Straight Utility Snow Plow

 

pdf-button

  • icon
  • icon
  • icon

UTILITY STRAIGHT PLOW STANDARD FEATURES

  1. 3/8" Formed plate a-frame
  2. 3" x 3" x 1/4" tube front push frame
  3. (2) Single acting 2" x 10" reversing cylinders
  4. 1" Thick swivel skid shoes
  5. (6) Table to moldboard hook-up points with 3/4" pins
  6. 15" Extended overhang
  7. (8) 3/8" Ribs

UTILITY STRAIGHT PLOW OPTIONS

    Plow Lift Options

  • Chain
  • Level Raise Lift System™

    Plow Hook-Up Options

  • Quick Attach Loop
  • Swivel Bar with Push Ears
  • (1" pins @ 23.5”,standard))
  • Custom Application

    Running Gear Options

  • Even Wear Shoes

    Moldboard Options

  • ¾” Bottom Angle
  • Curb Cut (Mailbox Cut)
  • UHMW Poly Construction

    Tripping Options

  • Extension Trip Moldboard
  • Torsion Trip Cutting Edge
  • Dual Trip Moldboard & Cutting Edge

    Table Options

  • Extended Push

    Cutting Edge Options

  • High Carbon Steel
  • Rubber
  • UHMW Poly
  • Carbide Insert with Cover Blade
  • Flame Hardened
  • PolarFlex Systems
  • All cutting edges available in various sizes

    Other Options

  • Cushion Valve
  • Curb Shoes
  • Blade Savers - Carbide
  • Blade Guides
  • Rubber Snow Deflector
  • Plow Stand
  • Nitrided Cylinders
  • Extra Extension Trip Springs

    Paint Options

  • Special Paint Available



UTILITY STRAIGHT PLOW SPECIFICATIONS

MODEL NUMBERLENGTHHEIGHTTRIP MECHANISMCUTTING SWATH @ 35˚MOLD-BOARD TYPEAPPROXIMATE WEIGHT OF BASE UNIT
9ST31M49'0"31"MOLDBOARD7' 9-1/2"STEEL975 LBS
10ST31M410'0"31"MOLDBOARD8'8'STEEL1025 LBS
9SP31M49'0"31"MOLDBOARD7' 9-1/2"POLY975 LBS
10SP31M410'0"31"MOLDBOARD8'8"POLY1025 LBS
9ST31T49'0"31"TRIP-EDGE7' 9-1/2"STEEL1175 LBS
10ST31T410'0"31"TRIP-EDGE8'8"STEEL1225 LBS
9SP31T49'0"31"TRIP-EDGE7' 9-1/2"POLY1175 LBS
10SP31T410'0"31"TRIP-EDGE8'8"POLY1225 LBS

* longer lengths available upon request



Moldboard Thickness:10 Gauge(3/8" Poly optional on straight model only)


Moldboard Reinforcing:(8)-3/8” x 3” Vertical Ribs


Moldboard Pitch15˚off vertical


Reversing Table:3" x 2" x 1/4" Structural Tubinge


Lower Reinforcing Angle:4" x 4" x 1/2" Angle


Front Push Beam on Table:3" x 3" x 1/4" Structural Tubing


A-Frame:3/8" Steel Plate


Reversing Cylinders:2" x 10" Single Acting


Reversing Limits (left and right):30 degrees


Plow to Table Hinge Points:(5) 1-1/4" Hinge Pins, Spanning 90"


Cutting Edge:5/8" x 6" High Carbon Steel Standard Punch


Pivot Pin:1" Grade Five Bolt


Cylinder Pins:1" C1045 Steel Pins


Plow to Table Hinge Points:(6) Spanning 69", 3/4" Pins


Number of Trip Springs:(6) .400 Wire Extension Trip


Lift Chain:5/16" Hi-Test Chain


Designed for trucks with a minimum 6,500 lb. front axle weight rating on applicable trucks, the Bonnell Utility Plow is built with the same attention to detail and quality as our larger plows. These plows are light enough for commercial and industrial use, yet strong enough for the most demanding municipal plowing.

Available in steel or polyethylene with either a full-trip moldboard or trip edge, all Bonnell Straight and Tapered Utility Plows include a swivel bar with push ears, AR400 skid shoes and 5/16″ hi-test chain lift.