HIGH COUNTRY TORSION TRIP EDGE
HIGH COUNTRY TORSION TRIP EDGE PLOW STANDARD FEATURES
- Deep "C" A-Frame
- (3) Adjustable Pitch Setting
- 5" x 5" 3/8" HD Square Tube Table 90" wide Push Frame, and Massive 3-1/2" Round Pivot Bushing
- (2) 1" X 2-1/2" trip connecting posts - fastened by 1-1/4" bolts,
- (5) Moldboard Hook-Up Points with 1-1/2" Thick Ribs, 3" Bearing Surface and 1-1/4" Pins
- (4) 3/4" Diameter spring wire torsion - trip springs- independently replaceable, 7/8" optional
- Extended moldboard continuously welded
HIGH COUNTRY STRAIGHT PLOW OPTIONS
- Chain
- Level Raise Lift System™
- Chain and Saddle
- Cable Wrap
Plow Lift Options
- Quick Attach Loop
- Swivel Bar with Push Ears
- (1-¼" pins @ 30.5”)
- Husting Style
- Custom Application
Plow Hook-Up Options
- Standard-Duty Mushroom Shoes
- Heavy-Duty Mushroom Shoes
- Heavy-Duty Even Wear Shoes
- Carbide Even Wear Shoes
- 10" Steel Caster (Kingpinless) Wheels
- 5.70 x 8.0 Pneumatic Tires*
- Foam-Filled Rubber Tires*
*Should not be used with Cable Wrap Lift Assemblies
Running Gear Options
- ¾” Bottom Angle
- 7-Gauge Steel Construction
- Curb Cut (Mailbox Cut)
- Extra Ribs
- UHMW Poly Construction
Moldboard Options
- Extension Trip Moldboard
- Compression Trip Moldboard
- Torsion Trip Cutting Edge
- Dual Trip Moldboard & Cutting Edge
Tripping Options
- Extended Push
Table Options
- High Carbon Steel
- Rubber
- UHMW Poly
- Carbide Insert with Cover Blade
- Flame Hardened
- PolarFlex Systems
Cutting Edge Options
All cutting edges available in various sizes
- Cushion Valve
- Curb Shoes
- Blade Savers - Carbide
- Blade Guides
- Rubber Snow Deflector
- Plow Stand
- Nitrided Cylinders
- Extra Extension Trip Springs
Other Options
- Special Paint Available
Paint Options
HIGH COUNTRY TORSION TRIP EDGE SPECIFICATIONS
| MODEL NUMBER | OVERALL LENGTH | OVERALL HEIGHT | CUTTING SWATH AT 35˚ | NUMBER OF SPRINGS |
|---|---|---|---|---|
| 10ST36TT1 | 10' | 36" | 8'2" | 2050 lbs. |
| 11ST36TT1 | 11' | 36" | 9'0" | 2115 lbs. |
| 12ST36TT1 | 12' | 36" | 9'9" | 2180 lbs. |
| 10ST42TT1 | 10' | 42" | 8'2" | 2142 lbs. |
| 11ST42TT1 | 11' | 42" | 9'0" | 2209 lbs. |
| 12ST42TT1 | 12' | 42" | 9'9" | 2276 lbs. |
| 10ST49TT1 | 10' | 49" | 9'0" | 2190 lbs. |
| 11ST49TT1 | 11' | 49" | 9'9" | 2260 lbs. |
| 12ST49TT1 | 12' | 49" | 11'6" | 2330 lbs. |
* longer lengths available upon request
Spring Wire Diameter: 3/4" (7/8" optional)
Number of Springs: 4
Adjustable Moldboard Pitch Setting: 15˚ or 5˚ or 15˚off vertical
Lower Reinforcing Angle: 4" x 4" x 1/2"
Trip Angle:4" x 4" x 1/2" reinforced with 1/2" plate gussets
Trip Pin Diameter: 1-1/4"
Trip Pin Diameter: 1-1/4"
Bonnell High Country Torsion Trip Snow Plows are designed for removing snow at high-speeds in rural areas and interstate highways. The standard extended roll moldboard is designed to move the snow to the discharge end of the plow more efficiently. This prevents the snow from blowing over the top of the plow.
Bonnell’s many standard features are what set us apart from our competition. Our torsion-trip cutting edge is designed with (4) ¾” spring wire torsion trip springs, each of which are independently replaceable without removing other springs or hinge pins. The moldboard has (3) adjustable pitch settings, allowing you to regulate the attack angle of the cutting edge. The lower reinforcing angle has (5) hinge ears welded along its bottom provided for attaching the trip lower trip section.
Plows are available with steel or poly moldboards.
Meeting the demands of Mother Nature in the winter is a tough job. You need a tough plow to get you through the harshest conditions. Bonnell High Country series snow plows will clear the way.