J-ROLL PLOWS

J-ROLL TORSION TRIP EDGE PLOW STANDARD FEATURES

- (2) Adjustable Pitch Setting
- 4" x 4" x 3/8" Tube Push Frame Spanning 109"
- (4) Table Moldboard Hook-Up Points with 1-1/4"(5) 3/4" Diameter spring Wire Torsion-Trip Springs
- Inverted "J" Roll Moldboard available in steel or poly
- (2) Single acting 3" x 16" Reversing Cylinder
- (6) 3/4 Square spring wire torsion trip springs
J-ROLL TORSION TRIP EDGE OPTIONS
Plow Lift Options
- Chain
- Level Raise Lift System™
- Chain and Saddle
- Cable Wrap
Plow Hook-Up Options
- Quick Attach Loop
- Swivel Bar with Push Ears
- (1-¼" pins @ 30.5”)
- Husting Style
- Custom Application
Running Gear Options
- Standard-Duty Mushroom Shoes
- Heavy-Duty Mushroom Shoes
- Heavy-Duty Even Wear Shoes
- Carbide Even Wear Shoes
- 10" Steel Caster (Kingpinless) Wheels
- 5.70 x 8.0 Pneumatic Tires*
- Foam-Filled Rubber Tires*
*Should not be used with Cable Wrap Lift Assemblies
Moldboard Options
- ¾” Bottom Angle
- 7-Gauge Steel Construction
- Curb Cut (Mailbox Cut)
- Extra Ribs
- UHMW Poly Construction
Tripping Options
- Extension Trip Moldboard
- Compression Trip Moldboard
- Torsion Trip Cutting Edge
- Dual Trip Moldboard & Cutting Edge
Table Options
- Extended Push
Other Options
- Cushion Valve
- Curb Shoes
- Blade Savers - Carbide
- Blade Guides
- Rubber Snow Deflector
- Plow Stand
- Nitrided Cylinders
- Extra Extension Trip Springs
Paint Options
- Special Paint Available
J-ROLL TORSION TRIP EDGE SPECIFICATIONS
MODEL NUMBER | LENGTH | HEIGHT | CUTTING SWATH @ 35˚ | APPROXIMATE WEIGHT OF BASE UNIT | NUMBER OF SPRINGS |
10SP36TT11 | 10'0" | 36" | 8'2" | 2100 LBS | 5 |
11SP36TT11 | 11'0" | 36" | 9'0" | 2200 LBS | 5 |
12SP36TT11 | 12'0" | 36" | 9'10" | 2300 LBS | 5 |
10SP42TT11 | 10'0" | 42" | 8'2" | 2300 LBS | 5 |
11SP42TT11 | 11'0" | 42" | 9'0" | 2400 LBS | 5 |
12SP42TT11 | 12'0" | 42" | 9'10" | 2500 LBS | 5 |
10SP49TT11 | 10'0" | 49" | 8'2" | 2500 LBS | 5 |
11SP49TT11 | 11'0" | 49" | 9'0" | 2600 LBS | 5 |
12SP49TT11 | 12'0" | 49" | 9'10" | 2700 LBS | 5 |
* longer lengths available upon request
Moldboard Thickness:10 Gauge (Optional 3/16")
Moldboard Reinforcing:(10)-1/2” x 3-1/2” Ribs
Adjustable Moldboard Pitch Setting:15˚ or 5˚ off vertical
Spring Wire Size:3/4 Square
Lower Reinforcing Angle:4" x 4" x 1/2"
Trip Angle:4" x 4" x 3/4"
Trip Pin Diameter:1-7/8" Diameter
Reversing Cylinders:Chrome 3" Bore x 16" Stroke (3" Rod) Single Acting
Reversing Limits (left and right):0 to 35 degrees with Positive Stops
Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch
Pivot Pin Table to Moldboard:2-1/2" Diameter