Mid Weight Straight Snow Plow

10ST36M8

The Bonnell Mid Weight Straight Moldboard Snow Plow is specifically designed to efficiently remove snow in and around obstructions often found in urban areas. All models feature a moldboard adjustable in pitch to four different angle settings.

Proper moldboard position is assured through the use of two rugged compression springs which retain their integrity longer than ordinary extension springs. This plow is light in weight with strength where you need it. With our wide range of available options, you can tailor the Mid Weight plow to fit your exact needs.

MidWeight.pdf

pdf-button

  • icon
  • icon
  • icon

HIGH COUNTRY STRAIGHT PLOW STANDARD FEATURES

  1. Deep "C" A-Frame
  2. (3) Adjustable Pitch Setting
  3. 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
  4. (2) Telescopic Trip Bars, (6) Extension Trip Springs and (4) 3" Poly Bushings for Return Trip Cushions
  5. (5) Table Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
  6. Extended Roll Moldboard Continuously Welded
  7. 7" x 4" x 1/2" Fully Boxed Bottom Angle

HIGH COUNTRY STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™
  • Chain and Saddle
  • Cable Wrap

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1-¼" pins @ 30.5”)
  • Husting Style
  • Custom Application

    Running Gear Options

  • Standard-Duty Mushroom Shoes
  • Heavy-Duty Mushroom Shoes
  • Heavy-Duty Even Wear Shoes
  • Carbide Even Wear Shoes
  • 10" Steel Caster (Kingpinless) Wheels
  • 5.70 x 8.0 Pneumatic Tires*
  • Foam-Filled Rubber Tires*
    *Should not be used with Cable Wrap Lift Assemblies

    Moldboard Options

  • ¾” Bottom Angle
  • 7-Gauge Steel Construction
  • Curb Cut (Mailbox Cut)
  • Extra Ribs
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Compression Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available
img



SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTCUTTING SWATH AT 35˚APROXIMATE WEIGHTNUMBER OF SPRINGS
10ST36MX110'0"
36"
8'2"1960 lbs.4
11ST36MX111'0"
36"
9'0"2025 lbs.4
12ST36MX112'0"
36"
9'10"2090 lbs.4
10ST42MX110'0"
42"8'2"2052 lbs.6
11ST42MX111'0"
42"9'0"2119 lbs.6
12ST42MX112'0"
42"9'10"2186 lbs.6
10ST49MX110'0"
49"8'2"2100 lbs.6
11ST49MX111'0"
49"9'0"2170 lbs.6
12ST49MX112'0"
49"9'10"2240 lbs.6
11ST60MX111'0"
60"9'0"2500 lbs.8
12ST60MX112'0"
60"9'10"2600 lbs.8

* longer lengths available upon request



Moldboard Thickness: 10 Gauge


Moldboard Reinforcing: (7) - 1/2” x 3” Ribs


Adjustable Moldboad Pitch Setting: 35˚, 25˚ or 15˚ off vertical


Lower Reinforcing Angle: 7" x 4" x 1/2"


Reversing Frame: 5" x 3/8" Wall Front Push Tube


Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting


Reversing Limits (left & right): 0 to 35 degrees


Plow to Table Hinge Points: (5) 1 - 1/4" Hinge Pins, Spanning 90"


Cutting Edge: 5/8" x 6" High Carbon Steel Std. Punch


Pivot Pin: 1 - 1/2" Grade 8 Bolt


Cylinder Pins: 1 - 1/4" C1045 Steel Pins