BONNELL 16′ X 62″ VBOX SALT SPREADER CARBON STEEL
IN STOCK BV-16-62 V-BOX SPREADER SPECIFICATIONS
|MODEL NUMBER||V-BOX LENGTH||V-BOX HEIGHT||CAB TO TRUNION||CUBIC YARD CAPACITY||APPROXIMATE WEIGHT||PRICING|
* IN STOCK SPECIFICATIONS OF V-BOX SPREADER
12.8 Cubic Yard Capacity
10-Gauge Stainless Steel Sides and Ends
7-Gauge Bolt-In Replaceable Floor
Sides Sloped 45 Degrees
Hopper Body 82" Wide
50:1 Gearbox Drive
Pintle Chain Conveyor - 3/8" x 1-1/2 Crossbars Welded Both Sides
8 Tooth Sprocket
1 1/2" Drive Shaft with Spring Loaded Take-Up
Standard Duty Top Screens
Swing-Up Spinner Assembly with 18" Steel Spinner Disc
4 Spinner Baffles - 1)Fixed, 3) Adjustable
Carbon Steel Painted Orange, All Options Painted Black
CARBON STEEL BODY
Constructed of 10-gauge steel with 45º sloping sides with 10-gauge side supports and 7-gauge longsills. Each unit comes complete with a 12″ x 18″ steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all
stainless steel internal parts.
STAINLESS STEEL BODY
Constructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available.
The 24″ wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2″ with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4″ of travel to maintain proper conveyor tension are standard.
Swing up assembly with 18″ steel spinner disc, one internal directional baffle and four external baffles – one fixed and three adjustable, which are removable without the use of tools.
Section top screens are made of 3/8″ diameter rods welded to a 1/4″ x 2″ angle iron frame creating a maximum opening of 2-1/2.”