensile SteelElliptical, closed fender38/54/46HPT53-130 Crossmemberless 10" I Beam Longbeams4790
16'84" / 96"15-173/16" Hi-Tensile SteelElliptical, closed fender44/56/52HPT63-140Crossmemberless 10" I Beam Longbeams5171
17'84" / 96"16-193/16" Hi-Tensile SteelElliptical, closed fender44/64/52HPT63-150Crossmemberless 10" I Beam Longbeams5446
18'84" / 96"17-203/16" Hi-Tensile SteelElliptical, closed fender44/68/52HPT53-160Crossmemberless 10" I Beam Longbeams5600
HBT-B2 SPECIFICATION
10'84" / 96"6-83/16" AR 400Elliptical, open fender28/38/381821Crossmemberless 10" I Beam Longbeams2313
11'84" / 96"6.6-93/16" AR 400Elliptical, open fender28/38/381821Crossmemberless 10" I Beam Longbeams2500
14'84" / 96"10-123/16" Hi-Tensile SteelElliptical, open fender38/54/44HPT53-120Crossmemberless 10" I Beam Longbeams4126
15'84" / 96"12-143/16" Hi-Tensile SteelElliptical, open fender38/54/46HPT53-130Crossmemberless 10" I Beam Longbeams4590
16'84" / 96"15-173/16" Hi-Tensile SteelElliptical, open fender44/56/52HPT53-140Crossmemberless 10" I Beam Longbeams4954
17'84" / 96"16-193/16" Hi-Tensile SteelElliptical, open fender44/64/52HPT53-150Crossmemberless 10" I Beam Longbeams5212
18'84" / 96"17-203/16" Hi-Tensile SteelElliptical, open fender44/68/52HPT53-160Crossmemberless 10" I Beam Longbeams5350

DuraClass HPT-B1 and HPT-B2, “the TUB” bodies, are lightweight champs in a heavyweight world. A semi-elliptical body using high tensile steels, crossmemberless understructure, and a body sidewall without extra bracing add up to an exceptional payload-to-weight ratio. The rounded floor and low center of gravity give it the strength and stability for heavy hauling. Loads are discharged cleanly from the curved body shell.