STORAGE STAND


HIGH COUNTRY STRAIGHT PLOW STANDARD FEATURES

- Deep "C" A-Frame
- (3) Adjustable Pitch Setting
- 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
- (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
- (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
- Extended Roll Moldboard Continuously Welded
- 7" x 4" x 1/2" Fully Boxed Bottom Angle
HIGH COUNTRY STRAIGHT PLOW OPTIONS
Plow Lift Options
- Chain
- Level Raise Lift System™
- Chain and Saddle
- Cable Wrap
Plow Hook-Up Options
- Quick Attach Loop
- Swivel Bar with Push Ears
- (1-¼" pins @ 30.5”)
- Husting Style
- Custom Application
Running Gear Options
- Standard-Duty Mushroom Shoes
- Heavy-Duty Mushroom Shoes
- Heavy-Duty Even Wear Shoes
- Carbide Even Wear Shoes
- 10" Steel Caster (Kingpinless) Wheels
- 5.70 x 8.0 Pneumatic Tires*
- Foam-Filled Rubber Tires*
*Should not be used with Cable Wrap Lift Assemblies
Moldboard Options
- ¾” Bottom Angle
- 7-Gauge Steel Construction
- Curb Cut (Mailbox Cut)
- Extra Ribs
- UHMW Poly Construction
Tripping Options
- Extension Trip Moldboard
- Compression Trip Moldboard
- Torsion Trip Cutting Edge
- Dual Trip Moldboard & Cutting Edge
Table Options
- Extended Push
Other Options
- Cushion Valve
- Curb Shoes
- Blade Savers - Carbide
- Blade Guides
- Rubber Snow Deflector
- Plow Stand
- Nitrided Cylinders
- Extra Extension Trip Springs
Paint Options
- Special Paint Available
SPECIFICATIONS
MODEL NUMBER | CUTTING EDGE LENGTH | OVERALL LENGTH | LEADING END HEIGHT | DISCHARGE END HEIGHT | DISCHARGE END OVERHANG | NUMBER OF SPRINGS | CUTTING SWATH AT 35˚ | APPROXIMATE WEIGHT
OF BASE UNIT
|
10TA2848MX1 | 10'0" | 11' | 28"
| 48" | 14" | 6 | 8'2" | 2069 lbs. |
11TA2749MX1 | 11'0"
| 12'
| 27"
| 49" | 15" | 6 | 9'0" | 2136 lbs. |
12TA2650MX1 | 12'0" | 13'
| 26"
| 50" | 16" | 6 | 9'9" | 2123 lbs. |
10TA3252MX1 | 10'0" | 12'
| 32" | 52" | 16" | 6 | 8'2" | 2109 lbs. |
11TA3153MX1 | 11'0" | 13'
| 31" | 53" | 17" | 6 | 9'0" | 2179 lbs. |
12TA3054MX1 | 12'0" | 14'
| 30" | 54" | 19" | 6 | 9'9" | 2258 lbs. |
14TA3861MX1 | 10'0" | 12'
| 39" | 60" | 18" | 6 | 8'2" | 2192 lbs. |
11TA3861MX1 | 11'0" | 13'
| 38" | 61" | 19" | 6 | 9'0" | 2267 lbs. |
12TA3762MX1 | 12'0" | 14'
| 37" | 62" | 20" | 6 | 9'9" | 2351 lbs. |
12TA272MX1 | 12'0" | 14'
| 42" | 72" | 20" | 6 | 9'9" | 2351 lbs. |
* longer lengths available upon request
Moldboard Thickness: 10 Gauge
Moldboard Reinforcing: (7) - 1/2” x 3” Ribs
Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical
Lower Reinforcing Angle: 7" x 4" x 1/2"
Reversing Frame: 5" x 3/8" Wall Front Push Tube
Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting
Reversing Limits (left & right): 0 to 35 degrees
Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"
Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch
Pivot Pin: 1 - 1/2" Grade 8 Bolt
Cylinder Pins: 1 - 1/4" C1045 Steel Pins